TRENDnet TV-IP612P User manual
Quick Installation Guide
TV-IP612P
1.01
Table of Contents
Version 08.20.2010
English 1
1. Before You Start
2. 2
3. 7
1
Hardware Installation and Configuration
Power over Ethernet (PoE) Installation
Troubleshooting 9
1. Before You Start
?
?
?VGAResolution: 800 x 600 or above
?Web Browser: Internet Explorer (6.0 or higher)
?Router
?An available DHCP Server –routers usually have a built-in DHCPserver
?Power over Ethernet (PoE) Switch (e.g. TPE-80WS) (Optional)
?Injector (e.g TPE-111GI) (Optional)
Acomputer with a wired network adapter properly installed
CD-ROM Drive
Package Contents
?
?CD-ROM (Utility and User’s Guide)
?Multi-Language Quick Installation Guide
?Cat. 5 Ethernet Cable (1.5m/5ft.)
?Mounting Kit
?PowerAdapter (12V DC, 2A)
TV-IP612P
System Requirements
1
Note: TheTV-IP612P only works with Power over Ethernet (PoE) devices
that follow the IEEE 802.3af standard.
Supported Operating Systems CPU Memory
Windows 7 (32/64-bit)
Windows Vista (32/64-bit)
Windows XP (32/64-bit) / 2000 1.3GHz or above 1GB RAM or above
512MB RAM or above
256MB RAM or above
1.3GHz or above
1.3GHz or above
2. Hardware Installation and Configuration
1. Insert the Utility CD-ROM into your CD-ROM
drive.
2
Note:
1．It is recommended that you configure the IP Camera from a wired computer.
2．If you would like to use IPViewPro 2.0 software, please install the software by
clicking the Install IPView Pro 2.0 in theAutorun window and refer to the User's
Guide on the CD for more information
2. Click Run autorun.exe (Windows 7/Vista only).
3. Click Setup Wizard.
4. Click Next. Then follow the Setup Wizard
instructions.
3
6. Double click on the SetupWizard icon on your
desktop.
5. Click Close.
9. Click Next.
7. Connect a RJ-45 network cable from a
Switch/Router to the Ethernet port on the IP
Camera.
8. Connect the PowerAdapter to the IP Camera
and then to a power outlet.
10. Select the IP camera and click Next.
10. Enter your ID and password. Then click Next.
By default:
ID: admin
Password: admin
4
12. Configure the Camera Name and Camera
Time. Click Copy Local Time to automatically
configure the Camera Time to match your
computer. Then click Next.
13. If you would like to change the administrator
password, click Change Password, enter a
new password, retype the new password and
then click Next. Leave Change Password
unchecked if you do not wish to change the
password.
Note: Password is limited to up to 8 characters.
14. Select DHCP and then click Next.
15. Click Next.
16. Please wait while the settings on your cameras
are being saved.
5
17. Click on the following URLor click Link to
open up the browser configuration.
18. Enter the User name and Password, and then
click OK. By default:
User Name: admin
Password: admin
19. Click Live View to view live video.
20. Right click on the information bar and select
Install ThisAdd-on for All Users on This
Computer. (Internet Explorer 8)
21. Click Install. (Internet Explorer 8)
22. Right click on the information bar and select
RunAdd-on (Internet Explorer 6/7).
6
23. Click Run (Internet Explorer 6/7).
25. Use the command icons to control the IP
camera.
24. Live Video will now appear.
Your installation is complete
Register Your Product
To ensure the highest level of customer service and support, please take a moment to
register your product Online at: www.trendnet.com/register
Thank you for choosing TRENDnet
For detailed information regarding the TV-IP612P configuration and advanced settings,
please refer to the Troubleshooting section, User's Guide on the Utility CD-ROM, or
TRENDnet's website at http://www.trendnet.com.
7
3. Power over Ethernet (PoE) Installation
Using the TV-IP612P with a PoE switch
2. Verify that the LINK (RED) and Power (Solid
Blue) LEDs are on.
1. Connect a RJ-45 cable from the Power Over
Ethernet switch (e.g. TPE-80WS) to the LAN
port on the IP Camera.
8
Using the TV-IP612P with an Injector (TPE-111GI)
4. Verify that the LINK (RED) and Power (Solid
Blue) LEDs are on.
1. Connect the Power Cord to the Injector. Then
connect the Power Cord to an outlet.
2. Connect a CAT-5e/6 cable from a switch to the
TPE-111GI's DATA IN port.
3. Connect a CAT-5e/6 cable from the TV-IP612P
to the TPE-111GI's DATA OUT port.
Other manuals for TV-IP612P
2
Table of contents
Other TRENDnet Security Camera manuals
TRENDnet
TRENDnet TV-IP400 User manual
TRENDnet
TRENDnet TV-IP420P User manual
TRENDnet
TRENDnet TV-IP329PI User manual
TRENDnet
TRENDnet TV-IP312 User manual
TRENDnet
TRENDnet TV-IP121WN User manual
TRENDnet
TRENDnet TV-IP313PI User manual
TRENDnet
TRENDnet TV-IP612P User manual
TRENDnet
TRENDnet TV-IP400 User manual
TRENDnet
TRENDnet TV-IP200 Instruction Manual
TRENDnet
TRENDnet TV-IP201 User manual
TRENDnet
TRENDnet TV-IP314PI User manual
TRENDnet
TRENDnet TV-IP512WN - ProView Wireless N Internet Surveillance... User manual
TRENDnet
TRENDnet TV-IP612WN User manual
TRENDnet
TRENDnet TV-H400 User manual
TRENDnet
TRENDnet TV-IP862IC User manual
TRENDnet
TRENDnet TV-IP600 User manual
TRENDnet
TRENDnet TV-IP1315PI User manual
TRENDnet
TRENDnet TV-IP602WN User manual
TRENDnet
TRENDnet TV-IP301W User manual
TRENDnet
TRENDnet SecurView TV-M7110WK User manual
