Toa C-CV454D-9 CU User manual
Thank you for purchasing TOA Outdoor Day/Night camera: Wide, Standard, or Tele.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
Wide
Standard
Tele
Outdoor Day/Night Camera
C-CV454D-3 CU
C-CV454D-9 CU
C-CV454D18 CU
INSTRUCTION MANUAL
2
TABLE OF CONTENTS
1. SAFETY PRECAUTIONS ............................................................................... 3
2. GENERAL DESCRIPTION ............................................................................. 5
3. HANDLING PRECAUTIONS .......................................................................... 5
4. NOMENCLATURE ............................................................................................. 6
5. INSTALLATION AND CONNECTIONS ...................................................... 7
6. ADJUSTMENT ................................................................................................. 12
7. ABOUT MODE SETTING SWITCH
7.1. Focus adjustment switch .................................................................................. 15
7.2. Backlight compensation switch ........................................................................ 15
7.3. Flickerless switch ............................................................................................. 15
7.4. ATW/AWB selection switch .............................................................................. 16
7.5. Mode selection switch ...................................................................................... 16
8. TROUBLESHOOTING .................................................................................... 17
9. SPECIFICATIONS ............................................................................................ 18
Accessories ............................................................................................................. 19
3
1. SAFETY PRECAUTIONS
• Before installation or use, be sure to carefully read all the instructions in this section for correct and safe
operation.
• Make sure to observe the instructions in this manual as the conventions of safety symbols and messages
regarded as very important precautions are included.
• We also recommend you keep this instruction manual handy for future reference.
Safety Symbol and Message Conventions
Safety symbols and messages described below are used in this manual to prevent bodily injury and property
damage which could result from mishandling. Before operating your product, read this manual first and
understand the safety symbols and messages so you are thoroughly aware of the potential safety hazards.
• To prevent lightning strikes, install the unit at least five meters away from a lightning rod, and yet within the
protective range (angle of 45°) of the lightning conductor. Lightning strikes may cause a fire, electric shock
or personal injury.
• Install the unit only in a location that can structurally support the weight of the unit and the mounting bracket.
Doing otherwise may result in the unit falling down and causing personal injury and/or property damage.
• Use nuts and bolts that are appropriate for the ceiling's or wall's structure and composition. Failure to do so
may cause the unit to fall, resulting in material damage and possible personal injury.
• Tighten each nut and bolt securely. Ensure that the bracket has no loose joints after installation to prevent
accidents that could result in personal injury.
• Avoid installing the unit in locations exposed to sea breeze or corrosive gas. The unit or its mounts may be
subject to corrosion, that might cause it to fall or result in other accidents.
• If any of the following irregularities occurs, immediately switch off the power, and inform the shop from where
the unit was purchased. Further using the unit may result in fire or electric shock.
· If you detect smoke or a strange smell coming from the unit.
· If water or any metallic object gets into the unit
· If the unit falls, or the unit case breaks
· If the connection cable is damaged (exposure of the core, disconnection, etc.).
· If it is malfunctioning (no tone sounds when an optional microphone unit is connected.).
· If it is malfunctioning (no image appears.).
• Do not insert nor drop metallic objects or flammable materials inside the unit, as this may result in fire or
electric shock.
• Do not mount the unit in locations exposed to constant vibration. The mounting screws and/or bolts may be
loosened by excessive vibration, potentially causing the unit to fall, which could result in personal injury.
• To prevent a fire or electric shock, never open nor remove the unit case as there are high voltage
components inside the unit. Refer all servicing to qualified service personnel.
Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury.
WARNING
4
• Leave the installation of the unit to your TOA dealer because the installation requires expert experience and
skills. The unit may fall off if incorrectly installed, resulting in possible personal injury.
• Do not stand or sit on, nor hang down from the unit as this may cause it to fall down or drop, resulting in
personal injury and/or property damage.
• Be sure to inspect the unit periodically for safety use. Deterioration of the installed part may cause dropping
of the unit, resulting in personal injury and/or property damage. Contact your TOA dealer as to the periodical
inspection.
• Avoid touching the unit's sharp metal edge to prevent injury.
• Switch off the power for safety purposes when cleaning or leaving the unit unused for 10 days or more.
Doing otherwise may cause a fire or electric shock.
Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.
CAUTION
Note
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/ TV technician for help.
Modifications
Any modifications made to this device that are not approved by TOA Corporation may void the authority
granted to the user by the FCC to operate this equipment.
CU version complies with Part 15 of the FCC Rules.
5
2. GENERAL DESCRIPTION
The TOA C-CV454 series are outdoor Day/Night cameras equipped with a 1/3" CCD.
A lineup of cameras with three types of lenses, Wide, Standard, and Tele allows accurate monitoring over a
wide range from near to distant subjects depending on the installation location.
Noise reduction function enables clear image to be viewed in lower noise under poor lighting conditions.
It functions as a color camera in the daytime and as a high-sensitivity monochrome camera in darkness,
making it ideal for installation in locations that require around-the-clock monitoring.
Its dust-proof and waterproof (IP66) construction permits it to be mounted to an outdoor wall or ceiling without
using a special device.
Angle of the camera unit can be adjusted freely regardless of installation location, allowing a wider area to be
viewed.
The C-CV454 series' power is supplied from 24 V AC or 12 V DC external power source.
3. HANDLING PRECAUTIONS
• Do not direct the camera lens to the sun, strong lighting, or reflected light. If strong light enters the lens, this
may cause the CCD's internal color filter to deteriorate, leading to image discoloration.
• Do not give the camera a great shock or vibration to avoid camera damage.
• It is recommended that the camera be always used in locations where the ambient temperature ranges from
-
10°C to +50°C and humidity levels of less than 90% to ensure that no condensation is formed.
• To clean, wipe with a dry soft cloth. Never use benzene, thinner or chemically processed towel as the
camera's plastic or other parts may be deformed or discolored.
• When dust has settled on the camera's lens, lightly clean using a commercial camera blower or cleaning
paper.
• Installing the camera cables in close proximity to fluorescent lamps or other electrical appliances can
downgrade the picture quality. In such cases, change the wiring.
• If there is a strong electric or magnetic field near the camera, such as television transmission antennas,
motors or transformers, this may distort or roll the monitor picture. In such cases, run the entire wiring route
through metal conduit tubing.
• When using an optional microphone unit, avoid installing it near air-conditioner outlet vents or in such high-
noise.
• When the camera shoots a subject projected by an infrared illuminator in a dark place, its mode may
frequently switch between color and black-and-white. This is due to intensive light from the infrared
illuminator. In such cases, change the illuminator’s projection angle to reduce the amount of light on the
subject.
• When operating on 12 V DC, use the external power supply rated at 12 V DC and over 1.0 A.
6
(1)Vari-focal lens
(2)Sunshade
(3)Front cover
(4)Mounting bracket (accessory)
(5)Safety wire mounting hole
(6)Sunshade fixing screw
(7)Bracket mounting bolt (accessory)
(8) Monitor output terminal (RCA jack)
(9)Zoom ring fixing screw
(10)Focus ring fixing screw
(11)Focus ring
(12)Zoom ring
(13)Mode setting switch
(14)Iris control
(15)Cable with waterproof cap (accessory)
(16)Video output terminal
(17)Camera head fixing plate
(18)Camera head fixing screw
9
10
8
1611 12 13
14
15
12
34
5
6
7
ATW
D / N
AWB
COLOR
F.AD J
BLC
1/1001/60
ON
OFF
IRIS
LH
HEAD
FIXING
17 18
[View with sunshade, front cover, and mounting bracket detached] [View with waterproof cap detached]
4. NOMENCLATURE
[Appearance]
Note
The C-CV454D18 differ in positions of the focus ring and zoom ring from those above, being (11)Zoom ring
and (12)Focus ring.
7
[Ceiling mounting example] [Wall mounting example]
Bracket mounting bolt
with washer, stainless
steel (accessory)
Camera mounting bolt
M8 or W3/8
Safety wire
mounting hole
Note
Install a safety wire as needed.
Select the wire considering its length, diameter, and hook strength.
1. Check the mounting bracket’s installation location, and determine its mounting direction and position.
Depending on the installation location, installation options are available as shown in the examples 1 - 3.
97.6 mm
φ10.5 mm
φ50 mm
φ76 mm
120°
70°
96 mm
4-6 x 12 mm
12 mm
5. INSTALLATION AND CONNECTIONS
Install the unit only in a location that can structurally support the
weight of the unit and the mounting bracket. Doing otherwise may
result in the unit falling down and causing personal injury and/or
property damage.
WARNING
8
Camera mounting bolt
M8 or W3/8
Camera mounting bolt
M8 or W3/8
[Example 3: Mounting to a ceiling or wall]
If only fine adjustment of camera angle is required;
[Example 2: Mounting on a wall]
If angle which Example 1 can not cover is required;
Camera mounting bolt
M8 or W3/8
Anti-rotation screw
(tapping screw)
Note
Installing the mounting bracket using only one camera
mounting bolt may cause the bracket to rotate or the
bolt to come loose. Be sure to secure it with an anti-
rotation screw (tapping screw).
[Example 1: Mounting to a ceiling or wall]
9
3. Install the camera unit to the mounting bracket using the supplied insulating spacers and Bracket mounting
bolts (with washer, stainless steel).
Note
Be sure to position the insulating spacers between the bracket and bolt, as induction voltage or noise may be
produced at the joints depending on installation conditions.
Also, do not remove the insulating washers attached to the mounting bracket.
Mounting bracket Bracket mounting bolts
(with washer, stainless steel)
Insulating spacer
The insulating washers are attached
to the mounting bracket.
2. Install an anchor nut into a ceiling or a wall, then secure the mounting bracket.
Anchor nut
M8 or W3/8
Plain washer
Camera mounting bolt
M8 or W3/8
Spring washer
Mounting bracket
Ceiling
Anchor nut
M8 or W3/8
Plain washer
Camera mounting bolt
M8 or W3/8
Spring washer
Mounting bracket
Ceiling
Anti-rotation screw
(tapping screw)
10
Fit the waterproof cap
(shaded area) into place.
5. Attach the waterproof cap to the camera unit.
Note
If the waterproof cap is not secured to the mounting surface, water or moisture soaks in, causing the corrosion
of the BNC connector. This may cause unit failure. Check to be sure that the waterproof cap is secured as
shown below.
4. Connect the connector.
Connect the connector of the supplied cable with waterproof cap to the camera unit's video output terminal,
then tighten the lock screw of the connector.
Notes
• To meet the waterproof requirements, insert the connector in place until it will not go any further.
• Wrap self-adhesive butyl rubber tape around cable joints in order to prevent rain from soaking in.
Connector
(waterproof type) Waterproof cap
Video output terminal Supplied cable
Cable joints
UL 1095#22 Black/White (non-polar)
Connect to the monitor.
Connect to the AC mains.
BNC jack BNC plug
Lock screw
This manual suits for next models
2
Table of contents
Other Toa Security Camera manuals
Toa
Toa C-CV14-CS User manual
Toa
Toa C-CV24-2 NTSC User manual
Toa
Toa C-CV24-3 CU User manual
Toa
Toa C-CC364 User manual
Toa
Toa C-CV14-CS User manual
Toa
Toa C-CC514 NT User manual
Toa
Toa C-CH100 User manual
Toa
Toa C-CC704 Operating and installation instructions
Toa
Toa Netcansee N-CC2360 User manual
Toa
Toa C-CV102-CS User manual
Toa
Toa Netcansee N-CC2360 User manual
Toa
Toa C-CV854D-3 CE User manual
Toa
Toa Netcansee N-CC2564 User manual
Toa
Toa C-CC714 NT User manual
Toa
Toa C-CV202-F3 User manual
Toa
Toa Q-CV24VP-3 User manual
Toa
Toa C-CV24-3 User manual
Toa
Toa C-CV44-3 NTSC User manual
Toa
Toa C-CC514 Installation guide
Toa
Toa N-VT1010 L User manual
