Topfield TRF-2100 User manual

TOPFIELD

TRF-2100

User Manual

High Definition

Digital Terrestrial Receiver

Personal Video Recorder

Default PIN: 0000

Full Guide is available at

http : //www. topf ield . corn.

EV3

Digital Video

Broadcasting

Precau ioris

•

Clean with a dry cloth only.

•

Do not block any of the ventilation openings.

•

When placed in a cabinet, make sure there is a minimum

space of 10 centimetres around it.

•

Do not install near any heat sources or in direct sunlight as

this will impair cooling.

•

Do not operate this product near water.

•

Do not try to change the plug or defeat its safety purpose.

•

This product is designed for indoor use only.

•

Place the digital receiver on a firm and level surface.

•

Do not lay any objects such as magazines on this unit.

•

Do not overload power outlets. Doing so may result in a risk

of fire or electrical shock.

•

Never open this unit's casing under any circumstances, or the

warranty will be void.

•

Unplug this unit during lightning storms or when unused for

long periods of time.

•

Refer all servicing to qualified service personnel. Reverse en-

gineering or disassembly is prohibited.

•

Batteries, including those which contain no heavy metals,

may not be disposed with other household wastes. Please dis-

pose of used batteries in an environmentally sound manner.

Find out the legal regulations which apply in your area.

•

The mains plug shall remain readily operable so that it can be

removed easily to disconnect the power.

•

Operate the digital receiver at temperatures between 0 to

45°C.

•

Check the mains voltage before plugging the digital receiver

to the wall socket. For the power specification, refer to the

table below.

Input voltage

90 to 240 V AC, 50/60 Hz

Power consumption 24W at maximum in active

Under 1W in passive standby

Blinks every time you press a

button on the remote control.

Switch to the previous or next service.

VAI.

Lights up in standby mode.

Switches between standby mode and active mode.

ANT IN

Terrestrial broadcasting signal input socket

(5V, Max.100mA)

ANT OUT

Terrestrial broadcasting signal output socket through the ANT IN socket for

another digital receiver

Y/Pb/Pr

Component video output socket for the television set

(green/blue/red)

AUDIO

L/R

Stereo audio output socket for the television set or the audio-video receiver

(white/red)

VIDEO

Composite video output socket for the television set

(yellow)

S/PDIF

Digital audio output socket for the audio-video receiver

HDMI

Audio and video output socket for the high definition television set

USB

USB port for firmware update and data transfer.

(USB 2.0 Host, 5V DC, 500mA Max.)

POWER

Power jack

NOTE

The actual images and

the

number Of button's could be different depending on the type of remote

, , ,

control provided by the manufacturer.

button switches the digital receiver be-

tween standby mode and active mode.

is used to set a sleep timer in 10 minute

increments.

buttons decrease or increase the vol-

ume. They are also used to change values for

menu options.

10 El (;

mutes the sound. Press again to switch it

back on.

1111

11 (P-1--)

buttons switch

to the previous or next

P —

service. They are also used to navigate in menus

and interactive screens.

(

) switches over between the current service

and the previously viewed one.

Numeric

buttons are used to enter a service

number for service change or to specify values

for menu options.

(OK)

displays the services list. It is also used to

select a menu item.

(FAV) displays the favourite lists.

displays the service information box. It is

also used to display more information about a

programme.

is used to select an audio track and a sound

mode.

is used to select a subtitle track.

is not used in this model.

V.Format

changes video resolution.

GUIDE

switches over between television services and radio services.

displays the electronic programme guide.

AUX)

is not used in this model.

(A/R)

changes aspect ratio.

(SAT)

has different functions per menu.

displays the main menu. It is also used to return to the previous menu from a sub-

menu.

is used to exit a menu or to hide on-screen information.

is used to start recording.

is used to stop playback, to stop recording, or to jump back to live television from time-

shifted television.

is used to display the list of recorded programmes that are stored in the internal hard

drive.

resumes normal playback speed, or displays the progress bar for navigation on play-

back or time-shift. To play a recorded programme, see button

pauses live television or playback of a recorded programme.

is used to start reverse playback. Subsequent presses increase the rewind speed.

is used to start fast forward playback. Subsequent presses increase the playback speed.

is used to start slow motion playback. Subsequent presses change the playback speed.

is used to jump back to the beginning of the recording on playback.

is used to jump to the end of the recording on playback.

has different functions per menu.

is used to make a bookmark on playback or time-shift.

is used to jump to next boolcmark position.

has different functions per menu.

Functions of the colour buttons will be guided on the screen.

EEl

Eli

174

FAI

1E11

EXIT

REAR OF DIGITAL RECEIVER

red

l white

REAR OF

DIGITAL

RECEIVER

AUDIO CABLE

white

REAR OF TV

AUDIO

.a.

red

Connect any components before plugging the power cord into the wall outlet. If you encounter

any problems setting up your product, please contact your local retailer.

1 Connect the antenna cable to the ANT IN socket.

2 Choose a setup that matches the connection ports on your TV.

- We recommend using the HDMI connection for the highest quality HD picture.

- For a higher quality use the component connection.

- For a basic connection to your television use the composite connection.

HDMI connection (HDMI)

REAR OF TV

REAR OF DIGITAL RECEIVER

Component connection (YPbPr)

blue green red

A A A

blue green red

COMPONENT CABLE

red

white

REAR OF TV

yellow

red

white

AUDIO CABLE

REAR OF

DIGITAL

RECEIVER

yellow

COMPOSITE CABLE

c) Composite connection (VIDEO)

1 After having connected the appropriate cables from the digital receiver to your TV, make sure

the power cord of the digital receiver is plugged into a wall socket.

2 Check that your TV set is turned on.

3 Check that your TV set is on the correct video channel so that you can see the Menu from the

Digital Receiver.

4 Insert the batteries into the remote control.

5 Press the 0 button on the remote control to turn the Digital Receiver on.

6 The main menu will appear on your screen.

Now it's time to scan your channels, using

your remote highlight Installation.

7 Now highlight Searching and press (OK] but-

ton.

8 Set the Search Mode to Auto then move

down to Start Search and press (OK) button.

9 Once all the channels have been searched

you will be told how many channels have

been found.

Press (OK) button and then EXIT button.

1 Press the (

tings, press OK.

2 Press OK on top of Time.

3 Make sure the Mode is set to Auto. Use left

or Right keys beside OK button.

4 Now head down to Time offset and adjust it

to the following depending on which state

you

reside.

•

NSW, TAS, VIC: Time offset = 10:00

•

SA, NT: Time offset = 09:30

•

QLD: Time offset = 10:00

•

WA: Time offset = 08:00

button, and then go to Set-

NOTE

With daylight saving you will need to add 1 hour to the above settings, or turn Daylight Saving

Time' to On.

Electronic programme guide

1 Now that the service search is complete,

press the [OK) button to view the services list.

2 On the services list, press the (PH

or P— but-

ton to navigate your desired service.

You can also switch to your desired service

by entering its service number with the nu-

meric buttons.

3 To select a service to watch, press the (OK)

button.

1 Press the GUIDE button to display the elec-

tronic programme guide (EPG).

2 To see detailed information of a desired pro-

gramme, put the highlight bar on the pro-

gramme with the r 1 or n button and

press the (

) button.

3 To switch to another service, press the

[P-0

or (P—)button.

Timer Recording via Guide

You can also setup a record timer from the guide. This is like setting a timer recording from the

reservation screen.

1 Press the [GUIDEJ button to display the EPG (Electronic Programme Guide)

2 Highlight a show you want to record with the navigation buttons.

3 To make a timer recording, press the 0 button on the selected show, then a red R is displayed.

4 If you want to edit the timer, press 0 a second time to adjust its settings.

When you have finished adjusting the setting go down to OK, then press (OKI

NOTE

The free to air EPG (Electronic Program Guide) guide does not automatically populate.

To populate the EPG. guide on every channel you must visit each service/channel at least once

a week for a few minutes or until the guide has fully populated for the full seven days.

EPG updates can also occur while you are watching TV and jumping from channel to channel.

•.

Instant recording

1 Press the

button on the live screen to

start recording.

2 VVhen recording has started, press the 0

again to set the recording duration as shown

in the left figure.

3 While recording, you can watch or record

another service. To record another service,

switch to the service and press the 0 .

•

Duration: Set the desired recording duration with the V— and n buttons and press the

(oK)

button; the recording will end at the specified time.

•

After this program: If the information about the next programme is provided by the elec-

tronic programme guide, the current recording will stop at the time when the current pro-

gramme is scheduled to end.

•

After next program: The current recording will stop at the time when the next programme

is scheduled to end.

To stop recording, press the 0 button; then

a box like the left figure appears, which shows

the programmes currently being recorded.

Select recording by using navigation buttons

then press (OK) button to stop the recording.

Other manuals for TRF-2100

Table of contents

Other Topfield Receiver manuals

Topfield

Topfield SRP-2401CIplus Service manual

Topfield

Topfield TF4000COC User manual

Topfield

Topfield TF 5000 CI Plus User manual

Topfield

Topfield TF6000T User manual

Topfield

Topfield TF 6000 CR User manual

Topfield

Topfield SRP-2411 User manual

Topfield

Topfield TF6500F User manual

Topfield

Topfield TRC-1400 Service manual

Topfield

Topfield TF 7710 HTCI User manual

Topfield

Topfield TF 5800 PVR User manual

Topfield

Topfield TF 4400 PVRt User manual

Topfield

Topfield TF 4410 PVRt User manual

Topfield

Topfield TF 600 PVRc User manual

Topfield

Topfield TF 6700 IRc User manual

Topfield

Topfield FREE TO AIR TF3100FEi User manual

Topfield

Topfield TF 5500 PVR User manual

Topfield

Topfield TBF-7300 User manual

Topfield

Topfield TF 5400 PVR Combo User manual

Topfield

Topfield SBI-2070 User manual

Topfield

Topfield SRP-2110 User manual

Topfield

Topfield TF6000F User manual

Topfield

Topfield TF 5100 PVR User manual

Topfield

Topfield TF MMDS100 User manual

Topfield

Topfield TF 6000 Fe User manual

Popular Receiver manuals by other brands

Garmin

Garmin GA 23 Owner's manual and reference guide

Aiphone

Aiphone PS-12F instructions

IMES

IMES TCS-01CA-PMI Original Operating Instruction

BWI Eagle

BWI Eagle AIR-EAGLE SR Product information bulletin

AMIMON

AMIMON AMN12310 WHDI datasheet

Dual

Dual DMCPA79BT Installation & owner's manual

Sound Associates

Sound Associates SA652P Operation manual

Sherwood

Sherwood NewCastle R-772 Service manual

Audio

Audio A10-RX Series user guide

AllSee

AllSee PushShare PSRV1.1 user manual

DEMAG

DEMAG DRC-DR D2 operating instructions

Teleco

Teleco TVRCL868A02 manual

Bosch

Bosch RF3222E installation instructions

Kramer

Kramer 631R user manual

Xpress

Xpress xmc10 installation guide

JVC

JVC KD-MR1BTS instruction manual

Omega Engineering

Omega Engineering UWTC-REC3 user guide

e-survey

e-survey E300 Pro user manual