Teltonika RUT500 User manual

1. To enter router’s Web interface type http://192.168.1.1 in your internet browser.

2. Use the following parameters when prompted for authentication:

User name: admin

Password: admin01

3. Configuration Wizard will start after logging in. It is necessary to complete Configuration

Wizard to setup router to correct mode. You can leave default settings but it is strongly

recommended that you change the password and enable Wireless Security.

4. Go to Status -> Network Information and pay attention to Signal Strength. To maximize

the performance try adjusting antennas or changing location of your device to achieve

best signal conditions.

This sign on the package means that

it is necessary to read the User’s

Manual before you start using the

device.

This sign on the package means

that all used electronic and electric

equipment should not be mixed

with general household waste.

Please visit our web site www.teltonika.lt for complete user manual

RUT500

HSPA+ Router

Quick start guide v1.7

2 3

Front Panel Back Panel

1Power socket

1GSM main antenna connector

2,3,4 LAN Ethernet ports

2Wi-Fi antenna connector

5WAN Ethernet port

3GSM auxiliary antenna connector *

6Power LED

4Reset button

7,8,9 LAN LEDs

5GSM LED

10 WAN LED

*- Unavailable in alternate model.

Hardware installation

1. Remove back panel and insert SIM card which was given by your ISP (Internet Service

Provider). Correct SIM card orientation is shown in the picture.

2. Attach GSM main and Wi-Fi antennas.

3. Connect the power adapter to the socket on the front panel of the device. Then plug

the other end of the power adapter into a wall outlet or power strip.

4. Connect to the device wirelessly (SSID: Teltonika) or use Ethernet cable and plug it

into any LAN Ethernet port.

Configure your computer

1. Enable the wireless network connection. (Go to Start > Control Panel > Network and

Internet > Network and Sharing Center. In the left pane click Change adapter settings

link. Right click on Wireless Network Connection and select Enable.

2. Setup wireless network adapter on your

computer (Right click on Wireless Network

Connection select, choose Internet

Protocol Version 4 (TCP/IP) and click

Properties)

3. Select Obtain IP address automatically

and Obtain DNS server address

automatically if they are not selected.

Click OK.

4. Right click on Wireless Network

Connection and select

Connect/Disconnect to see available

wireless networks.

5. Choose the wireless network Teltonika from the list and press Connect.

Other manuals for RUT500

Table of contents

Other Teltonika Network Router manuals

Teltonika

Teltonika RUT951 User manual

Teltonika

Teltonika RUT240 User manual

Teltonika

Teltonika RUT950 LTE User manual

Teltonika

Teltonika RUT850 User manual

Teltonika

Teltonika RUT950 LTE User manual

Teltonika

Teltonika QSG RUT951 User manual

Teltonika

Teltonika RUT900 User manual

Teltonika

Teltonika RUTX09 User manual

Teltonika

Teltonika FMx 640 User manual

Teltonika

Teltonika FMB002 User manual

Teltonika

Teltonika RUT9 Series User manual

Teltonika

Teltonika RUT500 User manual

Teltonika

Teltonika RUT240 User manual

Teltonika

Teltonika RUT240 User manual

Teltonika

Teltonika RUTX08 User manual

Teltonika

Teltonika RUT200 User manual

Teltonika

Teltonika RUT955 User manual

Teltonika

Teltonika RUT955 User manual

Teltonika

Teltonika RUT900 User manual

Teltonika

Teltonika RUTX08 User manual

Teltonika

Teltonika QSG RUTM50 User manual

Teltonika

Teltonika TMT250 User manual

Teltonika

Teltonika RUT523 User manual

Teltonika

Teltonika RUT850 User manual

Popular Network Router manuals by other brands

Allnet

Allnet ALL0333AU user guide

HomeSeer

HomeSeer HT-SEL Getting started guide

Sercomm

Sercomm Genesis OC3505D Quick installation guide

Billion

Billion BIPAC 5102 Series user manual

TP-Link

TP-Link TD-8817 QIG

Motorola

Motorola MR1900 user guide

Digi

Digi IX14 user guide

Cisco

Cisco NCS 540 Hardware installation guide

XAVi

XAVi X8821e user manual

BEC

BEC 6200WZL Quick installation guide

MikroTik

MikroTik hAP ac3 Series quick start

Korenix

Korenix JetNet 5428G Series user manual

NETGEAR

NETGEAR FS526T - Switch installation guide

Korenix

Korenix JetNet 5710G Series user manual

Automated Logic

Automated Logic ZN551 Technical instructions

Cisco

Cisco ASR 1000 Series Installation and configuration guide

EnGenius

EnGenius ESR-9710 quick start guide

Cisco

Cisco 805 Series Product overview