Texas Instruments TAS5782M User manual

SLAU708–March 2017

TAS5782M Evaluation Module

User's Guide

SLAU708–March 2017

TAS5782M Evaluation Module

(1) The PPC3 User Manual is only available after requesting the PPC3 software.

(2) Power supply minimum voltage can be lower than stated depending on the version of PPCMB used. PPCMB rev. E and earlier requires

greater than 9.02 V. PPCMB rev. F and later requires greater than 4.5 V.

This user’s guide describes the operation of the TAS5782M Evaluation Module (EVM). The EVM is

connected to the PurePath™ Console Motherboard (PPCMB). The main contents of this document

include:

• Hardware descriptions and implementation

Related documents:

• TAS5782M data sheet (SLASEG8)

• PurePath Console Motherboard User’s Guide (SLOU366)

• PPC3 User Manual (1)

• PurePath Graphic Development Suite (PurePath Console)

• TAS5782M Process Flows (SLAA737)

Required equipment and accessories:

1. TAS5782MEVM

2. PurePath console motherboard

3. A USB micro type-B cable

4. Power supply unit (PSU) 9.5 – 26.4 VDC (2)

5. Speakers and cables

6. Desktop or laptop running Microsoft®Windows®7, Windows 8, or Windows 8.1

7. Audio source: This can be a DVD player with appropriate SPDIF cable or playback media from

Windows 7, Windows 8, or Windows 8.1

Contents

1 Hardware Overview.......................................................................................................... 3

2 Hardware Setup.............................................................................................................. 6

3 Software Overview........................................................................................................... 8

4 Troubleshooting ............................................................................................................ 20

5 Board Layouts, Bill of Materials, and Schematic....................................................................... 21

List of Figures

1 TAS5782MEVM.............................................................................................................. 3

2 Device Manager ............................................................................................................. 4

3 Default Format ............................................................................................................... 5

4 PPCMB and TAS5782MEVM Connection................................................................................ 6

5 PBTL Configuration.......................................................................................................... 7

6 PBTL Connection at EVM .................................................................................................. 7

7 PBTL Connection to Speaker.............................................................................................. 7

8 PPC3 Download Window................................................................................................... 8

9 PPC3 Window................................................................................................................ 9

10 Installed EVM Apps........................................................................................................ 10

11 TAS5782M Home Page................................................................................................... 11

www.ti.com

2SLAU708–March 2017

Submit Documentation Feedback

TAS5782M Evaluation Module

12 System Checks Page...................................................................................................... 12

13 Direct I2C Page, I/O Tab................................................................................................... 13

14 Direct I2C Page, Log Tab.................................................................................................. 14

15 Audio I/O Page ............................................................................................................. 15

16 Register Map Page ........................................................................................................ 16

17 End System Integration Page ............................................................................................ 17

18 Header File Generation.................................................................................................... 18

19 In-System Debugging...................................................................................................... 19

20 In-System Tuning .......................................................................................................... 20

21 TAS5782MEVM Schematic (1 of 3) ..................................................................................... 21

22 TAS5782MEVM Schematic (2 of 3) ..................................................................................... 22

23 TAS5782MEVM Schematic (3 of 3) ..................................................................................... 23

24 TAS5782MEVM Top Composite Assembly............................................................................. 24

25 TAS5782MEVM Bottom Composite Assembly......................................................................... 25

List of Tables

1 TAS5782MEVM Bill of Materials ......................................................................................... 26

Trademarks

PurePath is a trademark of Texas Instruments.

Microsoft, Windows are registered trademarks of Microsoft Corporation.

All other trademarks are the property of their respective owners.

www.ti.com

Hardware Overview

SLAU708–March 2017

TAS5782M Evaluation Module

1 Hardware Overview

The TAS5782MEVM showcases the latest TI digital input class-D closed loop amplifier. The TAS5782M is

an I2S or TDM input class-D amplifier with up to 96-kHz processing. The EVM is used in conjunction with

the PPCMB. The PVDD supply is provided via the TAS5782MEVM and is regulated to 5 VDC and 3.3

VDC on the PPCMB. The PPCMB provides the I2S, I2C, and 3.3 VDC to the TAS5782MEVM.

Figure 1. TAS5782MEVM

1.1 Features

• GUI control via USB port

• Stereo and mono channels with I2S input

• Processed and non-processed mono channel I2S input

• Operates in BTL or PBTL

1.2 Functions

The TAS5782MEVM is controlled by the PPCMB. The digital audio data input to the TAS5782MEVM is

sent from PPCMB and is selectable from USB audio, optical SPDIF, coaxial SPDIF, PSIA (external I2S),

and analog ADC sources.

Hardware Overview

www.ti.com

4SLAU708–March 2017

Submit Documentation Feedback

TAS5782M Evaluation Module

1.3 Detailed Operations

Upon power-on, the PPCMB uses USB audio input (default). The I2S signals LRCLK, SCLK, SDIN and

MCLK come from the TAS1020B. foobar2000 or similar non-processing media source can be used to

stream audio. The TAS1020B enumerates as the following device on a Microsoft Windows operating

system (OS): USB audio (USB-AudioEVM), Human Interface Devices, and USB Composite Device, see

Figure 2.

Figure 2. Device Manager

www.ti.com

Hardware Overview

SLAU708–March 2017

TAS5782M Evaluation Module

USB audio output quality can be configured as shown in Figure 3. The user must select "2 channel, 16 bit,

48000 Hz (DVD Quality)".

Figure 3. Default Format

Hardware Setup

www.ti.com

6SLAU708–March 2017

Submit Documentation Feedback

TAS5782M Evaluation Module

2 Hardware Setup

Step 1. Connect the PPCMB to the TAS5782MEVM.

Step 2. Connect speakers to the TAS5782MEVM.

Step 3. Connect a PSU to the TAS5782MEVM and turn on the power. 5-V and 3.3-V LEDs (Yellow)

are illuminated. The USB Lock LED (Blue) is also illuminated. The PSU voltage range is 9.5

to 26.4 VDC.

Step 4. Plug in a USB cable from the PC to the PPCMB.

Step 5. If an optical SPDIF source is used, the blue SPDIF clock-locked LED is illuminated.

Figure 4. PPCMB and TAS5782MEVM Connection

2.1 PBTL Hardware Setup

1. The EVM and PPCMB need to be disconnected from the power supply.

2. Set J10 and J11 on the EVM to PBTL mode (right position)

3. Connect speaker terminals (J4 and J9) to the speaker in PBTL mode (See Figure 7).

4. Power up the EVM and it will now operate in PBTL mode.

NOTE: The EVM has two devices (U1 and U2), only the bottom one (U2) can operate in PBTL

mode.

www.ti.com

Hardware Setup

SLAU708–March 2017

TAS5782M Evaluation Module

Figure 5. PBTL Configuration

Figure 6. PBTL Connection at EVM

Figure 7. PBTL Connection to Speaker

2.2 I2C Device Addresses

The default I2C addresses on the EVM are set to 0x90 for the top device (U1) and 0x92 for the bottom one

(U2).

Software Overview

www.ti.com

8SLAU708–March 2017

Submit Documentation Feedback

TAS5782M Evaluation Module

3 Software Overview

3.1 PurePath Console 3 (PPC3)

PurePath™ Console 3 (PPC3) is a software platform for Texas Instruments’ audio devices. Many of these

audio devices can be configured, tuned, and validated. This platform has the ability to support a number of

TI audio devices with features that make the audio tuning experience more intuitive and exciting. Request

access on http://www.ti.com/tool/PUREPATHCONSOLE.

Once approval is given, go to www.ti.com/mysecuresoftware to download the software. After login, users

will see this webpage with a similar list of software products available for download.

Figure 8. PPC3 Download Window

www.ti.com

Software Overview

SLAU708–March 2017

TAS5782M Evaluation Module

Run the installation program. Also, download the PPC3 User Manual (after requesting the PPC3 software)

for further instructions. The following window is displayed when PPC3 is launched for the first time.

When the window in Figure 9 is displayed, click on “sign in” to see TAS5782 EVM application. Click on

TAS5782M box to download TAS5782M EVM App. Installation window will pop up, then click “Install”.

Figure 9. PPC3 Window

Software Overview

www.ti.com

10 SLAU708–March 2017

Submit Documentation Feedback

TAS5782M Evaluation Module

After installation, TAS5782 EVM box will appear in “Installed EVM Apps” section, see Figure 10. Click on

TAS5782 box to launch TAS5782 App.

Figure 10. Installed EVM Apps

Table of contents

Other Texas Instruments Control Unit manuals

Texas Instruments

Texas Instruments TAS3208EVM-LC User manual

Texas Instruments

Texas Instruments TPS7A78EVM-011 User manual

Texas Instruments

Texas Instruments XIO2001 User manual

Texas Instruments

Texas Instruments ADS5231 EVM User manual

Texas Instruments

Texas Instruments UCC28056EVM-296 User manual

Texas Instruments

Texas Instruments Stellaris LM3S818 User manual

Texas Instruments

Texas Instruments TPA6100A2 User manual

Texas Instruments

Texas Instruments TSU6721EVM User manual

Texas Instruments

Texas Instruments THS3061EVM User manual

Texas Instruments

Texas Instruments AFE79 Series Assembly instructions

Texas Instruments

Texas Instruments TPS54362B EVM User manual

Texas Instruments

Texas Instruments DRV2605LEVM-MD User manual

Texas Instruments

Texas Instruments 2000 series User manual

Texas Instruments

Texas Instruments TPS7B8401EVM User manual

Texas Instruments

Texas Instruments TLVM13660 User manual

Texas Instruments

Texas Instruments ADS1202 User manual

Texas Instruments

Texas Instruments TPS2390EVM User manual

Texas Instruments

Texas Instruments TPA6017A2 User manual

Texas Instruments

Texas Instruments DLPDLCR660TEVM User manual

Texas Instruments

Texas Instruments TSW12QJ1600 User manual

Texas Instruments

Texas Instruments DAC8574 User manual

Texas Instruments

Texas Instruments TPA701DR User manual

Texas Instruments

Texas Instruments TPS53515 User manual

Texas Instruments

Texas Instruments DRV591 User manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual