STILLA Willow 12x8 User manual

STILLA

ASSEMBLY INSTRUCTIONS

‘Willow’ 12x8

S3061

Every part needed to construct your shed is included inside the pack; cedar

panels, doors, windows, hardware kits & roof sheeting. Please ensure you fully

unpack all the parts & check against the parts checklist before contacting

customer service about anything you believe may be missing. Thank-you!

23/10/2023

1 | P a g e

Caution

Please be careful when handling all components, some parts have sharp metal edges.

Always wear work gloves, eye protection and long sleeves when assembling or maintaining

your shed.

Tools required for assembly

•Level

•Drill (capable of driving 100mm

Batten Screw)

•Hammer

•Ladder

•10mm Drill bit

•6mm Drill bit

•Tape measure

•Phillips head drive

•Hex Head Drive (5/16’)

•Safety glasses

•Gloves

•Circular/power saw (if heavy duty

floor was chosen)

•4mm Alan key

•Batten screw drive

Before assembly

•Before proceeding with installation, we recommend viewing the Cedar Shed video at

www.stilla.com.au/installation/ or search Stilla Classic Cedar Sheds on Youtube. This doesn’t

show the installation in detail however it could give you some handy tips. Please note we

haven’t videoed the assembly of each shed however the video online is the Maple 12x6 and

will give you an overall idea on how the installation process is completed.

•Remove all parts from packages and place in a safe place close to assembly area.

•Review all instructions; continue to refer to instructions throughout assembly –step

by step.

Preparing your site

•If you are installing your shed on the Stilla heavy duty floor, this can be placed on

unlevelled surfaces and levelled up by using the 100x100 stumps provided.

23/10/2023

2 | P a g e

WILLOW 12x8 PARTS CHECKLIST

Part Code

Checked

Part Description

Qty

Cedar Clad Panel 1200x1895mm

FWP

Cedar Clad Window Panel 1080x1895mm

Cedar Shed Window Assembly (add per additional WP)

DCD

Double Colonial Door 714x1840mm

8ft Gable (2 x LHS, 2 x RHS)

Corner Post 1890x60x20mm

Cover Strip 1890x40x7mm

8ft Fascia Pack (4 pcs)

Roof Rafter 1195x70x45mm

Collar Tie

DDH

Double Door Head 1440x70x45mm

DDS

Double Door Step 1440x42x19mm

BGS

Back Gable Cover Strip 490mm

Double Door Packer 100x100x18mm

IWS

Internal Window Strip Set –2@ 770mm, 2@ 735mm (add per

additional WP)

Roof End Piece 203x70x30mm

RSB

Roof Support Block 250x70x45mm

1450mm Roof Sheet

1450mm Roof Sheet Single Pan

Sky

1450mm Skylight (option- swap with 1450 RS)

1520mm Ridge Cap

1307mm Channel

12x8 Hardware Kit

12x8 Instruction Manual

REP

Roof End Plate 1754x70x45mm

Joining Plate 1112x70x45mm

RI (option)

Roof Insulation 3600x1300mm (option)

23/10/2023

3 | P a g e

Floor Kit –Option

Floor Frame –140x38mm

Part Code

Checked

Part Description

Qty

End Plate 1242mm

Double Joist 1730mm

Single Joist 1730mm

Floor Nog 379x42x35mm

Logs 750mm

1798mm x 800mm

598mm x 800mm

1798mm x 311mm

598mm x 311mm

23/10/2023

4 | P a g e

If no floor option was purchased, go to step 2.0 (Wall Assembly)

SKIP TO BACK FOR IMAGES TO HELP WITH FLOOR INSTALL

STEP 1.0

FLOOR KIT

1.0 –FLOOR KIT (1 of 4 floor frames)

PART CODE

QTY

DESCRIPTION

End Plate 1242mm

Single Joist 1730mm

Double Joist 1730mm

100BS

100mm Batten Screw

1.0 –FLOOR FRAME (1 of 4 floor frames)

Fasten floor frame together as indicated in diagram below, using lines and predrilled holes.

Screw through EP into DJ using 3x 100BS.

Screw through EP into SJ using 2 x 100BS per join.

Ensure frame is square by measuring from corner to corner diagonally, frame will be square

when both diagonal measurements equal the same.

REPEAT THIS PROCESS FOR FASTENING 3 MORE FLOOR FRAMES.

ENSURE 42x35 side of the DJ sits at top.

23/10/2023

5 | P a g e

STEP 1.1

FLOOR FRAME INSTALLATION

The 8x12 floor frame comes in four parts. Install first floor frame in desired position at

desired height and fasten to logs once level and square, then join and fasten next frame

until all four are joined and secured to logs.

1.1 –FLOOR FRAME INSTALLATION

PART CODE

QTY

DESCRIPTION

Logs 750x100x100mm

100BS

100mm batten screws

65BS

65mm Batten Screws

200PB

200mm M12 Post Bolt

M12 Washers

1.1 –FLOOR FRAME INSTALLATION

Repeat the steps below for each floor frame, joining the floor frames together as you go in

order displayed in diagram below.

1. Lay out frame in desired position and mark holes to dig, as indicated on diagram

below (use shovel or marking paint).

2. Dig and place logs in holes (using concrete if you wish).

3. Fasten floor frame to logs at desired height, using 4x 100BS per log, ensuring frame is

level*.

4. Butt next floor frame into last installed frame and join using 6x 65BS evenly spaced

along EP or SJ.

5. Repeat process until all frames are joined.

* Fasten frame to logs when roughly level and then critique by hammering in or adding dirt

(or concrete) to corners until perfectly level at every post.

Once all frames are joined, predrill holes (using a 13mm drill bit) and bolt each log to the

floor frame in spots indicated with 200PB, using washers on both sides.

23/10/2023

6 | P a g e

STEP 1.2

FLOOR NOG INSTALLATION

1.2 –FLOOR NOG INSTALLATION

PART CODE

QTY

DESCRIPTION

Floor Nog 379x42x35mm

65HHS

65mm Hex Head Screws

1.2 –FLOOR NOG INSTALLATION

Mark out measurements shown below (centre of nog). Fasten Floor Nogs (FN) in positions

shown in diagram below using 1x 65HHS per join.

23/10/2023

7 | P a g e

STEP 1.3

FLOOR INSTALLATION

1.3 –FLOORING INSTALLATION

PART CODE

QTY

DESCRIPTION

Floor Board 1798x800mm

Floor Board 598x800mm

Floor Board 1798x311mm

Floor Board 598x311mm

50PS

116

50mm Philips Screw

1.3–FLOORING INSTALLATION

Fasten floor sheets to floor frame as shown in diagram below using 50PS.

Bring Floor sheets in 43mm on all 4 sides from the outside of the floor frame.

Note- The x marked on the floor sheets do not line up with out joists.

23/10/2023

8 | P a g e

STEP 2.0

WALL ASSEMBLY

IF ADDITIONAL WINDOW OPTION PURCHASED (WP –1200MM WINDOW PANEL), IT CAN BE

POSITIONED ANYWHERE ON THE SHED WHERE WE HAVE USED A P (1200MM WALL PANEL)

2.0 - ASSEMBLY PARTS –WALL ASSEMBLY

PART CODE

QTY

DESCRIPTION

FWP

1080mm Window Wall panel

1200mm Wall panel

65HHS

65mm Hex head screw

2.0 - ASSEMBLY –WALL ASSEMBLY

Screw through P into FWP (top, centre & bottom) using 3 x 65HHS. (Holding studs flush on

the outside) Note: Ensure tongue on VJ Cedar Cladding is facing upwards

Screw 3 x 65HHS (Top,

centre & bottom)

FWP

Cedar Strip

When screwing the four corners

together please make sure the

studs are flush on the outside

(not the inside) as per image

below.

23/10/2023

9 | P a g e

STEP 2.1

WALL ASSEMBLY

2.1 - ASSEMBLY PARTS –WALL ASSEMBLY

PART CODE

QTY

DESCRIPTION

1200mm Wall panel

65HHS

65mm Hex head screw

2.1 - ASSEMBLY –WALL ASSEMBLY

Screw through P into P (Top, centre & bottom) using 3 x 65HHS, holding studs flush on the

inside.

Screw 3 x 65HHS (Top,

centre & bottom)

Other manuals for Willow 12x8

This manual suits for next models

Table of contents

Other STILLA Garden House manuals

Popular Garden House manuals by other brands

Mercia Garden Products

Mercia Garden Products 0628LOG181-V4 manual

Lemeks

Lemeks Palmako PA120-5930-6 Assembly, installation and maintenance manual

Gartenhaus-King

Gartenhaus-King Valery manual

Rion

Rion Hobby Gardener Assembly instructions

POD

POD Camping 480 installation manual

Select

Select ISAAC E9682 Assembly manual

Mercia Garden Products

Mercia Garden Products 01DTSHPWOR1010DDOW-V4 General instructions

Palmako

Palmako Saale installation manual

Lemeks

Lemeks Palmako Kira EL16-3623 Assembly, installation and maintenance manual

Mercia Garden Products

Mercia Garden Products 0644LOG186-V4 General instructions

Palmako

Palmako Roger FR44-5953-2 installation manual

Mercia Garden Products

Mercia Garden Products 03DTSHHP1206HGD4MW-V1 General instructions

WAR-LOCK

WAR-LOCK GARDENSHED Skillion Series Assembly instructions

Pergola kits USA

Pergola kits USA PREMIUM VINYL PAVILION Assembly manual

G21

G21 Boston 882 manual

Lemeks

Lemeks Palmako Grace PM56-4529 Assembly, installation and maintenance manual

Mercia Garden Products

Mercia Garden Products 03WES0808-V1 General instructions

Shire

Shire Salcey Assembly