Strong SRT 7300 CI+ User manual
Digital High Definition
Satellite Receiver SRT 7300 CI+
Picture similar
User Manual
Bedienungsanleitung
Gebruiksaanwijzing
Manuel de l'utilisateur
Manuale per l'uso
Használati utasítás
Návod k obsluze
Používateľská príručka
Fig. 1
Fig. 2
Fig. 3
Fig. 4 BA C
SCART
Fig. 5 BA C
HDMI
Fig. 6 B
A A
C
1 3
2 4
71
2 3
4 9 10
5 6 8
2
3
1
54
76
9
9
12
17
11
13 14
10
20
24
27
15
16
2118
19
23
28
25
22
2926
8
8
Fig. 1
Fig. 2
Fig. 3
Fig. 4 BA C
SCART
Fig. 5 BA C
HDMI
Fig. 6 B
A A
C
1 3
2 4
71
2 3
4 9 10
5 6 8
2
3
1
54
76
9
9
12
17
11
13 14
10
20
24
27
15
16
2118
19
23
28
25
22
2926
8
8
1
PART 1 • English
English
TABLE OF CONTENTS
1.0 INTRODUCTION 2
1.1 Safety Instructions 2
1.2 Storage 2
1.3 Equipment Set-up 3
1.4 Accessories 3
1.5 Usage of external USB devices 3
2.0 YOUR RECEIVER 3
2.1 DEFAULT PIN-CODE: 0000 3
2.2 Front Panel 3
2.3 Rear Panel 4
2.4 Remote Control Unit 4
3.0 CONNECTIONS 5
3.1 Basic connection using a Scart cable 5
3.2 Basic connection using an HDMI cable 5
3.3 Connecting multiple fixed dishes using a DiSEqC 1.0 switch 5
3.4 Connecting and using the IR extender 5
4.0 STARTING UP FOR THE FIRST TIME 6
4.1 Language selection 6
4.2 System Setup 6
4.3 Satellite Selection 7
4.4 Scan Mode 7
4.5 Signal Adjust 7
4.6 Channel Setup 7
5.0 QUICK GUIDE TO USING YOUR RECEIVER 7
6.0 OPERATION 8
6.1 Changing channels 8
6.2 Info Banner 8
6.3 Selection of audio language 8
6.4 Teletext 8
6.5 Subtitles 9
6.6 Changing the video format 9
6.7 EPG (Electronic Programme Guide) 9
6.8 Instant Recording 9
6.9 Timeshift 9
7.0 MAIN MENU 10
7.1 Installation 10
7.2 Setup 12
7.3 Channel 14
7.4 Advanced 17
7.5 Games 18
8.0 TROUBLESHOOTING 18
9.0 SPECIFICATIONS 19
STRONG declares that this item complies with the basic requirements and other relevant regulations of
directives 2004/108/EC and 73/23/EC, RoHS 2002/95/EC
Subject to alterations. In consequence of continuous research and development technical specifications,
design and appearance of products may change. HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and
other countries. ASTRA is a registered trade mark of SES ASTRA, Eutelsat and HOT BIRD are registered
trademarks of Eutelsat Communications, all other product names are trademarks or registered
trademarks of their respective owners.
26 Dec 2012 18:27
2
PART 1 • English
1.0 INTRODUCTION
1.1 Safety Instructions
DO NOT INSTALL YOUR RECEIVER:
In a closed or poorly ventilated cabinet; directly on top of or under any other equipment; on a surface
which might obstruct the ventilation slots.
DO NOT EXPOSE THE RECEIVER OR ITS ACCESSORIES:
To direct sunlight or any other equipment that generates heat; to rain or intense moisture; to
intense vibration and to any shock which may cause permanent damage to your receiver or to
any magnetic objects, such as loudspeakers, transformers, etc.
Do not use a damaged power cord. It may cause a fire or an electrical shock. Do not touch a
power cord with wet hands. It may cause an electric shock.
When the receiver is not used for a long period of time, you should unplug the power cord
from the wall socket.
Do not use alcohol or ammonia based liquids to clean the receiver. If you wish, you may clean
your receiver with a soft lint-free cloth slightly made damp with a mild soap solution, only after
disconnecting from the mains voltage supply. Make sure no foreign objects fall through the
ventilation slots because this could cause fire or an electric shock.
Do not place any objects on top of the receiver because this might prevent proper cooling of
the components inside.
SAFETY PRECAUTIONS
Never open the receiver cover. It is dangerous to touch the inside of the receiver due to high
voltage currents and possible electrical hazards and your warranty will be void. Refer all
maintenance or servicing to suitably qualified personnel.
When you are connecting cables, be sure that the receiver is disconnected from the mains
supply voltage. Wait a few seconds after switching off the receiver before you move the receiver
or disconnect any equipment.
It is a necessity that you only use an approved extension and compatible wiring that is suitable
for the electrical power consumption of the installed equipment. Please ensure that the
electrical power supply corresponds with the voltage on the electrical identification plate at the
back of the receiver.
If the receiver does not operate normally even after strictly following the instructions in this
user manual, it is recommended to consult your dealer.
1.2 Storage
Your receiver and its accessories are stored and delivered in a packaging designed to protect against
electric shocks and moisture. When unpacking it, make sure that all the parts are included and keep
the packaging away from children. For transporting the receiver from one place to another or if you are
returning it under warranty conditions, make sure to repack the receiver in its original packaging with its
accessories. Failing to comply with such packaging procedures could void your warranty.
3
PART 1 • English
English
1.3 Equipment Set-up
We recommend you consult a professional installer to set up your equipment. Otherwise, please follow
the instructions below:
Refer to the user manual of your TV and your antenna.
Make sure that the SCART cable and outdoor components are in a good condition and the SCART
connections are well shielded
This manual provides complete instructions for installing and using this receiver. The following symbols
will serve as follow.
WARNING Indicates warning information.
Tips Indicates any other additional important or helpful information.
MENU Represents a button on the remote control or the receiver (Bold Character)
Move to Represents a menu item within a window. (Italic Character)
1.4 Accessories
User’s Manual
1 Remote control unit
IR Extender
2x Batteries (AAA type)
Note: The batteries should not be recharged, disassembled, electrically short-
circuited, be mixed or used with other types of batteries.
1.5 Usage of external USB devices
It is recommended to use USB 2.0 storage devices. If your device is not compatible to USB 2.0 specifications,
recording, playback and other multimedia functions of the receiver would not work properly.
STRONG cannot guarantee compatibility to all types of USB storage devices.
It is advised not to store important information on USB storage devices used with the receiver. Always
make backups of data on your USB storage device before using it with this receiver. STRONG will not
take responsibility for any loss of information or circumstances caused by loss of information.
Please ensure that either the USB device is already formatted to FAT/FAT32, or format the USB device via
your receiver, refer to chapter 7.3.3 File Explorer for details.
2.0 YOUR RECEIVER
2.1 DEFAULT PIN-CODE: 0000
2.2 Front Panel
Fig.1
1. Standby/ON switch turns the receiver ON or to Standby
2. USB connector connect your USB device (stick, HDD, etc.) to this port
3. 4 digit LED display displays channel number or time, depending on settings.
4. CI slot Common Interface slot for your decoder module
4
PART 1 • English
2.3 Rear Panel
Fig 2.
1. SAT IN To connect to the LNB of your satellite dish for reception of satellite
broadcast signal
2. SAT OUT To loop through the satellite signal to a second receiver
3. AUDIO (L/R) To connect to the audio input of your HIFI or television
4. VIDEO (RCA) To connect to the RCA video input of your TV or VCR using an RCA cable
5. S/PDIF To connect to a digital or home cinema audio amplifier
6. TV SCART To connect to TV using a SCART cable
7. IR To connect the IR extender
8. HDMI To connect to the HDMI input of your TV using a good quality HDMI cable.
9. Power switch To switch the mains power ON or OFF
10. Power cord The receiver requires a mains voltage of 100 ~ 240 V AC 50 ~ 60Hz
(auto selecting). Please check the local power conditions before
connecting the receiver to the mains supply.
2.4 Remote Control Unit
Fig. 3.
1. q Turns the receiver ON/Standby
2. ! Mutes the audio output of the receiver
3. [0~9] Channel number and numeric value input
4. SAT Satellite selection in normal viewing and channel mode
5. TV/R Toggles between TV and Radio mode
6. MENU Displays the menu in viewing mode or to go back one step in the menu
7. EXIT Go back one step in the menu/cancellation of current process/exit
from main menu to viewing mode
8. pq Switches to the next/previous channel in viewing mode or moving the
highlight up/down in the menu
9. tu Increasing/decreasing of the volume level in viewing mode or
changing values of settings in the menu
10. OK Viewing mode: Displays the channel list. Menu: activation of the
highlighted item
11. FAV Toggles between available favourite groups and all channels list
12. EPG Viewing mode: Displays the EPG (Electronic Program Guide)
13. V+/V- Increasing/decreasing of the volume level
14. INFO Press once to display channel number/name and now/next info.
Press twice to display frequency/signal strength information.
15. AUDIO Displays the audio selection menu with selections for available
languages and audio modes
16. TEXT Displays the teletext browser
17. P+/P- Switches to next/previous channel in viewing mode
18. RED/RCL Toggles between the current channel and the previous channel in
viewing mode
5
PART 1 • English
English
19. GREEN/PAUSE Freezes/resumes the current broadcast
20. YELLOW/SUB Displays a list of available subtitling for the current channel
21. BLUE/V.F. Toggles between available HDMI screen resolutions
22. 2 Freezes/resumes the playback of recordings or music files
23. : Jumps to the previous track during MP3 playback
24. " Jumps to the next track during MP playback
25. 4 Starts recording of the current broadcast
26. 1 Starts playback of the selected file in File Explorer
27. 6 Fast forward
28. 5 Fast rewind
29. 3 Stop
3.0 CONNECTIONS
3.1 Basic connection using a Scart cable
Fig. 4.
A Connect the LNB of your satellite dish to the SAT IN connector of your receiver using a good
quality coax cable and suitable ‘F-connector’ plugs.
B Connect one end of a good quality Scart cable to the TV SCART connector on your receiver and
the other end to the SCART input of your TV.
C Plug the power cord to a suitable wall outlet.
3.2 Basic connection using an HDMI cable
Fig. 5.
A Connect the LNB of your satellite dish to the SAT IN connector of your receiver using a good
quality coax cable and suitable ‘F-connector’ plugs.
B Connect one end of a good quality HDMI cable to the HDMI output on your receiver and the
other end to the HDMI input of your TV.
C Plug the power cord to a suitable wall outlet.
3.3 Connecting multiple fixed dishes using a DiSEqC 1.0 switch
Fig. 6.
A Connect the LNB’s of your fixed dishes to the inputs of a DiSEqC 1.0 switch
B Connect the output or “to receiver” connector of the DiSEqC 1.0 switch to the SAT IN connector
on your receiver.
C Refer to section 3.1 or 3.2 for TV and mains connections.
3.4 Connecting and using the IR extender
The included IR extender allows you to place the receiver out of sight (e.g. in a closed cabinet) while
still being able to control it. Plug the IR extender into the IR connector on the back of the receiver.
Locate the extender on a position giving it direct sight to the remote control. Once a suitable location is
found, remove the protecting foil from the adhesive tape on the back of the extender and fix it by slightly
pressing it down on the surface it should be placed on.
6
PART 1 • English
4.0 STARTING UP FOR THE FIRST TIME
Ensure that your satellite signal is of good quality and that all connections are sound. In case of
difficulties or questions, please ask you local dealer for assistance. It is recommended to follow the Setup
Wizard step by step. It will guide you through the basic installation and channel searching process. You
can enjoy digital HD broadcasts within just a few minutes.
4.1 Language selection
After turning on the power for the first time, the language selection menu will appear. Choose your language
with pq and confirm with OK. A welcome screen will now be displayed. Once you are ready, press OK to
start the wizard. During any stage of the Setup Wizard, you can press EXIT to get back to the previous screen.
4.2 System Setup
Here you can set the Country, Aspect Ratio, Conversion Mode and Subtitle Language. Use pq to move
the highlight and tu to change settings. To see a list of all possible settings for the highlighted option,
press OK. Once all settings are made, move the highlight to NEXT and press OK to continue.
4.2.1 Country
When you select one of the follow Countries “Germany, Austria, Netherlands, Belgium or Italy” then the
receiver will create extra channel list functions.
If Germany or Austria is chosen as country and ASTRA 19.2E as satellite, German and Austrian pre-
installed channels are available.
Choose in NEXT step Preinstalled & Scan to install the German or Austrian pre-installed channels and
continue with the Setup Wizard as described from point 4.4 or choose Satellite Scanning to continue
without pre-installed channels.
If Netherlands or Belgium is chosen as country and ASTRA 19.2E as satellite, then operators channels
are available by Fast Scan Table (FST). This will reserve channels 1 to 999 for this channel list and Logical
Channel Numbering (LCN) will be active. Channel sorting is in this mode not possible as this will be
done automatically. If a new list is available you will get automatically an update message. Choose in
NEXT step the wanted channel list and continue with the Setup Wizard as described from point 4.4.
If Italy is chosen as country and Hot Bird 13E as satellite, then the operator channels are available by
Logical Channel Numbering (LCN) sorting. This will reserve channels 1 to 999 for this channel list and
LCN mode will be active. Channel sorting is in this mode not possible as this will be done automatically.
Choose in NEXT step TiVu sat & scan to activate LCN mode and to start a full scan and continue with the
Setup Wizard as described from point 4.4 or choose Satellite Scanning to continue without this function.
4.2.2 Aspect Ratio
Use this option to set the aspect ratio of your TV set. Available options are: {Auto}, {4:3} and {16:9}.
4.2.3 Conversion mode
Use this option to set the preferred way of converting 16:9 broadcasts to 4:3 TV format. You can choose
between the following options: {Letterbox} (the full 16:9 picture will be displayed on your 4:3 TV set with
black bars above and below the picture.), {Pan and scan} (the centre of the 16:9 picture will be displayed
full-screen on your 4:3 TV) and {Combined} (combination of Letter-box and Pan and scan).
7
PART 1 • English
English
4.2.4 Subtitles
Use this option to set the preferred subtitle language or select “off” if you do not want this option.
4.3 Satellite Selection
Use pq to highlight the satellite your dish is aimed at and press OK to confirm.
If your dish is aimed at Astra 1C, 1E, 1F, select ASTRA 19.2E. The SCAN MODE screen will appear.
If your dish is aimed at HOT BIRD, select HOTBIRD 13E.The SCAN MODE screen will appear.
If your dish is aimed at another satellite, select OTHER. You will be guided to the Satellite Settings menu.
Refer to chapter 7.1.1 for instructions.
4.4 Scan Mode
Use pq to highlight the desired option and press OK to confirm.
All: Will scan all available channels on the chosen satellite.
Free: Will scan FTA (Free-To-Air) channels only.
4.5 Signal Adjust
This screen allows you to fine tune the alignment of your dish antenna for optimum reception.
Use tu to select the switch input the dish is connected to. (If the LNB of your dish is directly connected
to the receiver, choose Switch Input 1) The bars on the bottom of the screen indicate the current signal
strength and quality. A red bar indicates a bad signal. Green bars indicate a good signal. Yellow bars
indicate that the signal condition is nearly acceptable.
Adjust your dish for maximum possible signal quality and strength. Once the signal cannot be improved
anymore, fix the dish on this position and press OK to continue.
4.6 Channel Setup
Your receiver will now perform an automatic channel search. Once the process is finished, all found
channels will be stored and the receiver will switch to the first found channel. You are now ready to enjoy
your new receiver.
Note: If no channels were found during the automatic channel scan, the receiver will
display the Satellite Settings menu. Please refer to chapter 7.1.1 for instructions.
5.0 QUICK GUIDE TO USING YOUR RECEIVER
We at STRONG understand that you can’t wait to enjoy your new HD receiver. The following quick guide
will make you familiar with the basic operation of this device. We do, however, advice you to read the full
manual to get the best performance from your STRONG HD receiver.
To turn your receiver ON or to Standby, use the q button on the remote control or the button on the left
side of the front panel.
Choose the desired channel with the pq buttons or the P+/P- buttons. Alternatively, you can digit the
channel number with the [0~9] buttons on the remote control. Or press OK in viewing mode to display
the channel list.
The volume can be adjusted with the V+/V- buttons or the tu buttons.
Other manuals for SRT 7300 CI+
1
Table of contents
Other Strong Receiver manuals
Strong
Strong SRT 5120 User manual
Strong
Strong SRT 7500 User manual
Strong
Strong SRT 8208 User manual
Strong
Strong SRT 50 User manual
Strong
Strong SRT 6202 User manual
Strong
Strong SRT 8212 User manual
Strong
Strong SRT 5390 User manual
Strong
Strong SRT 6201 User manual
Strong
Strong SRT 5434 User manual
Strong
Strong SRT 4304 User manual
Strong
Strong SRT 3000 User manual
Strong
Strong SRT 8527 User manual
Strong
Strong SRT 5016 User manual
Strong
Strong SRT 4300 User manual
Strong
Strong SRT 8221 User manual
Strong
Strong Srt Ant 10 Eco User manual
Strong
Strong SRT 2121 User manual
Strong
Strong SRT 6200 User manual
Strong
Strong SRT 4922B+ User manual
Strong
Strong SRT 7501 User manual
