TRENDnet TE100-DX32Rplus User manual
TE100-DX16R/DX24R/DX32R
16/24/32 Ports
Ethernet/Fast Ethernet
Dual-Speed Stackable Hubs
User’s Guide
Rev. 01 (JULY, 1998)
505-0100-004
Printed In Taiwan
RECYCLABLE
Dual-Speed Stackable Hubs User’s Guide
ii
FCC Warning
This equipment has been tested and found to comply with the lim-
its for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used
in accordance with this user’s guide, may cause harmful interfer-
ence to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his
own expense.
CE Mark Warning
This is a Class A product. In a domestic environment, this prod-
uct may cause radio interference in which case the user may be
required to take adequate measures.
iii
TABLE OF CONTENTS
ABOUT THIS GUIDE .............................................................1
Conventions .................................................................................1
Overview of the User's Guide ......................................................1
CHAPTER 1 : INTRODUCTION.................................................3
Product Description.....................................................................3
Product Features .........................................................................4
CHAPTER 2 : UNPACKING AND SETUP ...................................7
Unpacking....................................................................................7
Identifying External Components ...............................................8
Front Panel....................................................................................i
Rear Panel..................................................................................10
Installing the Hub .....................................................................11
Installation.................................................................................11
Rack Mounting ...........................................................................11
CHAPTER 3 : UNDERSTANDING INDICATORS.........................13
Hub State Indicators.................................................................14
Port State Indicators.................................................................15
CHAPTER 4 : MAKING CONNECTIONS ..................................17
Dual-Speed Stackable Hubs User’s Guide
iv
Hub Cascading/Building a Stack.............................................17
Connectivity Rules.....................................................................18
Hub to End-Station Connection................................................19
Hub-to-Hub Uplink....................................................................21
Module Installation...................................................................23
APPENDIX A : CABLES AND CONNECTORS...........................25
100BASE-TX Ethernet Cable and Connectors..........................25
Crossover Cables........................................................................26
APPENDIX B : SPECIFICATIONS ...........................................29
General.......................................................................................29
Hub-to-Hub Cascading..............................................................30
LED Indicators..........................................................................30
Environmental and Physical.....................................................30
About This Guide 1
0 ABOUT THIS GUIDE
This guide discusses how to install and use the 16/24/32 port dual-
speed stackable Ethernet/Fast Ethernet Hubs
Conventions
References in this manual to the 16/24/32 port dual-speed stack-
able Ethernet/Fast Ethernet Hubs are frequently written simply
as “hub” or “hubs” where the text applies to all models. Model
names are normally used only to differentiate between models
where necessary.
Unless differentiated by model name, all information applies to all
models.
Overview of the User’s Guide
♦Chapter 1, Introduction. Provides information on Fast
Ethernet networks, and introduces the features of the
16/24/32 port dual-speed stackable Ethernet/Fast Ethernet
Hubs.
♦Chapter 2, Unpacking and Setup. Helps you get started in
setting up the hub.
Dual-Speed Stackable Hubs User’s Guide
About This Guide
2
♦Chapter 3,Understanding Indicators. Describes all LED
indicators on the hub’s front panel. Understanding these
indicators is essential to effectively using the hub.
♦Chapter 4, Making Connections. Provides information on
connecting to the hub’s twisted-pair, stacking hubs, and
linking with other 100BASE-TX or 10BASE-T hubs.
♦Appendix A, Cables and Connectors. Provides specifications
on the cables and connectors used with the hubs.
♦Appendix B, Specifications. Lists the hub’s specifications.
Introduction 3
1
1 INTRODUCTION
This chapter introduces the 16/24/32 port dual-speed stackable
Ethernet/Fast Ethernet Hubs, as well as giving some background
information about the technology of the hubs use.
Product Description
The dual-speed stackable Ethernet/Fast Ethernet hubs described
in this manual are designed to allow easy migration and integra-
tion between 10Mbps Ethernet and 100Mbps Fast Ethernet, while
providing manageability and flexibility in cable connections.
These hubs can operate with either IEEE 802.3 10BASE-Tcon-
nections (twisted-pair Ethernet operating at 10 megabits per
second), or IEEE 802.3u 100BASE-TX connections (twisted-pair
Fast Ethernet operating at 100 megabits per second). All of the
twisted-pair ports support NWay auto-negotiation, allowing the
hub to automatically detect the speed of a network connection.
This means you can connect all of your Ethernet and Fast
Ethernet hosts to any hub in the series, without any rewiring re-
quired when a host is upgraded from 10Mbps to 100Mbps.
The hubs in the series, available in 16-port, 24-port and 32-port
models, can be stacked with up to four hubs in a stack. A stack of
four 32-port hubs gives a total of 128 Ethernet or Fast Ethernet
Dual-Speed Stackable Hubs User’s Guide
Introduction
4
ports. An 16/24/32 port dual-speed stackable Ethernet/Fast
Ethernet Hubs stack operates as a Class II Fast Ethernet re-
peater, allowing it to be linked to another Class II Fast Ethernet
stack in the same collision domain.
In the basic configuration, the 10Mbps and 100Mbps segments are
separate but it can be intercommunicate. Because each unit has
built-in switch, so it can be intercommunicate and stacking up to
four units.
Add-in module is also available, providing 100BASE-FX connec-
tion. The hubs in this series each have one slot for slide-in
module.
Product Features
The list below highlights the features and specifications of hubs in
the series.
♦Compatible with the IEEE 802.3 10BASE-TEthernet and
802.3u 100BASE-TX, 100BASE-FX Fast Ethernet industry
standards for interoperability with other Ethernet/Fast
Ethernet network devices.
♦Ethernet connections support Category 3 or better twisted-
pair cables.
♦Fast Ethernet connections support both shielded twisted
pair and Category 5 unshielded twisted-pair cables.
♦Fast Ethernet connections support a maximum distance of
100 meters from end-station to hub, and a total network di-
ameter of 205 meters.
♦16, 24 or 32 NWay RJ-45 ports for connecting stations to the
network.
Introduction
5
♦Built-in switch allows bridging between 10Mbps and
100Mbps segments.
♦LED indicators for Power, FX Link/Rx, 100M Activity, 10M
Activity, 10M Collision, 100M Collision, Switch Activity,
10M Link/Rx, and 100M Link/Rx.
♦Two proprietary daisy-chain ports for cascading up to four
hubs to form one logical hub.
♦Uplink port allows easy linking of two Fast Ethernet hub
stacks to further expand your network.
♦Standard-size (19”, 1U height), rack mountable
♦Optional slide-in module: 100BASE-FX (see Chapter 4 :
Making Connections).
♦The total bandwidth of each stack is up to 140Mbps that
includes one 100Mbps segment and four 10Mbps segments.
(If per stack has stacking four units)
Other manuals for TE100-DX32Rplus
1
This manual suits for next models
3
Table of contents
Other TRENDnet Switch manuals
TRENDnet
TRENDnet TEG-S224TXA - 26PORT Gigabit Copper Switch 24-10/100... User manual
TRENDnet
TRENDnet TPE-224WS - Web Smart PoE Switch User manual
TRENDnet
TRENDnet TEG-424WS User manual
TRENDnet
TRENDnet TK-401R User manual
TRENDnet
TRENDnet TEG-224WSplus User manual
TRENDnet
TRENDnet TE100-S800i User manual
TRENDnet
TRENDnet TPE-S88 - Web Smart PoE Switch User manual
TRENDnet
TRENDnet TUC-H4E User manual
TRENDnet
TRENDnet TE100-SK3 Owner's manual
TRENDnet
TRENDnet TEG-S081FMi User manual
TRENDnet
TRENDnet TPE-224WS - Web Smart PoE Switch User manual
TRENDnet
TRENDnet TE-800plus User manual
TRENDnet
TRENDnet TE100-H8E User manual
TRENDnet
TRENDnet TE100-DX16E User manual
TRENDnet
TRENDnet TK-1603R User manual
TRENDnet
TRENDnet TEG-S50G User manual
TRENDnet
TRENDnet TL2-E284 User manual
TRENDnet
TRENDnet TK-1602R User manual
TRENDnet
TRENDnet TK-423K User manual
TRENDnet
TRENDnet TK-1602R User manual
