Symmons 4200TRMTC Installation instructions

Oxford®

Model Numbers

Oxford Trim Series

Oxford Trim Series with TA-10 Flow Control Spindle & T-12A Cap Assembly

Installation & Operation Instructions

TRIM ONLY

4200-TRM

Shower Valve Trim

4201-TRM

Shower Trim

4202-TRM

Tub/Shower Trim

4203-TRM

Hand Shower Trim

4205-TRM

Shower/Hand Shower Trim

4206-TRM

Tub/Shower/Hand Shower Trim

Compliance

• ASME A112.18.1/CSA B125.1

Limited Lifetime - to the original end purchaser in consumer/residential installations.

5 Years - for industrial/commercial installations.

Refer to www.symmons.com/warranty for complete warranty information.

Go to www.symmons.com/register to register your Symmons product.

TRIM, TA-10, T-12A

4200TRMTC

Shower Valve Trim

4201TRMTC

Shower Trim

4202TRMTC

Tub/Shower Trim

4203TRMTC

Hand Shower Trim

4205TRMTC

Shower/Hand Shower Trim

4206TRMTC

Tub/Shower/Hand Shower Trim

Warranty

4200-TRM

4200TRMTC

4201-TRM

4201TRMTC

4202-TRM

4202TRMTC

4205-TRM

4205TRMTC

4203-TRM

4203TRMTC

4206-TRM

4206TRMTC

TA-10T-12A

1. Recommended Tools

FIGURE 2

Floor

Notes:

1) Valve body and piping not included and shown as reference only.

2) Plaster shield (p/n T-176) for dry wall, plaster or other type walls 1/2" or greater.

3) All dimensions measured from nominal rough-in (see R as reference).

4) Dimensions subject to change without notice.

Phillips Screwdriver

Adjustable Wrench Safety Glasses Thread Seal TapeDrill

Allen Wrench (3mm)

FIGURE 1

2. Dimensions

Measurements

A 6-1/2", 165 mm

B 9-5/8", 245 mm

C 3-7/8", 98 mm

Male 1/2" IPS thread must

protrude 1/2" from

ﬁnished wall

E 6", 152 mm right or left

F 77", 1956

G 5", 127 mm

H 7-1/2", 191 mm

I 7", 178 mm

J 4-3/4", 121 mm

K 2-1/2", 64 mm

4200, 4201, 4203, 4205:

Ref. 42", 1067 mm

4202, 4206:

Ref. 32", 813 mm

M 12", 305 mm

N 2-9/16", 65 mm

O 4", 102 mm

P 1/2" NPT

Q 4", 102 mm

R(Rough in)

2" ± 1/4", 51 mm ± 6 mm

S 6-1/2", 165 mm

3. Parts Breakdown (Model Numbers Ending in TRMTC)

5. Installation - Adjust Packing Nut (Model Numbers Ending in TRMTC)

1) Turn hot and cold supplies on. Valve will not operate unless both hot and cold water supply pressures are on.

2) Place handle over ﬂow control spindle.

3) Tighten packing nut for positive frictional resistance as handle is rotated from shut-o position across adjustment range.

6. Installation - Setting Limit Stop Screw (Model Numbers Ending in TRMTC)

1) Turn hot and cold supplies on. Valve will not operate unless both hot and cold water supply pressures are on.

2) Place handle on ﬂow control spindle and open valve to maximum desired temperature.

3) Turn limit stop screw clockwise until it seats.

WARNING: Failure to adjust limit stop screw properly may result in serious scalding.

The temperature limit stop screw limits valve handle from being turned to maximum position resulting in excessive hot

water discharge temperatures.

4. Installation - Remove Test Cap (Model Numbers Ending in TRMTC)

1) Check for leaks around the valve assembly and all pipe

ﬁttings.

Flow control spindle (TA-10) and cap assembly (T-12A) will

come factory assembled for all model numbers ending in

TRMTC. When ready to remove Test Cap and install trim,

follow the instructions below:

2) Remove test cap from valve (FIGURE 4.1).

3) If system is dirty, ﬂush valve.

4) Thread ﬂow control spindle and cap assembly into valve

body. Turn clockwise to secure to valve (FIGURE 4.2).

FIGURE 4.1 FIGURE 4.2

LIMIT STOP

SCREW

PACKING

NUT

FIGURE 3

Replacement Parts

Item Description Part Number

1 Cap Assy. T-12A

2 Flow Control Spindle TA-10

IMPORTANT: Model numbers ending in TRMTC

coordinate with Temptrol pressure balancing valves

ordered with Test Cap. The Test Cap is used to

allow pressurization of system. Do not remove

test cap from valve during wall construction,

installation of valve or pressurization of system.

WARNINGS:

1. Do not expose valve with test cap to heat

for longer than 2 minutes when soldering

copper tubing. Doing so may damage the

internal components of the valve and will

void the product warranty.

2. Ensure test cap is tightened securely after

soldering valve body.

Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■Phone: (800) 796-6667 ■ Fax: (800) 961-9621

WARNING: This product can expose you to chemicals including lead, which is known to the state of California to cause cancer, birth

defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Replacement Parts

Item Description Part Number

A Showerhead 422SH

B Shower Arm 422SA

Diverter Handle

Flange T-549-DIV

Shower Handle

Flange T-549

Lock Nut

Dome Cover T-543

Diverter Escutcheon

Screws

Mounting Plate

LD-132-NS

Dial

Screws

Mounting Plate

T-542-NS-K001

M Hand Shower 422W

N Wall Cradle T-547

O 60" Hose RTS-045

Tub Spout

Diverter Tub Spout

422TS

422TSD

Notes:

1) Append appropriate sux for premium ﬁnish.

2) Append appropriate ﬂow rate to showerhead

or hand shower for low ﬂow.

3) Apply a bead of silicone around the perimeter

of all shower trim installed ﬂush to the

ﬁnished wall. Leave opening on bottom of

escutcheons for weep hole.

4) Apply plumber tape to all threaded

connections.

FIGURE 7

EF-109*

*Order in-line vacuum breaker (EF-109) for

hand shower systems without dual checks.

7. Parts Breakdown

This manual suits for next models

Table of contents

Other Symmons Plumbing Product manuals

Symmons

Symmons SLW-8602-1.5 User manual

Symmons

Symmons Origins S-9600-P-TRM Installation instructions

Symmons

Symmons SPP-3510 User manual

Symmons

Symmons Symmetrix S-250 Series Quick guide

Symmons

Symmons Ballina Trim Series Manual

Symmons

Symmons Carrington SRT-4470 Quick guide

Symmons

Symmons Sereno 4300-TRM Installation instructions

Symmons

Symmons Vella S-2610 Series Quick guide

Symmons

Symmons Degas SLW-5412 Quick guide

Symmons

Symmons Ultra-Sense S-6080-ACM Operation manual

Symmons

Symmons Canterbury SRT-4570 Quick guide

Symmons

Symmons Canterbury Trim Series Installation instructions

Symmons

Symmons Identity SLS-6710-1.0 Manual

Symmons

Symmons Winslet Series Manual

Symmons

Symmons 0142-01-L/HD-TRM User manual

Symmons

Symmons Dia SLC-3512-1.5 Manual

Symmons

Symmons Unity S-6600 Manual

Symmons

Symmons TEMPTROL II Operation manual

Symmons

Symmons Duro 361SH Manual

Symmons

Symmons Origins SK248 Series Manual

Symmons

Symmons Safetymix 1-400 series User manual

Symmons

Symmons Symmetrix S240 Manual

Symmons

Symmons 2DIV-BODY Manual

Symmons

Symmons Origins Trim Series Installation instructions

Popular Plumbing Product manuals by other brands

Weka

Weka 506.2020.00E ASSEMBLY, USER AND MAINTENANCE INSTRUCTIONS

Kohler

Kohler K-6228 Installation and care guide

UBERHAUS DESIGN

UBERHAUS DESIGN 75175017 Operator's manual

American Standard

American Standard DetectLink 6072121 manual

Uponor

Uponor Contec TS Mounting instructions

Pfister

Pfister Selia 49-SL Quick installation guide

Fortis

Fortis VITRINA 6068700 quick start guide

Fortis

Fortis MILANO 78211JS installation instructions

Kohler

Kohler K-12183 Homeowner's guide

Maxxus

Maxxus MX-M206-01 instruction manual

Moen

Moen 5922 Series installation instructions

Viega

Viega Prevista Pure 8512 Instructions for use

Kohler

Kohler Centerset K-15240 Homeowner's guide

Viega

Viega Prevista Dry 8522.33 Instructions for use

Sanela

Sanela Lema SLP 59RB Instructions for use

Elkay

Elkay EDF15AC Installation, care & use manual

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Instructions for use/assembly instructions

baliv

baliv WT-140 manual