Stratus V 6624 Manual

Stratus Technologies
R005S-00
Stratus ftServer V 6624
Hardware Installation Guide

Notice
The information contained in this document is subject to change without notice.
UNLESS EXPRESSLY SET FORTH IN A WRITTEN AGREEMENT SIGNED BY AN AUTHORIZED
REPRESENTATIVE OF STRATUS TECHNOLOGIES, STRATUS MAKES NO WARRANTY OR REPRESENTATION
OF ANY KIND WITH RESPECT TO THE INFORMATION CONTAINED HEREIN, INCLUDING WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A PURPOSE. Stratus Technologies assumes no responsibility or obligation
of any kind for any errors contained herein or in connection with the furnishing, performance, or use of this document.
Software described in Stratus documents (a) is the property of Stratus Technologies Bermuda, Ltd. or the third party,
(b) is furnished only under license, and (c) may be copied or used only as expressly permitted under the terms of the
license.
Stratus documentation describes all supported features of the user interfaces and the application programming
interfaces (API) developed by Stratus. Any undocumented features of these interfaces are intended solely for use by
Stratus personnel and are subject to change without warning.
This document is protected by copyright. All rights are reserved. Stratus Technologies grants you limited permission to
download and print a reasonable number of copies of this document (or any portions thereof), without change, for your
internal use only, provided you retain all copyright notices and other restrictive legends and/or notices appearing in the
copied document.
Stratus, the Stratus logo, ftServer, the ftServer logo, Continuum, StrataLINK, and StrataNET are registered trademarks
of Stratus Technologies Bermuda, Ltd.
The Stratus Technologies logo, the Continuum logo, the Stratus 24 x 7 logo, ActiveService, ftScalable, and ftMessaging
are trademarks of Stratus Technologies Bermuda, Ltd.
RSN is a trademark of Lucent Technologies, Inc.
All other trademarks are the property of their respective owners.
Manual Name: Stratus ftServer V 6624 Hardware Installation Guide
Part Number: R005S
Revision Number: 00
Software Release Number: OpenVOS Release 19.0.0
Publication Date: September 2016
Stratus Technologies, Inc.
5 Mill and Main Place, Suite 500
Maynard, Massachusetts 01754-2660
© 2016 Stratus Technologies Bermuda, Ltd. All rights reserved.

Contents iii
Contents
Preface ix
1. Unpacking and Positioning the Cabinet 1-1
Safety Considerations 1-1
Safety Notices 1-2
Required Tools 1-3
Unpacking the Cabinet 1-3
Moving the Cabinet to the Installation Site 1-6
Removing the Packing Materials 1-7
Setting Up the Pallet Ramp 1-14
Removing the Cabinet from the Pallet 1-16
Inspecting the Cabinet and System 1-17
Verifying the Stratus Serial Number 1-17
Stabilizing the System 1-18
Disposing of Shipping Materials 1-19
2. Connecting and Powering On the System 2-1
Connecting External Components to the System 2-1
Connecting the RSN Console Server and Optional Modem 2-1
Connecting the AA-E97900 RSN Console Server to
the Internet 2-2
Connecting the AA-E97900 RSN Console Server to
a Modem 2-5
Connecting the ftScalable Storage System 2-8
Connecting the PC Console 2-9
Connecting the UPS 2-12
Installing the Optional Tape-Drive Enclosures 2-13
Installing the Optional Tape-Drive Enclosure 2-14
Powering On the System 2-17
Powering On the Components 2-17
Powering On the ftServer System 2-21
Related Documentation 2-22

Contents
iv Stratus ftServer V 6624 Hardware Installation Guide (R005S)
Appendix A. Removing and Replacing a U779V Fabric Switch A-1
Removing a U779V Fabric Switch A-1
Replacing a U779V Fabric Switch A-11
Final Steps A-21
Logging In to the Fabric Switch A-21
Stopping and Restarting the storage_monitor
Daemon A-22
Additional Information A-23

Figures v
Figures
Figure 1-1. Cabinet Packaged for Shipping 1-4
Figure 1-2. Dimensions of Packaged 38U Cabinet 1-5
Figure 1-3. Clearances Required at Installation Site 1-5
Figure 1-4. Cutting Exterior Shipping Straps 1-8
Figure 1-5. Removing Packing Material 1-9
Figure 1-6. Unbuckling Interior Shipping Straps 1-10
Figure 1-7. Wooden-Restraint Blocks 1-11
Figure 1-8. Inserting Lever Bar 1-12
Figure 1-9. Tilting Cabinet 1-13
Figure 1-10. Sliding Back Wooden-Restraint Blocks 1-13
Figure 1-11. Removing Bolt 1-14
Figure 1-12. Assembling and Positioning Ramp 1-15
Figure 1-13. Attaching Transition Plates 1-16
Figure 1-14. Moving Cabinet Down Pallet Ramp 1-17
Figure 1-15. Equipment Label 1-18
Figure 2-1. AA-E97900 RSN Console Server Serial Connection 2-2
Figure 2-2. AA-E97900 RSN Console Server Connections to the
Internet 2-3
Figure 2-3. Connecting the AA-E97900 Power Cord and Cables in
an Internet Connection 2-4
Figure 2-4. AA-E97900 RSN Console Server Connections to a
Modem 2-6
Figure 2-5. Connecting the AA-E97900 RSN Console Server Cables
and Power 2-7
Figure 2-6. Connecting PC Console to COM 2 Port 2-10
Figure 2-7. Connecting PC Console to U772 Ethernet Switch B 2-11
Figure 2-8. Connecting UPS Units to U772 Ethernet Switches 2-13
Figure 2-9. Attaching the Rails to the Tape-Drive Enclosure 2-14
Figure 2-10. Inserting the Enclosure into the Cabinet 2-15
Figure 2-11. Installing the Tape-Drive Enclosure 2-16
Figure 2-12. Powering On PDUs 2-18
Figure 2-13. Power Supply Unit 2-19
Figure 2-14. AC Power Cord 2-20
Figure 2-15. Powering On Fibre Channel Tape Drive 2-21
Figure 2-16. Powering On System 2-21
Figure A-1. Removing Bezel from Fabric Switch A-2
Figure A-2. Removing Air-Flow Bracket A-3
Figure A-3. Turning Off Power A-4

Figures
vi Stratus ftServer V 6624 Hardware Installation Guide (R005S)
Figure A-4. Disconnecting Cables at Front of Fabric Switch A-6
Figure A-5. Removing Power Cords from the Fabric Switch A-7
Figure A-6. Inserting the 1U Foam Spacer A-8
Figure A-7. Removing Screws at Rear of Cabinet A-9
Figure A-8. Removing Screws at Front of Cabinet A-10
Figure A-9. Sliding Fabric Switch Out of Cabinet A-11
Figure A-10. Attaching the Side Rails A-12
Figure A-11. Inserting Fabric Switch A-13
Figure A-12. Attaching Screws at Front of Cabinet A-14
Figure A-13. Attaching Screws at Rear of Cabinet A-15
Figure A-14. Checking the Power Switches A-16
Figure A-15. Attaching Power Cords to Fabric Switch A-17
Figure A-16. Installing Air-Flow Bracket A-18
Figure A-17. Attaching Cables to Fabric Switch A-19
Figure A-18. Replacing Bezel A-20

Tables
viii Stratus ftServer V 6624 Hardware Installation Guide (R005S)

Preface ix
Preface
The Stratus ftServer V 6624 Hardware Installation Guide (R005S) documents the
hardware installation procedures for Stratus ftServer V 6624 systems.
This manual is intended for Customer Service personnel who are installing these
systems. Because the internal components of an OpenVOS ftServer system are
installed before arriving at a customer site, this manual documents only the procedures
necessary for setting up a customer system.
Revision Information
This is a new manual.
Notation Conventions
This document uses the notation conventions described in this section.
Warnings, Cautions, Notices, and Notes
Warnings, cautions, notices, and notes provide special information and have the
following meanings:
WARNING
!
A warning indicates a hazardous situation that, if not
avoided, could result in death or serious injury.
AVERTISSEMENT
!
Unavertissementindiqueunesituationdangereusequi,si
pas évitée, pourrait entraîner la mort ou des blessures
graves.
CAUTION
!
A caution indicates a hazardous situation that, if not
avoided, could result in minor or moderate injury.

Preface
xStratus ftServer V 6624 Hardware Installation Guide (R005S)
MISE EN GARDE
!
Une mise en garde indique une situation dangereuse qui,
si pas évitée, pourrait entraîner des blessures mineures
ou modérées.
NOTICE
A notice indicates information that, if not acted on, could
result in damage to a system, hardware device, program,
or data, but does not present a health or safety hazard.
NOTE
A note provides important information about the operation
of an ftServer system or related equipment or software.
Typographical Conventions
This document uses the following notation conventions.
Italics introduces or defines new terms. For example:
The master disk is the name of the member disk from which the module was
booted.
Boldface emphasizes words in text. For example:
Every module must have a copy of the module_start_up.cm file.
Monospace represents text that would appear on your terminal’s screen (such as
commands, subroutines, code fragments, and names of files and directories).
For example:
change_current_dir (master_disk)>system>doc
Monospace italic represents terms that are to be replaced by literal values. In the
following example, the user must replace the monospace-italic term with a literal
value.
list_users -module module_name
Table of contents
Other Stratus Server manuals

Stratus
Stratus ftServer 3000 Series Technical manual

Stratus
Stratus ftServer T30 Use and care manual

Stratus
Stratus ftServer V 2302 Manual

Stratus
Stratus ftServer W 2300Series Use and care manual

Stratus
Stratus ftServer V 2404 Manual

Stratus
Stratus ftServer 2500 Technical manual

Stratus
Stratus ftServer V 2302 Technical manual

Stratus
Stratus ftServer 2600 Instruction Manual

Stratus
Stratus ftServer 2510 Technical manual

Stratus
Stratus AA-E99100 Instruction Manual





















