StarTech.com PEX2S952PW User manual

Manual Revision: 09/22/2011

For the most up-to-date information, please visit: www.startech.com

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

PEX2S952PW

2 Port RS232 PCI Express Serial Card

with Power Output

*actual product may vary from photos

Instruction Manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by

turning the equipment o and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Use of Trademarks, Registered Trademarks, and other Protected Names and

Symbols

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not

represent an endorsement of a product or service by StarTech.com, or an endorsement of the

product(s) to which this manual applies by the third-party company in question. Regardless

of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby

acknowledges that all trademarks, registered trademarks, service marks, and other protected

names and/or symbols contained in this manual and related documents are the property of

their respective holders.

Instruction Manual

Table of Contents

Introduction............................................................................................1

Packaging Contents ................................................................................................................................. 1

System Requirements.............................................................................................................................. 1

Installation ..............................................................................................2

Jumper Conguration ............................................................................................................................. 2

Hardware Installation .............................................................................................................................. 3

Driver Installation...................................................................................................................................... 4

Verifying Installation................................................................................................................................ 5

Specications..........................................................................................6

Technical Support ..................................................................................7

Warranty Information............................................................................7

Instruction Manual

Introduction

The PEX2S952PW 2 Port PCI Express RS232 Serial Adapter Card with Power Output

turns a PCI Express slot into 2 RS-232 (DB9) serial connections and the ports provide

power output to your devices.

Suitable for many RS232 powered serial applications, and including both low and full

prole brackets, the selectable 5V or 12V power option is able to output using pin 1,

4, 8 or 9, allowing you to congure the card to suit the requirements of your powered

RS232 devices.

The PCI express serial card is based on a native single chip design, that allows you

to harness the full capability of PCI Express (PCIe) - providing optimum reliability

and speed while reducing the load applied to the CPU by as much as 48% over

conventional (bridge chip) serial cards.

Packaging Contents

• 1 x 2 Port PCI Express Serial Card

• 1 x DB9 Breakout Cable

• 1 x Low Prole Bracket

• 1 x Driver CD

• 1 x Instruction Manual

System Requirements

• PCI Express enabled computer system with available PCI Express slot

• Available LP4 Molex power connector

• Microsoft® Windows® 2000/ XP/ Server 2003/ Vista/ Server 2008 R2/ 7 (32/64-bit), or

Windows CE 5.0, or Linux® kernel 2.4.x/2.6.x

Instruction Manual

Installation

WARNING! PCI Express cards, like all computer equipment, can be severely

damaged by static electricity. Be sure that you are properly grounded before

opening your computer case or touching your PCI Express card. StarTech.com

recommends that you wear an anti-static strap when installing any computer

component. If an anti-static strap is unavailable, discharge yourself of any

static electricity build-up by touching a large grounded metal surface (such

as the computer case) for several seconds. Also be careful to handle the PCI

Express card by its edges and not the gold connectors.

Jumper Conguration

J4 JP9 Jumper

LP4 Molex

connector

Each serial port can be congured to output 5V or 12V power on pins 1, 4, 8, 9

depending on the jumper conguration or use the standard RS232 pin signals.

Serial Port 1

Pin Normal 5V 12V

1J1 J1 J9 J1 J9

4J3 J3 J9 J3 J9

Instruction Manual

8J2 J2 J9 J2 J9

9J4 J4 J9 J4 J9

Serial Port 2

Pin Normal 5V 12V

1J5 J5 J9 J5 J9

4J7 J7 J9 J7 J9

8J6 J6 J9 J6 J9

9J8 J8 J9 J8 J9

Hardware Installation

1. Turn your computer o and any peripherals connected to the computer (i.e. Printers,

external hard drives, etc.). Unplug the power cable from the rear of the power

supply on the back of the computer and disconnect all peripheral devices.

2. Remove the cover from the computer case. See documentation for your computer

system for details.

3. Locate an open PCI Express slot and remove the metal cover plate on the rear of the

computer case (Refer to documentation for your computer system for details.). Note

that this card will work in PCI Express slots of additional lanes (i.e. x4, x8 or x16 slots).

4. Gently insert the card into the open PCI Express slot and fasten the bracket to the

rear of the case.

NOTE: If installing the card into a small form factor/low prole system, replacing the

pre-installed full prole bracket with the included low prole installation bracket may

be necessary.

Instruction Manual

5. Connect an LP4 Molex power connector from the computer power supply, to the

power connector on the card.

6. Place the cover back onto the computer case.

7. Connect the DB9 breakout cable to the external 44-pin connector on the card.

8. Insert the power cable into the socket on the power supply and reconnect all other

connectors removed in Step 1.

Driver Installation

Windows 2000/XP/Server 2003

1. Upon starting Windows, if the “Found New Hardware” wizard appears on the screen,

cancel/close the window and insert the included Driver CD into the computer’s CD/

DVD drive.

2. AutoPlay should automatically launch and display all of the folders on the CD. If not,

open “My Computer” and double-click on the CD/DVD drive.

3. Enter the folder “PCIe”, then “OXPCIe952” and double-click the le “Setup.exe”.

4. This should launch the driver Installation wizard. Continue through the wizard

and once complete, all the necessary drivers will be installed.

Windows Vista/7/Server 2008 R2

1. Upon starting Windows, if the “Found New Hardware” wizard appears on the screen,

cancel/close the window or choose not to install the drivers and insert the included

Driver CD into the computer’s CD/DVD drive.

2. AutoPlay should automatically launch and display all of the folders on the CD. If not,

open “Computer” and double-click on the CD/DVD.

3. Enter the folder “PCIe”, then “OXPCIe952” and double-click the le “Setup.exe”.

4. This should launch the driver Installation wizard. Continue through the wizard and

once complete, all the necessary drivers will be installed.

Instruction Manual

Verifying Installation

Windows 2000/XP/Server 2003/Vista/Server 2008 R2/7

From the main desktop, right-click on “My Computer” (“Computer” in Vista/7), then

select Manage. In the new Computer Management window, select Device Manager

from the left window panel.

Double-click on the “Ports (COM & LPT)” option. Two additional COM ports should be

listed. The serial ports will be assigned a COM port number based upon the available

ports in Windows. This can be changed through the Properties window for each port.

*screenshots are for reference only

Instruction Manual

Specications

Host Interface PCI Express v1.1

(x1 slot connector)

Form Factor Standard Prole

Chipset ID PLX OXPCIe952

Connectors 2 x 9-pin DB9 male

1 x LP4 Molex male

Serial Protocol RS-232

Output Voltage 5V / 12V

Surge Protection ±15KV ESD on all signal pins

Maximum Data Transfer Rate 920 Kbps

Data Bits 4, 5, 6, 7, 8

Parity None, Odd, Even, Space, Mark

Stop Bits 1,1.5,2

Flow Control None, Xon/Xo, RTS/CTS

Operating Temperature 0°C ~ 50°C (32°F ~ 122°F)

Storage Temperature -20°C ~ 60°C (4°F ~ 140°F)

Humidity 5% ~ 85% RH

Dimensions 67.0mm x 20.0mm x 120.0mm

Weight 90g

Compatible Operating Systems

Windows 2000/ XP/ Server 2003/ Vista/

Server 2008 R2/ 7 (32/64-bit),

Windows CE 5.0, Linux kernel 2.4.x/2.6.x

Instruction Manual

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to

provide industry-leading solutions. If you ever need help with your product, visit

www.startech.com/support and access our comprehensive selection of online tools,

documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a lifetime warranty.

In addition, StarTech.com warrants its products against defects in materials

and workmanship for the periods noted, following the initial date of purchase.

During this period, the products may be returned for repair, or replacement with

equivalent products at our discretion. The warranty covers parts and labor costs only.

StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their

ocers, directors, employees or agents) for any damages (whether direct or indirect,

special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business,

or any pecuniary loss, arising out of or related to the use of the product exceed the

actual price paid for the product. Some states do not allow the exclusion or limitation

of incidental or consequential damages. If such laws apply, the limitations or exclusions

contained in this statement may not apply to you.

Table of contents

Other StarTech.com PCI Card manuals

StarTech.com

StarTech.com PEXUSB321C User manual

StarTech.com

StarTech.com PR22GI-NETWORK-CARD User manual

StarTech.com

StarTech.com 8STPEX2S953LP User manual

StarTech.com

StarTech.com PEXUSB3S23 User manual

StarTech.com

StarTech.com PEX1S553 User manual

StarTech.com

StarTech.com PCI2USB User manual

StarTech.com

StarTech.com PEX1P User manual

StarTech.com

StarTech.com PEXUSB312C3 User manual

StarTech.com

StarTech.com PEXUSB3S22 User manual

StarTech.com

StarTech.com PEX1S1P950 User manual

StarTech.com

StarTech.com PCI2S650PW User manual

StarTech.com

StarTech.com PEXUSB3S2EI User manual

StarTech.com

StarTech.com USB2HDCAPM User manual

StarTech.com

StarTech.com ST1000BTPEX User manual

StarTech.com

StarTech.com PEXESAT322I User manual

StarTech.com

StarTech.com 21050-PC-SERIAL-CARD User manual

StarTech.com

StarTech.com PCI2S4851050 User manual

StarTech.com

StarTech.com PCI2S950 User manual

StarTech.com

StarTech.com 8STPEXUSB3S44V User manual

StarTech.com

StarTech.com PEXHDCAP4K User manual

StarTech.com

StarTech.com PEX4S950 User manual

StarTech.com

StarTech.com PCI1PECPDV User manual

StarTech.com

StarTech.com PCISCSI2 User manual

StarTech.com

StarTech.com PEXUSB400 User manual

Popular PCI Card manuals by other brands

ERMA

ERMA SSI 1417 instruction manual

SIIG

SIIG CyberSerial Dual PCI Software installation

Moxa Technologies

Moxa Technologies CP-102E Quick installation guide

I-Bus

I-Bus IBC2602 user guide

Exsys

Exsys EX-60102 manual

Chelsio Communications

Chelsio Communications T5 Series Installation and user guide

Conrad Electronic

Conrad Electronic 97 46 71 operating instructions

Micro Innovations

Micro Innovations USB650A Quick installation guide

KTI Networks

KTI Networks KF-310 user guide

Asus

Asus SpaceLink WL230 user manual

SIIG

SIIG SC2475 Quick installation guide

TRENDnet

TRENDnet TEW-703PI Quick installation guide

Belkin

Belkin F5D7000F user manual

Pericom

Pericom PI7C7100 manual

ADLINK Technology

ADLINK Technology cPCI-3548 user manual

Digium

Digium TE200 Series user manual

Allo.com

Allo.com 2nd Gen E1/T1/J1 Quick installation guide

Western Digital

Western Digital FireWire PCI Adapter installation guide