Titan Controls 8 Light Controller User manual

www.titancontrols.net

INNOVATING SINCE 1995

8 Light Controller

With Light Timer

240 Volts

Product #703008

Instruction Manual

Warnings & Cautions

• Read all instructions before operating!

• Do not put your controller in an area where it can get wet or sprayed.

• When using “bug bombs,” controller should be completely covered to avoid corrosion.

• There are no serviceable parts in the controller. Do not attempt to repair the unit.

• Do not put paperclips, tools, etc. into unit. Possible electrocution may occur.

• Make sure to verify your power source prior to wiring controller into power source.

• Check that all equipment that will be activated by this controller is 240 Volts.

• This controller is designed for “Indoor Use” only.

• Avoid placing the controller near heat sources.

• Do not use when operating controller in extremely humid environments.

• Do not use controller for purposes other than the intended function.

• This controller is designed for use with MAGNETIC OR ELECTRONIC BALLASTS.

• Mount your controller securely to the wall using hardware provided.

• Use controller within dened environmental specications.

• Ask your Dealer for tips and techniques regarding the use of this controller.

• Be conscientious when disposing of any products.

8 Light Controller – With Light Timer

Overview

The Spartan 8 Light Controller is designed to operate a lighting system. The controller is

built with a heavy duty relay and powder coated steel enclosure to control your ballasts.

The controller should be installed by a certied electrical professional.

8 Light Controller

This manual covers the following:

• Warnings & Cautions

• 8 Light Controller Overview

• Instructions for Operation

• Controller Specications

• Troubleshooting Tips

• Application Diagram

• Service and Repair Program

• Warranty Information

Caution:

Lamps are hot and should be allowed to cool a

minimum of 15 minutes before handling.

ONLY FOR USE WITH 240 VOLT EQUIPMENT!

Instructions for Operation

The 8 Light Controller must be installed by a licensed

electrician or you will void your warranty!

DO NOT install this controller by yourself. High voltage

is dangerous!

• Securely mount your 8 Light Controller.

• A UL listed 50 Amp circuit breaker must be installed in this application.

• Remove front panel of controller

• Connect your incoming 240 volt power to the terminal block of the 8 Light Controller.

• Attach the ground wire to the “Grounding Lug” of the 8 Light Controller.

• Verify that all your wiring connections are tight and that no loose wires are exposed.

• Plug your ballasts into the universal outlets on the right and left side of the 8 Light

Controller.

• Securely attach the front panel of the 8 Light Controller to avoid potential shock or

injury before initiating power to controller.

• Set your timing pattern by pushing 15 minute “trippers” to the outer portion of dial

to set the “ON” time.

• Push 15 minute “trippers” towards inner portion of dial to set the “OFF” time.

• Now adjust the 24 hour timer to the current time of day using the black triangle

to set the current time.

• Select the mode: O: Always off, : Timer on, I : Always on

• Make sure that all wires and cables have been properly secured.

• Activate single phase 240 volts/60Hz. power to the 8 Light Controller.

• When the relays are activated via the external 24 hour timer, you will hear a “CLUNK”

sound and your lights will come “ON”.

• Your 8 Light Controller will now control your lights at the desired settings until the

power is defeated.

Troubleshooting Tips

If the 8 Light Controller is not performing as expected, try the following:

a. Contact a certied Electrician to service your 8 Light Controller.

b. Conrm that your power input is active from your power panel and providing

240 volts/60Hz/50 Amps Input to the controller.

c. Check the voltage input using a voltage test meter to verify power is owing to

the controller.

d. Make sure all of your connections are tight. Loose connections can cause “arcing”.

e. After activating relay, conrm that power is active and proper at your 240 Volt outlets.

f. Verify that your power cords and ballasts are functioning properly and that there are

no shorts or arcing occurring.

g. Check ballasts & lights in known 240 volt power source to verify they are working

properly.

h. Still having problems with your 8 Light Controller? Please contact our Technical

Service Representative at (888) 808-4826 to assist you further.

Controller Specifications

• Main Power Voltage = 240 volts

• Wire = Minimum 8 AWG Wire (75° C Cu Wire ONLY)

• Maximum Wattage = 8,000 Watts (1000 Watts per outlet)

• Maximum Input Amperage = 50 Amps

• Maximum Output Amperage = 40 Amps

• Relay Coil Voltage = 120V AC

• Hertz = 60Hz

• Receptacle Type = Universal

• Operating Temperature = 40- 25° F (4.5 - 52° C)

• Storage Temperature = 32-135° F (0 - 57° C)

• Size = 14.76” H x 13.47” W x 5.15” D

• Weight = 13.0 lbs

• RoHS compliant = Yes

Notes

Application Diagram

Sun System® Reector

240V AC Ballast

Sun System® Reector

240V AC Ballast

240V AC Ballast Sun System® Reector

Sun System® Reector

240V AC Ballast

Sun System® Reector

Service and Repair Program

• For all service and repairs please contact one of our Technical Service Representatives

for a Return Merchandise Authorization (RMA) number, at 1-888-808-4826. Our normal

business hours are Monday – Friday, 8 a.m. to 5 p.m. Pacic Standard Time. We are

closed most major holidays.

• All factory service & repairs will be completed within 48 hours of receipt of controller

and after authorization by customer for repairs.

• Titan Controls®will, at its discretion, repair or replace the controller.

• Factory calibration services are available for all Titan Controls®

• Returning Units: Please contact your retail store for returns.

Warranty Information

• Titan Controls®warrants the original purchase of this product against defects in material

and workmanship under normal use for one (1) year from the date of purchase.

• During the warranty period, Titan Controls®will, at our option, and without charge,

repair or replace this product if the controller or any of its components fail or malfunction.

• All returns or repairs must be accompanied by a Return Merchandise Authorization

(RMA) number prior to any service of the product.

• This warranty is expressly in lieu of all other warranties, expressed or implied,

including the warranties of merchantability and tness for use and of all other

obligations or liabilities on the part of the seller.

• This warranty shall not apply to this product or any part thereof which had been damaged

by accident, abuse, misuse, modication, negligence, alteration or misapplication.

• Controllers with serial numbers or date tags that have been removed, altered or

obliterated; broken seals or that show evidence of tampering; mismatched board

serial numbers or nonconforming parts; are excluded from coverage.

• Titan Controls®makes no warranty whatsoever in respect to accessories or parts not

supplied by Titan Controls®

• Monetary refunds of the warranty will not be given.

• The Buyer assumes all responsibility regarding the use & installation of this controller.

• All warranty service is provided through the factory or an authorized service representative.

• This warranty shall apply only to the United States, including Alaska, Hawaii and

territories of the United States and Canada.

• Defective controllers need to be returned with the “proof of purchase” receipt.

• For additional warranty information, contact your Dealer, or a Titan Controls®Technical

Service Representative at 1-888-808-4826. Our normal business hours are Monday –

Friday, 8 a.m. to 5 p.m. Pacic Standard Time. We are closed most major holidays.

• NOTE: Titan Controls®is a manufacturer of environmental controls. All sales offerings

to the public are done through a nationwide group of Dealers. No sales offerings will

be made directly to the general public.

WARRANTY SERVICE: Please read warranty information first

If after reviewing the troubleshooting tips the unit will still not work, you should return

it to the Dealer where you purchased the controller. They will be able to further evaluate

the unit and test its various components and quite possibly will be able to identify

and/or x any problems. If the Dealer is unable to x the unit, they will return it to us

for factory repair.

If there are no Dealers in your area, you may contact us directly for technical support.

If we cannot help you resolve the problem over the phone, we will issue you a RMA #

(return merchandise authorization) authorizing you to return the unit to us for factory

reconditioning (if the unit is under warranty). Contact the number below for a RMA and

shipping address. Complete the form below and include it with your unit. Also please

write the RMA # on the outside of the box.

Please package the unit in its original packaging. If it is damaged in shipment we cannot

be responsible.

Once we receive the unit back, we will repair the controller within 48 hours (business)

and return it to you freight prepaid via UPS ground shipment.

Include the following if returning directly to Titan Controls®

• Proof of purchase • This completed form • RMA # on the outside of the box

Return Merchandise Authorization Number (Required)

Company Name:

Contact Name:

Address:

Phone #:

Email address:

What is the nature of the problem?

Shipping address will be given when the RMA # is issued.

For technical assistance call us at

1-888-80-Titan or 1-888-808-4826.

www.titancontrols.net

INNOVATING SINCE 1995

www.titancontrols.net

Table of contents

Other Titan Controls Controllers manuals

Titan Controls

Titan Controls Helios 11 User manual

Titan Controls

Titan Controls Oceanus 1 User manual

Titan Controls

Titan Controls Helios 9 User manual

Titan Controls

Titan Controls CO2 Regulator User manual

Titan Controls

Titan Controls Helios 3 User manual

Titan Controls

Titan Controls Helios 3 User manual

Titan Controls

Titan Controls SPARTAN Series User manual

Titan Controls

Titan Controls Helios 7 User manual

Titan Controls

Titan Controls Atlas 3 User manual

Titan Controls

Titan Controls Helios 10 User manual

Titan Controls

Titan Controls EOS 702603 User manual

Titan Controls

Titan Controls Helios 6 User manual

Titan Controls

Titan Controls Kronus 4 User manual

Titan Controls

Titan Controls Nyx 1 User manual

Titan Controls

Titan Controls Medusa 703380 User manual

Titan Controls

Titan Controls HyperioN 2 User manual

Titan Controls

Titan Controls Helios 12 User manual

Titan Controls

Titan Controls Mercury 2 Product information sheet

Titan Controls

Titan Controls Helios 17 User manual

Titan Controls

Titan Controls ATLAS 9 User manual

Titan Controls

Titan Controls SPARTAN Series User manual

Titan Controls

Titan Controls HELIOS 3 Product information sheet

Titan Controls

Titan Controls Helios 13 User manual

Titan Controls

Titan Controls Helios 16 User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual