Texas Instruments EVMK2E User manual

EVMK2E Evaluation Module

Quick Start Guide

EVMK2E Evaluation Module

No Functionality

On board XDS200 USB

JTAG(MIPI-60) connector for SoC

COM1 : SoC UART Console

COM2 : BMC UART Console

BMC Reset : Resets the microcontroller

and will reset the entire board

Dip switch for boot configuration :

1111 : No Boot mode/JTAG DSP Little Endian

0010 : NOR SPI ARM Master Boot

USB3 PORT 1(Device and HOST Modes)

USB3 PORT 0(HOST only)

USB control of both SOC COM1 & BMC COM2

1 press: safe shutdown of SOC;

2 presses within 0.5sec: warm reset;

3 presses within 0.5sec: full reset;

4 presses within 0.5sec: cancel reset

C H

http://www.silabs.com/Support%20Documents/Software/Linux_3.x.x_VCP_Driver_Source.zip

Two boot procedures are described below, one for Uboot and one

for CCS.

1) Uboot Steps:

Ensure EVM configuration

switches are set as shown for

NOR SPI Boot.

Connect the USB mini-B

cable to J1

Insert pendrive and load USB

For Windows User:

For Linux User:

COM drive by executing the

program\drivers\

CP210xVCPInstaller_x86

program\drivers\

Please download driver from any of below link as per Linux kernel version on PC.

Compile the driver and install it.

For 64-bit systems execute the

http://www.silabs.com/Support%20Documents/Software/Linux_2.6.x_VCP_Driver_Source.zip

Open Tera Term,

select COM port, configure

settings, as shown in image.

This serial port settings of

Tera Term is shown as an

example. It is not mandatory

to use only Tera Term as

a serial terminal

Insert DC-in cable to apply

12V power.

Hit any key to stop

On SoC serial port console

a display will be seen,

as shown in image.

auto-boot when prompted.

EVM is now ready for

Uboot applications.

MCSDK Downlink Page:

http://software-dl.ti.com/sdoemb/sdoemb_public_sw/mcsdk/latest/index_FDS.html

2) CCS Steps:

Update or install CCS

(V5.5.0.00077 or later) from

MCSDK download page.

Ensure EVM configuration

switch are set as shown for

No Boot/JTAG DSP Little

Endian Boot mode.

Connect the USB mini-B

cable to XDS200.

Insert DCInsert DC--in cable to applyin cable to apply

12V power.12V power.

LaunchLaunch CCSCCS.. After CCS isAfter CCS is

opened,opened, EVM is now reaEVM is now readydy

for use.for use.

Getting Started:

Please see the ‘Getting Started’ chapter in the

MCSDK User Guide for hardware and

software setup:

http://processors.wiki.ti.com/index.php/MCSDK_

User_Guide_for_KeyStone_II.

Important Notes when handling the EVM:

Plug in all the cables before powering

ON the EVM to ensure proper

grounding.

Do not unnecessarily flex the boards,

while inserting cables. Excessive

flexing can break the PCB traces.

Use proper ESD procedures when

handling the EVM.

Warning: Some components on the

EVM may be too hot to touch with your

bare hand when power is on.

Online Documentation

TI device product page

http://www.ti.com/product/66ak2e05

Multicore SDK

http://www.ti.com/tool/bioslinuxmcsdk

http://processors.wiki.ti.com/index.php/M

CSDK_User_Guide_for_KeyStone_II

CCS v5

http://processors.wiki.ti.com/index.php/Categ

ory:Code_Composer _Studio_v5

C663X EVM Information:

https://www.einfochips.com/tI-66ak2e-evm

This link contains:

Hardware & Software details

User Guide

Technical Reference Manual

EVMK2E EVM Support:

Please write to tievmsupport@einfochips.com

for technical queries related to this EVM.

eInfochips Address :

eInfochips Limited.

303,Parishram Building,5/B Rashmi Society

Mithakhali Six Road,Navarangpura.

Ahmedabad- 380009.

Gujarat, INDIA.

Tel : +91-79-2656 3705.

Fax :+91-79-2656 0722.

http://www.einfochips.com/

TI Worldwide Technical Support

Internet

TI Semiconductor Product Information Center Home Page

support.ti.com

TI Semiconductor KnowledgeBase Home page

support.ti.com/sc/knowledgebase

Product Information Centers

Americas

Phone +1(972) 644-5580 Fax +1(972)927-6377

Internet/Email support.ti.com/sc/pic/americas.htm

Europe, Middle East and Africa

Phone

European Free Call 00800-ASK-TEXAS

(00800 275 83927)

International +49 (0) 8161 80 2121

Russian Support +7 495 981 0701

Note: The European Free Call (Toll Free) number is not active in

all countries. If you have technical difficulty calling the free call

number, please use the international number above.

Fax +(49) (0) 8161 80 2045

Internet support.ti.com/sc/pic/euro.htm

Japan

Fax

International +81-3-3344-5317

Domestic 0120-81-0036

Internet/Email

International support.ti.com/sc/pic/japan.htm

Domestic www.tij.co.jp/pic

Asia

Phone

International +91-80-413816651-

Domestic Toll-Free-Number Toll-Free-Number

Australia 800-999-084 Malaysia 1-800-80-3973

China 800-820-8682 New Zealand 0800-446-934

Hong Kong 800-96-5941 Philippines 1-800-765-7404

India 1-800-425-7888 Singapore 800-886-1028

Indonesia 001-803-8861-1006 Taiwan 0800-006800

Korea 080-551-2804 Thailand 001-800-886-0010

Fax +886-2-2378-6808 Email [email protected]

[email protected]

Internet support.ti.com/sc/pic/asia.htm

Important Notice: The products and services of Texas

Instruments Incorporated and its subsidiaries described herein

are sold subject to TI's standard terms and conditions of sale.

Customers are advised to obtain the most current and complete

information about TI products and services before placing

orders. TI assumes no liability for applications assistance,

customer's applications or product designs, software

performance, or infringement of patents. The publication of

information regarding any other company's products or services

does not constitute TI's approval, warranty or endorsement

thereof.

The floating bar is a trademark of Texas Instruments.

All other trademarks are the property of their respective owners

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Texas Instruments:

XEVMK2EX EVMK2EX

Table of contents

Other Texas Instruments Control Unit manuals

Texas Instruments

Texas Instruments CC256xEM User manual

Texas Instruments

Texas Instruments TMCS1101EVM User manual

Texas Instruments

Texas Instruments TPS7B8401EVM User manual

Texas Instruments

Texas Instruments XIO2001 User manual

Texas Instruments

Texas Instruments TA 5 1 Q15B5EVM-K Series User manual

Texas Instruments

Texas Instruments AWR1642 User manual

Texas Instruments

Texas Instruments CC3000 User manual

Texas Instruments

Texas Instruments DRV601EVM User manual

Texas Instruments

Texas Instruments TAS6424R-Q1 User manual

Texas Instruments

Texas Instruments LM48580 User manual

Texas Instruments

Texas Instruments NA210-214EVM User manual

Texas Instruments

Texas Instruments LP8863EVM User manual

Texas Instruments

Texas Instruments TDC7200EVM User manual

Texas Instruments

Texas Instruments LMK05318EVM User manual

Texas Instruments

Texas Instruments DRV10987 EVM User manual

Texas Instruments

Texas Instruments TCA5405EVM User manual

Texas Instruments

Texas Instruments TPS2559EVM-624 User manual

Texas Instruments

Texas Instruments TMS320C6748 User manual

Texas Instruments

Texas Instruments ADC1173 User manual

Texas Instruments

Texas Instruments TMS320C6670 User manual

Texas Instruments

Texas Instruments DP159RSB User manual

Texas Instruments

Texas Instruments DAC8811 User manual

Texas Instruments

Texas Instruments BQ25180 User manual

Texas Instruments

Texas Instruments DS90UB949A-Q1EVM User manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual