Teltonika FMx 640 User manual

Table of contents

Other Teltonika Network Router manuals

Teltonika

Teltonika TMT250 Installation and user guide

Teltonika

Teltonika RUT950 User manual

Teltonika

Teltonika FM36M1 User manual

Teltonika

Teltonika FM3622 User manual

Teltonika

Teltonika RUT230 User manual

Teltonika

Teltonika QSG RUTM50 User manual

Teltonika

Teltonika RUTX08 User manual

Teltonika

Teltonika RUT500 User manual

Teltonika

Teltonika RUT200 User manual

Teltonika

Teltonika RUTX08 User manual

Teltonika

Teltonika RUT850 User manual

Teltonika

Teltonika RUT950 LTE User manual

Teltonika

Teltonika RUT523 User manual

Teltonika

Teltonika TRB145 User manual

Teltonika

Teltonika RUT500 User manual

Teltonika

Teltonika WiMAX User manual

Teltonika

Teltonika RUT723 User manual

Teltonika

Teltonika RUT230 User manual

Teltonika

Teltonika RUT241 User manual

Teltonika

Teltonika RUT200 User manual

Teltonika

Teltonika RUT950-V2 User manual

Teltonika

Teltonika RUT905 User manual

Teltonika

Teltonika TMT250 User manual

Teltonika

Teltonika RUT950 LTE User manual

Popular Network Router manuals by other brands

Allnet

Allnet ALL0333AU user guide

HomeSeer

HomeSeer HT-SEL Getting started guide

Sercomm

Sercomm Genesis OC3505D Quick installation guide

Billion

Billion BIPAC 5102 Series user manual

TP-Link

TP-Link TD-8817 QIG

Motorola

Motorola MR1900 user guide

Digi

Digi IX14 user guide

Cisco

Cisco NCS 540 Hardware installation guide

XAVi

XAVi X8821e user manual

BEC

BEC 6200WZL Quick installation guide

MikroTik

MikroTik hAP ac3 Series quick start

Korenix

Korenix JetNet 5428G Series user manual

NETGEAR

NETGEAR FS526T - Switch installation guide

Korenix

Korenix JetNet 5710G Series user manual

Automated Logic

Automated Logic ZN551 Technical instructions

Cisco

Cisco ASR 1000 Series Installation and configuration guide

EnGenius

EnGenius ESR-9710 quick start guide

Cisco

Cisco 805 Series Product overview

https://wiki.teltonika-gps.com/view/Teltonika_FMx_640_With_TCP_Link_Mode

Teltonika FMx 640 With TCP Link Mode

Main Page > EOL Products > FMB640 > FMB640 Manual > Teltonika FMx 640 With TCP Link Mode

Contents

1 Introduction: Understanding what is FMB640 RS232/RS485 TCP Link mode:

2 Step 1. Connect the FMx640 to the RS232 on COM1:

3 Step 2. FMx640 Configuration:

3.1 Message Timestamp

4 Step 3. Establishing FMx test link with server through Hercules and sending messages with

Hercule:

5 Step 4. Receiving messages with Hercules:

6 The Conclusion:

6.1 Links for download

Introduction: Understanding what is FMB640 RS232/RS485 TCP Link mode:

In this mode link with external device (for example PC) using text messages can be established. FMx

has to be connected to the external device through RS 232 on COM1/COM2 port of FMx. Any string

of data coming to COM port will be routed to server (if link is currently active). Messages that are

exchanged between FMx device and server, have to be packed in Codec.12 format. Here for TCP link

establishment, we will use Hercules. For sending messages from FMx to server Terminal will be

used.

Step 1. Connect the FMx640 to the RS232 on COM1:

Step 2. FMx640 Configuration:

The FMx configurator you have to set parameters for COM1 or COM2 (depends on which COM port

you are using) in global parameters window. You have to modify the server sittings to your PC IP and

your TCP port.

· Modify the Mode from silent to TCP/UDP Ascii mode.

· Make sure that the Baud rate is matching with the baud rate in the terminal, in our example it

is the sensor

Note: Try to make sure that your TCP Port is open by checking it with any port checker websites.

Message Timestamp

Message Timestamp parameter is used to determine if it is necessary to include a timestamp in the

RS232 TCP packet when sending it to the server. If the parameter is Enabled, then Codec 13 is used

for data sending. Otherwise, Codec 12 is used.

You can also use RS485 which is also suitable for Ascii TCP Link mode. In order to make a link

between FMx640 device and server, Domain and Target Server Port have to be set in the working

device profile, GPRS data sending Settings section. When the right parameters are set, you can save

the configuration to the FMx640 device.

Step 3. Establishing FMx test link with server through Hercules and sending

messages with Hercule:

In this case we have a PC that is considered to be a server and an external device at the same time.

When FMx is configured and connected to the external device, next that we have to do is to start

Hercules which is in server side and will be used for sending and receiving messages.

Here you have to send acknowledgement after receiving the IMEI from the device. then You have to

send 01 as a server response.

Sending messages with Hercules

You have to choose TCP Server section from the upper menu. In the marked fields.

Step 4. Receiving messages with Hercules:

In this step we need to use the terminal log. When you want to send a message from FMx 640 to the

server, write it in Terminal but change your com port and select port which is assigned for

COM1/COM2.

Terminal Log Sending Text

After doing the mentioned configuration you can type your message in the marked field, check +CR

and press Send button. If sent successfully, you will see it in Hercules Received data field.

Receiving Text from The Terminal to Server Hercules

The Conclusion:

In this mode link with an external device for example PC using text messages can be established. We

can apply this scenario on FMx640 or FMx125 which have to be connected to the external device

through RS232 or RS485. Any string of data coming to device via RS232 or RS485 will be routed to

the server (if the link is currently active). Messages that are exchanged between FMx device and

server, have to be packed in Codec.12 format and will receive to the Hercules receiver successfully.

Links for download

1. Hercules SETUP utility

2. Terminal download