Titan Controls EOS 702603 User manual

EOS®

120V High Amperage Digital

Humidity Controller

Instruction Manual

Part # 702603

www.titancontrols.net

120V High Amperage Digital Humidity Controller

• Warnings and Cautions

• Factory Settings

• Eos® 120V High Amperage Digital Humidity Controller Overview

• Instructions for Operation

• Error Codes

• Controller Specifications

• Controller Diagrams

• Installation Options

• Installation Example

• Warranty Information

• Service & Repair Program

Warnings & Cautions

• Read all instructions before operating controller.

• Do not put your controller in an area where it can get wet or sprayed.

• Mount your controller securely to the wall.

• When using “bug bombs” in area, cover controller and sensor completely to avoid corrosion.

• There are no serviceable parts in controller. Do not attempt to repair the unit.

• Breaking tamper proof seal will void your warranty.

• Do not put paper clips, tools, etc. into unit. Possible electrocution may occur.

• Plug controller into surge protector to avoid potential damage to the unit.

• Confirm that your power source is 120 Volts/20 Amps prior to plugging controller into outlet.

• Check that all equipmentthat will be activated by this controller is the proper voltage.

• Verify that the equipment you are controlling does not exceed a total of 20 amps.

• This controller is designed for “inside use” only.

• Use caution if operating controller in extremely humid environments (90% rH and above).

• Do not use controller for purposes otherthan the unit was designed to function.

• Use controller within defined environmental specifications.

• Ask your Dealer for tips and techniques regarding the use of this controller.

• Be conscientious when disposing of any products.

Factory Settings

• Humidity Day Settings: 50% rH

• Humidity Night Settings: 50% rH

• Humidity Dead-Band:5% rH

Eos® 120V High Amperage Digital

Humidity Controller Overview

The Eos®120V High Amperage Digital Humidity Controller is used tocontrol humidify or

dehumidify device. You can set your desired day and night relative humidity by adjusting the

knobs on the front of unit. The adjustment of dial rangesfrom 5% rH to 90% rH. After setting

the knobs at the preferred setting, the controller will maintain thatsetting utilizing a 5%

differential or dead-band. This Eos®unit provides up to 20 amps of capacity on standard 20

amp 120 volt circuit.

Instructions for Operation

Humidity Mode Program

Press both knobs for 3 seconds, turn to select. Press both knobs again to save the setting.

Humidify Mode: Raises the rH% to a level above the desired set point.

Dehumidify Mode: Lowers the rH% to a level below the desired set point.

Day & Night Humidity Set Point

Press each knob and turn to set the Day and Night humidity, press again to confirm the

setting.

Humidity Dead-Band (hysteresis): 5% rH

For example, when using Dehumidify, if the set-point is 45% rH and the dead-band is 5%,

the Humidity output will activate at or above 45% rH and will deactivate at 40% rH. For

Humidify mode, if the set-point is 45% rH, the output will activate at or below 45% rH and

deactivate at 50% rH

Humidity Min/Max Recall

Click both humidity (Day or Night) knobsto display the Humidity min/max rH record. This

shows the lowest rH and highest rH levels for a 24 hour period. The screen will return to

normal display after 5 seconds or by a pressing both knobs, and the record will be reset.

Day and Night Mode

Day Mode: Humidity device works when the photocell senses light.

Night Mode: Humidity device works when the photocell senses darkness.

24 Hours: Humidity device works during both day and night. This option utilizes both the

programmed DAY and NIGHT humidity settings. In 24 hours mode, the settings are locked

and cannot be adjusted. The controller must be switched to DAY or NIGHT modeto change

the humidity setting.

Error Codes

Check the sensor connection and verify that it is clean and free of debris

If the humidity sensor doesn’t observe the set point being reached in a 2 hour time

period, the screen will flash with error code. Press any knob to reset error

Please check if the appliance outlet has exceeded the controller ’s max amperage

rating (20 A)

Controller Specifications

•Max Amp: 20 amps @ 120V 60Hz

•Sensor Cord Length: 15 ft

•Humidity Range: 5% -90% rH

•Humidity Accuracy: +/-3% rH

•Humidity Dead-Band (Hysteresis): 5% rH

•Weight: 2.1lbs

•Dimensions: 5.07” x 4.68” x 1.95”

•

Indoor Use Only

•Operating Temperature: 50° F to 95° F

•Maximum Relative Humidity: 95%

Controller Diagrams:

Humidity

Humidify Mode

Humidify Device

Humidify

Set point

Deadband

TIME

OFF OFF

ON ON

Dehumidify Mode

Dehumidify Device OFF OFF

Dehumidify

Set point

Deadband

Humidity

TIME

Installation Options

Option 1: Secure the unit to a wall

Option 2: Screw the controller to the grow tent tube with a U bolt

Installation Example

Remote Sensor

120 Volt

120V

20Amps

Circuit

Warranty Information

•Titan Controls®warrants the original purchase of this product against defects in material

and workmanship under normal use for two (2) years from the date of purchase.

•During the warranty period, Titan Controls®will, at our option, and without charge, repair or

replace this product if the controller or any of its components fail or malfunction.

•All returns or repairs must be accompanied by a Return Merchandise Authorization

(RMA) number prior to any service of the product.

•This warranty is expressly in lieu of all other warranties, expressed or implied, including

the warranties of merchantability and fitness for use and of all other obligations or

liabilities on the part of the seller.

•This warranty shall not apply to this product or any part thereof which had been damaged by

accident, abuse, misuse, modification, negligence, alteration or misapplication.

•Controllers with serial numbers or date tags that have been removed, altered or

obliterated; broken seals or that show evidence of tampering; mismatched board serial

numbers or nonconforming parts, are excluded from coverage.

•Titan Controls®makes no warranty whatsoever in respect to accessories or parts

not supplied by Titan Controls®.

•Monetary refunds of the warranty will not be given.

•The Buyer assumes all responsibility regarding the use & installation of this controller.

•All warranty service is provided through the factory or an authorized service representative.

•This warranty shall apply only tothe United States, including Alaska, Hawaii and territories

of the United States and Canada.

•Defective controllers need to be returned with the “proof of purchase/receipt”.

•For additional warranty information, contact a Titan Controls®Technical Service

Representative at 888-808-4826or your Dealer. Our normal business hours are Monday –

Friday, 8 a.m. to 5 p.m. Pacific Standard Time. We are closed most major holidays.

•NOTE: Titan Controls®is a manufacturer of environmental controls. All sales offerings to the

public are donethrough a nationwide group of Dealers. No sales offerings will be made

directly to the general public.

Service and Repair Program

•For all service and repairs please contact one of our Technical Service Representatives

for a Return Merchandise Authorization (RMA) number.

•All factory service & repairs will be completed within 48 hours of receipt of controller and

after authorization by customer for repairs.

•Titan Controls®will, at its discretion, repair or replace the controller.

•Factory calibration services are available for all Titan Controls®.

•Returning Units: Please contact your retail store for returns.

Include the following if returning directly to Titan Controls®

• Proof of purchase • This completed form • RMA # on the outside of the box

Return Merchandise Authorization Number (Required): ____________________________________________

Company Name: ____________________________________________________________________________________

Contact Name: _____________________________________________________________________________________

Address: __________________________________________________________________________________________

____________________________________________________________________________________________________

Phone #: ___________________________________________________________________________________________

Email address: _______________________________________________________________________________

What is the nature of the problem? ______________________________________

___________________________________________________________

Shipping address will be given when the RMA # is issued:

WARRANTY SERVICE: Please read warranty information ﬁrst

If after reviewing the troubleshooting tips the unit will still not work, you should return it to the Dealer

where you purchased it. They will be able to further evaluate the unit and test its various components

and quite possibly will be able to identify and/or ﬁx any problems. If the Dealeris unable to ﬁx the

unit, they will return it to us for factory repair.

If there are no Dealers inyour area, you may contact us directly for technical support. If we cannot

help you resolve the problem over thephone, we will issue you a RMA # (return merchandise

authorization) authorizing you to return the unit to us for factory reconditioning (if the unit is under

warranty). Contact the number below for a RMA and shipping address. Complete the form below

and include itwith your unit. Also please write the RMA # on the outside of the box.

Please package the unit inits original packaging. If it is damaged in shipment we cannot be

responsible.

Once we receive the unit back, we will repair it within 48 hours (business) and return it to you freight

prepaid via UPS ground shipment.

www.titancontrols.net

For technicalassistance call us at 1-888-80-Titan or 1-888-808-4826.

Representative available Monday–Friday, 8 a.m. – 5 p.m. PST.

www.titancontrols.net

Notes:

_________________________________________________

________________________________________________

1 Square = ____ Foot / Feet

VANCOUVER, WASHINGTON U.S.A.

Revision C–09/28/2017 © Titan Controls®

Table of contents

Other Titan Controls Controllers manuals

Titan Controls

Titan Controls 8 Light Controller User manual

Titan Controls

Titan Controls Mercury 3 Product information sheet

Titan Controls

Titan Controls Hades 2 User manual

Titan Controls

Titan Controls Helios 16 User manual

Titan Controls

Titan Controls Helios 3 User manual

Titan Controls

Titan Controls Helios 3 User manual

Titan Controls

Titan Controls Helios 9 User manual

Titan Controls

Titan Controls Atlas 3 User manual

Titan Controls

Titan Controls Oceanus 1 User manual

Titan Controls

Titan Controls Helios 7 User manual

Titan Controls

Titan Controls Eos 1 User manual

Titan Controls

Titan Controls Helios 17 User manual

Titan Controls

Titan Controls Helios 14 User manual

Titan Controls

Titan Controls SPARTAN Series User manual

Titan Controls

Titan Controls CO2 Regulator User manual

Titan Controls

Titan Controls Medusa 703380 User manual

Titan Controls

Titan Controls HELIOS 3 Product information sheet

Titan Controls

Titan Controls Nyx 1 User manual

Titan Controls

Titan Controls Kronus 4 User manual

Titan Controls

Titan Controls Helios 11 User manual

Titan Controls

Titan Controls SOARTAN Series User manual

Titan Controls

Titan Controls Helios 10 User manual

Titan Controls

Titan Controls Helios 12 User manual

Titan Controls

Titan Controls Helios 13 User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual