Tennsco Stackable Workbench Drawer Unit Instruction Manual

ASSEMBLY INSTRUCTIONS & PARTS MANUAL

PK-1420719

Stackable Workbench

Drawer Unit

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE

Tennsco LLC.

, Dickson, TN 37056-1888 • (866) 446-8686

GENERAL SAFETY INFORMATION

Some parts may have sharp edges. CARE must be taken when handling various pieces to avoid injury.

For safety, wear a pair of work gloves when assembling or performing any maintenance.

LIMITED WARRANTY

Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment, hereunder. This warranty shall not apply in

the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modication or repair by persons not authorized by Seller, where goods are damaged during

shipment, or where the date stamps on the goods have been defaced, modied or removed. UNLESS CONSIDERED UNENFORCEABLE OR UNLAWFUL UNDER APPLICABLE LAW:

a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY EXCLUDED:

b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT OF THE GOODS AT SELLER’S OPTION, AND SHALL IN NO

EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.

NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. Seller shall have the right to inspect any goods claimed to be defective at Buyers place of business or require Buyer to return the

goods to Seller for inspection on Seller’s premises. Transportation charges covering returned goods will be borne by Seller only if such goods are proven to be defective, are covered by this warranty

and are returned within the warranty period stated above.

ASSEMBLY OF STACKABLE WORKBENCH DRAWER

Two people are recommended for assembly. Approximate assembly time: 20-25 minutes.

Tools required: slotted screwdriver, Phillips screwdriver, and 7/16”wrench or nut driver.

The reference numbers used throughout this sheet refer to the illustration on the back cover.

This is to help you to identify the various parts as they are mentioned.

4. Insert the drawer into the housing.

1. Remove the drawer (Ref. No. 1) from the housing (Ref. No. 2)

by rst pulling it to the full extent that the suspensions allow.

Once the drawer is fully open, move the plastic lever inside

the suspension member (Ref. No. 7) to release the suspension

sections.

NOTE: On one side of the

suspension you will need to

move the lever up; on the

opposite side, you will need

to move the lever down.

NOTE: One set of mounting brackets comes with the standard

steel top workbench. Additional sets of mounting brackets must

be purchased separately if attaching more than one drawer or

attaching a drawer to a modular workbench.

Assembly for Steel Top

2. Attach the two mounting brackets (Ref. No. 3) in the desired

location on the workbench top. It is most common to place the

drawer to either the far left or far right side of the bench, but

can be placed anywhere that there are two holes in the bench

top that are 15” apart. Secure with two 1/4”-20 x 5/8” bolts

(Ref. No. 9) per mounting bracket.

3. Attach the drawer housing to the mounting brackets. Secure

with four 1/4”-20 x 5/8” bolts.

⁭

Assembly for Wood Top

2. Using the housing as a template, mark the location of four

holes for wood screws onto the underside of the wood top.

The recommendation is 1/2” offset from front of the bench top.

Using a 5/32” drill bit, drill holes into the wood top, drilling

about

1/2” to 3/4” deep.

3. Secure the housing to the top, using four #14-3/4” hex head

slotted wood screws (Ref. No. 11).

4. Insert the drawer into the housing.

2. Bolt housing together with four 1/4”-20 bolts and nuts.

3. Insert the drawer into the housing.

Assembly for Drawer to Drawer

1. Remove the drawer from the housing by rst pulling it to the

full extent that the

suspensions allow.

Once the drawer is

fully open, move the

plastic lever

inside the

suspension

member to

release the

suspension

sections.

NOTE: On one side of the

suspension you will need to

move the lever up; on the

opposite side, you will need

to move the lever down.

⁭

1. Remove the drawer from the housing by rst pulling it to

the full extent that the suspensions allow. Once the drawer

is fully open, move the plastic lever inside the suspension

member to release the suspension sections.

NOTE: On one side of the

suspension you will need to

move the lever up; on the

opposite side, you will need

to move the lever down.

⁭

REPLACEMENT PARTS

REF. NO. DESCRIPTION PART NUMBERS

QTY.

1 Drawer

2 Drawer Housing

3 30” Mounting Bracket OR

36” Mounting Bracket

976CDW

976CDH

WBMC-30

WBMC-36

967T

WBDD-125D

SUSP-16

CL-1

8 1/4”-20 x 5/8” Bolt

9 1/4”-20 Nut

10 #14 x 3/4”Hex Head Slotted Wood Screw

4 Tray

5 Divider

6 Drawer Suspension

7 Cam Lock w/Keys

**Available Locally

⁭

1/4”-20 x 5/8” Bolt

(Ref No. 8)

1/4”-20 Nut

(Ref No. 9)

Drawer Housing

(Ref No 2)

Drawer (Ref No 1)

Mounting Brackets

(Ref No 3)

⁭

Tray (Ref No 4)

⁭

Divider

(Ref No 5)

⁭

Drawer Suspension

(Ref No 6)

⁭

Drawer

Suspension

(Ref No 6)

⁭

Cam Lock with Keys

(Ref No 7)

#14 x 1/4” Hex Head

Slotted Wood Screw

(Ref No. 10)

NOTE: Additional hardware may be included for replacement purposes.

Tennsco makes every effort to ensure that all units ship complete with all parts and arrive undamaged.

However, should your unit contain missing or damaged parts, please contact your purchase location.

49B142

Other Tennsco Indoor Furnishing manuals

Tennsco

Tennsco 1472 Instruction Manual

Tennsco

Tennsco zt7 Series User manual

Tennsco

Tennsco B-6000 Instruction Manual

Tennsco

Tennsco WELDED 3-PERSON LOCKER Instruction Manual

Tennsco

Tennsco Z-Line Steel Shelf Unit Instruction Manual

Tennsco

Tennsco 3070 Instruction Manual

Tennsco

Tennsco 1872 Instruction Manual

Tennsco

Tennsco 1472 Instruction Manual

Tennsco

Tennsco ZA7-4824S-4D Instruction Manual

Tennsco

Tennsco 1870 User manual

Tennsco

Tennsco L&T Hinged Door Kit Instruction Manual

Tennsco

Tennsco EB-12 Instruction Manual

Tennsco

Tennsco Capstone Shelving Units Instruction Manual

Tennsco

Tennsco Jumbo Storage Cabinet J1878SU Instruction Manual

Tennsco

Tennsco STK-151872-1 Instruction Manual

Tennsco

Tennsco MB-2-2542 Instruction Manual

Tennsco

Tennsco 7218 Instruction Manual

Tennsco

Tennsco B-3000 Instruction Manual

Tennsco

Tennsco B-8400 User manual

Tennsco

Tennsco SINGLE TIER Instruction Manual

Tennsco

Tennsco Imperial Shelving 3630 Instruction Manual

Tennsco

Tennsco 1471 Instruction Manual

Tennsco

Tennsco 1842 User manual

Tennsco

Tennsco J2478C Instruction Manual

Popular Indoor Furnishing manuals by other brands

Homelegance

Homelegance California 1662PEK-1CK Assembly instruction

Osmond Ergonomics

Osmond Ergonomics FLO instructions

OVE

OVE ELOISE 42 installation manual

overstock

overstock MF286255 Assembly instructions

Sonoma

Sonoma 160-801 Assembly instructions

BOLERO

BOLERO Wicker Side Chair CF158 Care Instructions

Coaster

Coaster 4799N Assembly instructions

Stor-It-All

Stor-It-All WS39MP Assembly/installation instructions

Lexicon

Lexicon 194840161868 Assembly instruction

Next AMELIA NEW 462947 Assembly instructions

Furinno

Furinno 18089 Assembly instruction

Munchkin

Munchkin Push to Close MK0001 manual

impekk

impekk Manual II Assembly And Instructions

Elements

Elements Ember Nightstand CEB700NSE Assembly instructions

JWA

JWA CARY 68429 Assembly instruction

VIPACK

VIPACK AMORI AMKB9014 Assembly instructions

Anthro

Anthro GT03 Series Assembly instructions

Rowico

Rowico SANNA Assembly instructions