Symmons 2DIVBODYSRT Manual

Model Numbers

Dual Outlet Diverter

Operation & Maintenance Manual

2DIVBODYSRT

Dual outlet diverter valve features shared functionality.

Inlet and outlet connections are both 1/2" male IPS & 1/2"

female sweat. Components made from lead free metal

construction.

Speciﬁcation

Warranty

Limited Lifetime - to the original end purchaser in

consumer/residential installations.

5 Years - for industrial/commercial installations.

Refer to www.symmons.com/warranty for complete

warranty information.

Compliance

Dimensions

Notes:

1) Figure is determined by style of trim attached to shower valve. See rough-in

dimension drawing for shower valve application with diverter valve.

2) Dimensions subject to change without notice.

2DIVBODYSRT

Dual Outlet Diverter

-ASME A112.18.1/CSA B125.1

Measurements

A 2-5/8", 67 mm

Screwless Escutcheons

Hole Size

Min. Ø 3", 76 mm

Max. Ø 3-1/4", 83 mm

Screw Escutcheons

Hole Size

Min. Ø 1-3/4", 44 mm

Max. Ø 2", 51 mm

D 5-1/4", 133 mm

E(3x) 1/2" male IPS &

(3x) 1/2" sweat

F See note 1

G 4-7/8", 124 mm

ININ

OUTOUT

Parts Breakdown

Replacement Parts

Item Description Part Number

A Cap Assembly RTS-DIVCAP-

SRT

C Cartridge Extender RTS-DIVEXT-

SRT

Cartridge

Retaining Sleeve RTS-2DIV

Spacer

1" Cap Extender

1" Cartridge Extender

4" Mounting Screws

RTS-DIV-1EXT

Tools Required

Adjustable

Wrench

Drill (optional)

Plumber Tape

Safety Glasses

Solder

Torch

FROM SHOWER VALVE

DIVERTER FUNCTION 1

DIVERTER FUNCTION 2

Important:

Cartridge (D)

must be installed

with arrow

facing down.

Installation

1) Reference rough-in dimension for

shower application with diverter

for proper installation of diverter

valve.

5) Sweat 1/2" copper tubing from

inlet port on diverter valve

to water source. Sweat 1/2"

copper tubing from outlet ports

to desired accessories.

Important: Do not plug

outlet ports. Do not use

diverter as shut-off valve.

2) Shut-off water supplies.

4) Secure stringer mounts on diverter

valve (E) to wood blocking for

support.

6) Turn on water supplies to ush

plumbing lines free of debris

Check for leaks.

3) Position diverter valve (E) so port

marked IN is facing down.

Optional: Apply plumber tape to

male IPS threads on the inlet and

outlet ports of diverter valve. Install

1/2"-14 NPT copper ttings to the

inlet and outlet ports. Connect

outlets to desired accessories.

Note: Securing stringer mounts is

necessary for applications where

PEX, or other non rigid tubing, is

used to install diverter valve.

Note: Diverter valve can be installed

in wall with shower valve or in an

adjoining wall to shower valve.

Important: Do not expose

diverter valve to heat for

longer than 2 minutes when

sweating in copper tubing.

Doing so may damage the

internal components of

the valve and will void the

product warranty.

Operation

POSITION 1

1) Cartridge is factory set to divert

to function 1.

2) Turn handle to position 2 to divert

to function 2.

3) Turn handle to position 3 to share

functions 1 and 2.

Note: Additional handle positions for same output are illustrated.

POSITION 2 1

POSITION 3

Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■Phone: (800) 796-6667 ■ Fax: (800) 961-9621

WARNING: This product can expose you to chemicals including lead, which is known to the state of California to cause cancer, birth defects, or

other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Problem Cause Solution

Diverter valve will not divert water.

Foreign matter in water supply may

cause blockages in plumbing lines and

the diverter valve cartridge.

Remove cartridge from diverter valve.

Flush lines free of foreign matter.

Inspect cartridge for debris. Replace

cartridge if necessary.

Water is leaking from the face of the

diverter valve.

Cap assembly is not fully sealed to

diverter valve.

Remove cap assembly. Inspect

threads for debris. Reinstall cap

assembly to diverter valve at

lbf-in of torque.

Diverter trim will not install to diverter

valve.

Diverter valve body rough-in is too

deep.

Use RTS-DIV-1EXT to extend diverter

stem 1 inch.

Maintenance (Cartridge Replacement)

1) Remove cap assembly (A) from

diverter valve by turning coun-

terclockwise. Remove cartridge

extender (C) and cartridge (D). For

diverter valves purchased before

November 2016, remove retaining

sleeve (F) from diverter valve.

3) Orient new cartridge (D) with

arrow facing down. Align pegs on

cartridge (D) with indents inside

diverter valve (E).

Inspect cartridge for debris.

Replace cartridge if necessary.

4) Align spindle extender (C) with

broach on cartridge (D). Install

spindle extender (C) and cap

assembly (A) to cartridge (D).

Secure cap assembly (A) by

turning clockwise.

Notes:

1) Use caution not to dislodge

cartridge from valve body when

installing cap assembly (A).

2) Tighten cap assembly (A) to

5 lbf-in of torque.

Troubleshooting Chart

Note: Spacer (B) will be seated

inside cap assembly (A).

Note: For diverter valves purchased

before November 2016, retaining

sleeve (F) must be inserted ush into

diverter valve (E) before installing

cartridge (D).

Other Symmons Plumbing Product manuals

Symmons

Symmons Unity SK6600PO Manual

Symmons

Symmons Naru 412TS Manual

Symmons

Symmons Unity S-6600-OP Manual

Symmons

Symmons Origins 9600-P Manual

Symmons

Symmons Ballina 522TS Manual

Symmons

Symmons SLW-5512-1.5 User manual

Symmons

Symmons Elm SLC5512PP Manual

Symmons

Symmons Duro SK3610PO Manual

Symmons

Symmons 3DIVBODYNSSRT Manual

Symmons

Symmons Origins SK23 Series Manual

Symmons

Symmons Dia 353SR-5 Manual

Symmons

Symmons Carrington Trim Series Manual

Symmons

Symmons Hydapipe 1-901Series User manual

Symmons

Symmons Elm SLS5512PP Manual

Symmons

Symmons Ultra-Sense S-6080 Quick guide

Symmons

Symmons Oxford SLW-4212 Quick guide

Symmons

Symmons Allura SLW-4712 Quick guide

Symmons

Symmons Sereno Trim Series Installation instructions

Symmons

Symmons Identity SLS-6710-1.0 Manual

Symmons

Symmons Carrington SRT-4470 Quick guide

Symmons

Symmons TA-10 User manual

Symmons

Symmons Origins 96-2DIV-PLR Manual

Symmons

Symmons DURO FSTF367220 Manual

Symmons

Symmons Moscato S-2620-L Quick guide

Popular Plumbing Product manuals by other brands

Weka

Weka 506.2020.00E ASSEMBLY, USER AND MAINTENANCE INSTRUCTIONS

Kohler

Kohler K-6228 Installation and care guide

UBERHAUS DESIGN

UBERHAUS DESIGN 75175017 Operator's manual

American Standard

American Standard DetectLink 6072121 manual

Uponor

Uponor Contec TS Mounting instructions

Pfister

Pfister Selia 49-SL Quick installation guide

Fortis

Fortis VITRINA 6068700 quick start guide

Fortis

Fortis MILANO 78211JS installation instructions

Kohler

Kohler K-12183 Homeowner's guide

Maxxus

Maxxus MX-M206-01 instruction manual

Moen

Moen 5922 Series installation instructions

Viega

Viega Prevista Pure 8512 Instructions for use

Kohler

Kohler Centerset K-15240 Homeowner's guide

Viega

Viega Prevista Dry 8522.33 Instructions for use

Sanela

Sanela Lema SLP 59RB Instructions for use

Elkay

Elkay EDF15AC Installation, care & use manual

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Instructions for use/assembly instructions

baliv

baliv WT-140 manual