Uniden HD9000UPVR User manual
HIGH DEFINITION DIGITAL RECEIVER
Set Top Box with Freeview™ EPG
HD9000UPVR
- 1 - © 2010 Uniden Australia Pty Ltd/Uniden New Zealand Ltd.
Safety First
Please review the following safety precautions. If this is your first time to use a digital receiver,
then read this manual before installing or using this receiver. If the receiver is not functioning
properly, please contact your local distributor or system installer.
The lightening symbol in a triangle is used to alert you to the presence of dangerous
voltages inside the receiver that may be sufficient to constitute a risk of electric shock to
anyone opening the case. It is also used to indicate improper installation or handling of
the receiver that could damage the electrical system in the receiver or in other equipment
attached to the receiver.
The exclamation point in a triangle is used to alert you to important operating and
maintenance instructions. Failure to follow these instructions could result in injury to you
or damage to the receiver.
Be careful with electricity:
zPower outlet: To prevent electric shock, make sure the electrical plug used on the receiver’s
power cord matches the electrical outlet used to supply power to the receiver. Connect the
power cord only to a power source that operates at 100~240 Volts AC, 50/60 Hz.
zPower plug: If a three-prong power plug is provided with the receiver, make sure it is used
with a properly grounded three-wire power socket.
zPower cord: Make sure the power cord is routed so that it will not be stepped on or pinched
by heavy items.
zPower overloading: Avoid overloading electrical outlets or extension cords, which otherwise
could result in electric shock or fire.
zLightening: For protection from lightening, or when the receiver is left unattended for a long
period, disconnect it from the power source.
zProtect other equipment: Unplug the receiver before connecting any other equipment,
especially the antenna. Connect all equipment to the receiver before plugging any power
cords to the power source.
WARNING!
RISK OF ELECTRICAL
SHOCK
DO NOT OPEN
WARNING:
TO REDUCE THE RISK OF ELECTRICAL
SHOCK
DO NOT REMOVE THE COVER
NO USER-SERVICEABLE PARTS ARE
INSIDE
REFER SERVICING TO QUALIFIED
PERSONNEL
- 2 - © 2010 Uniden Australia Pty Ltd/Uniden New Zealand Ltd.
Also follow these precautions:
zVentilation: Do not block the ventilation slots on the receiver, or place any heavy object on top
of it. Blocking the airflow could damage the receiver. Arrange components so that air can flow
freely around the receiver. Ensure that there is adequate ventilation if the receiver is placed in
a stand. Put the receiver in a properly ventilated area, away from direct sunlight or any source
of heat.
zOverheating: Avoid stacking the receiver on top of a hot component such as a power
amplifier.
zRisk of Fire: Do not place the receiver on top of any easily combustible material, such as
carpet or fabric.
zProper Connections: Make sure all cables and equipment are connected to the receiver as
described in this manual.
zObject Entry: To avoid electric shock, never stick anything in the slots on the case or
remove the cover.
zWater Exposure: To reduce the risk of fire or electric shock, do not expose the receiver to rain
or moisture.
zPlastic Protective Film: Receivers when shipped have a protective thin plastic film over the
Front Panel; this plastic film should be removed and discarded.
Trademark Information
Ϩ
Manufactured under license from Dolby Laboratories, “Dolby” and the
double-D symbol are trademarks of Dolby Laboratories.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
DVB and the DVB logo are registered trademarks of the DVB project.
- 3 - © 2010 Uniden Australia Pty Ltd/Uniden New Zealand Ltd.
Table of Contents
Safety First............................................................................................................................................. 1
Table of Contents ................................................................................................................................... 3
Introduction ............................................................................................................................................ 4
Package Contents......................................................................................................................... 4
Key Features................................................................................................................................. 5
Parts of the Uniden HD9000UPVR System...........................................................................................6
Front Panel ................................................................................................................................... 6
Rear Panel .................................................................................................................................... 7
Remote Control...................................................................................................................................... 8
System Installation............................................................................................................................... 10
Connecting To TV Monitor And Audio & Video Devices....................................................................... 10
Aspect Ratio Setting .............................................................................................................................11
Recommended Settings........................................................................................................................11
Switching on for the First Time ............................................................................................................ 12
Viewing Channels ................................................................................................................................ 13
The Information Plate (or I-Plate) ............................................................................................... 13
Freeview EPG: Electronic Programme Guide ..................................................................................... 15
Recording TV Programmes ................................................................................................................. 16
Format the USB Storage Drive ................................................................................................... 16
Scheduled Recording ................................................................................................................. 17
Approximate Recording Times ................................................................................................... 19
Playback Recorded TV Content .......................................................................................................... 20
Main Menu Map ................................................................................................................................... 24
Main Menu ........................................................................................................................................... 25
Channels..................................................................................................................................... 25
Settings ....................................................................................................................................... 27
Setup........................................................................................................................................... 30
System ........................................................................................................................................ 31
Trouble Shooting.................................................................................................................................. 38
Glossary............................................................................................................................................... 40
Product Specification: .......................................................................................................................... 42
One Year Limited Warranty.................................................................................................................. 43
- 4 - © 2010 Uniden Australia Pty Ltd/Uniden New Zealand Ltd.
Introduction
The Uniden HD9000UPVR Set-Top-Box is an MPEG-4 compliant High Definition (HD) receiver,
capable of receiving and recording high definition and standard definition (SD) TV programmes
from free-to-air terrestrial broadcasts (DVB-T) in accordance with the FREEVIEW specification
phase two.
The user friendly On-Screen-Display (OSD) allows you to setup your receiver to enjoy both high
and standard definition channels with crystal clear picture and stereo sound quality.
Package Contents
Unpack the receiver and verify that all of the following items are included.
NOTE
zHD9000UPVR High Definition MPEG-4 Terrestrial Receiver
zRemote Control Unit (with 2x AAA batteries)
zOwner’s manual
zAC adapter
zComposite (RCA) Video/Audio Cable
If any items are missing or damaged, contact your place of purchase immediately.
- 5 - © 2010 Uniden Australia Pty Ltd/Uniden New Zealand Ltd.
Key Features
• USB Record/Playback*:
Record or playback your favourite programs from an external USB Storage Drive (not
included)
• On Screen Display (OSD):
Easy to use Menu system displays key information on screen
• Remote Control:
Fully functional Remote Control
• MHEG5 Electronic Programme Guide (EPG):
7 days of programme guide support.
• Record Scheduler:
Schedule up to 6 hours of recording
• Video and audio connection capabilities:
HDMI, Component Video, Composite Video and Audio S/PDIF (digital audio out)
connections
• Plug and Play setup
Plug in a USB flash drive to view your favourite jpeg (jpg) photos
• Simultaneous HD/SD output
Connect HDMI to an HDTV for HD and at the same time connect composite or component
to a standard TV for SD
• DVB Compliant:
Decodes MPEG-2 and MPEG-4/AVC formats
• Multiple Video Format Modes:
HD - 1080i/720p, SD - 576p/576i
• Multiple Aspect Ratio Modes:
16:9, 4:3 Letter Box and 4:3 Centre Cut
Includes Active Format Descriptor (AFD) modes;
AFD 16:9 Wide, AFD 4:3 Letter Box and AFD 4:3 Centre Cut
• Channel Locked Function
Parental Rating with PIN code access
• USB 2.0 support for software upgrade
- 6 - © 2010 Uniden Australia Pty Ltd/Uniden New Zealand Ltd.
Parts of the Uniden HD9000UPVR System
Front Panel
XPower button:
Toggles the HD9000UPVR between power-on (green LED) and standby (red LED) modes.
YChannel button:
Switch to the next channel.
ZChannel button:
Switch to the previous channel.
[
USB Port:
For connection of a USB Storage Drive (USB Flash Drive, USB single SD card reader or
USB Hard Disk Drive).
NOTE
USB Storage Drive is not included.
- 7 - © 2010 Uniden Australia Pty Ltd/Uniden New Zealand Ltd.
Rear Panel
XRF In/ RF Out:
RF Input for an external antenna/RF Out (loop through) for an external device.
YVideo Out: Composite Video (CVBS):
For Standard Definition Televisions - Connect the Composite Video cable to the yellow
coloured video jack, or if available connect the Component Video cable to the red, blue
and green coloured video jacks.
ZAudio Out: L/R:
One pair is provided for use with the Composite Video outputs.
[HDMI:
For connection to an HDTV which has HDMI input for optimum viewing capability. HDMI
output supports 1080i, 720p, 576p and 576i video formats and supports Dolby down-mix 2
channel audio.
\S/PDIF Optical:
For connection to an amplifier equipped with a Dolby Digital decoder.
]ENET:
For connection to Internet of Interaction channel “Catch up TV” service.
^Power Supply:
Power Adapter DC5V 3A input (100~240 VAC, 50~60 Hz).
- 8 - © 2010 Uniden Australia Pty Ltd/Uniden New Zealand Ltd.
Remote Control
The remote control provides easy access to all of the receiver’s functions, including selecting
channels and using the menus. It uses infrared signals, and must be operated within seven
meters from the receiver.
When using the remote control, make sure there is a direct line of sight to the receiver.
NOTE
The batteries for the remote control are packaged separately; please install these batteries in the
remote control before using the receiver. Note the “+” and “-“ signs on the batteries to ensure that
the batteries are inserted with the correct polarity into the remote control. To avoid damage to the
remote control, discard any depleted or old batteries.
Although the receiver can be operated from the buttons on the front panel, many of the
receiver’s functions can only be accessed using the remote control.
Table of contents
Other Uniden Receiver manuals
Uniden
Uniden Bearcat BC 210XLT User manual
Uniden
Uniden BC95XLT Instruction Manual
Uniden
Uniden BC95XLT User manual
Uniden
Uniden UDS100 User manual
Uniden
Uniden UST 6000 User manual
Uniden
Uniden UST7000 User manual
Uniden
Uniden UBC370CLT User manual
Uniden
Uniden BCD436HP User manual
Uniden
Uniden HomePatrol-2 User manual
Uniden
Uniden MR 8100 User manual
