StarTech.com USB32HDE User manual

Manual Revision: 09/20/2011

For the most up-to-date information, please visit: www.startech.com

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

USB32HDE

USB32VGAE

USB 3.0 to HDMI® External Multi Monitor Adapter

USB 3.0 to VGA External Multi Monitor Adapter

*actual product may vary from photos

Please ensure that the latest

drivers from the StarTech.com

website are installed before

plugging in the USB 3.0 Video

Adapter

Instruction Manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by

turning the equipment o and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Use of Trademarks, Registered Trademarks, and other Protected Names and

Symbols

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not

represent an endorsement of a product or service by StarTech.com, or an endorsement of the

product(s) to which this manual applies by the third-party company in question. Regardless

of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby

acknowledges that all trademarks, registered trademarks, service marks, and other protected

names and/or symbols contained in this manual and related documents are the property of

their respective holders.

Instruction Manual

Table of Contents

Introduction............................................................................................1

Packaging Contents ................................................................................................................................. 1

System Requirements.............................................................................................................................. 1

Installation ..............................................................................................2

Driver Installation (Windows) ............................................................................................................... 2

Multiple USB Video Adapter Installation .......................................................................................... 3

Verifying Installation................................................................................................................................ 3

Supported Resolutions .........................................................................4

Conguring the USB Video Adapter....................................................5

Windows 7 ................................................................................................................................................... 5

Identify Monitors....................................................................................................................................... 5

Multi-Display Control Panel................................................................................................................... 6

Display Settings ......................................................................................................................................... 6

Specications..........................................................................................7

Technical Support ..................................................................................8

Warranty Information............................................................................8

Instruction Manual

Introduction

The USB 3.0 to External Video Card Multi Monitor Adapter turns an available USB 3.0

port into an HDMI or VGA output, with high resolution video support.

Leveraging the high-bandwidth (5 Gbps) SuperSpeed USB 3.0 interface, this external

graphics card provides smooth, high-denition content to your external display,

including Blu-Ray quality video.

The USB 3.0 to External Video Adapter can be used to mirror your primary desktop,

showing the same image on each display, or to extend your desktop to double your

workspace and increase productivity. A cost-saving multi-monitor or dual display

solution for laptop and desktop applications, letting you connect an additional display

to a computer without the hassle of opening the case to install a new video card, and

oering backwards compatibility with USB 2.0 ports for added versatility.

Packaging Contents

• 1 x USB 3.0 Video Adapter

• 1 x HDMI to DVI-D Adapter (USB32HDE only)

• 1 x Driver CD

• 1 x Instruction Manual

System Requirements

• USB enabled computer system with available USB port (USB 3.0 recommended)

• HDMI or DVI enabled display device (e.g. monitor, projector, HTDV, etc)

VGA enabled display device (e.g. monitor, projector, HTDV, etc)

• 1~2 Video Adapter:

CPU: Intel® Core™ i3 2.8 GHz or equivalent (i5 recommended for HD video)

RAM: 2 GB or more (4 GB recommended for HD video)

• 3~4 Video Adapters:

CPU: Intel® Core™ i5 Quad Core 2.8 GHz or equivalent

RAM: 4 GB or more

• 5 Video Adapters:

CPU: Intel® Core™ i7 Quad Core 3.0 GHz or equivalent

RAM: 8 GB or more

• Microsoft® Windows® 7 (32/64-bit)

Instruction Manual

Installation

Please ensure that the driver installation is complete prior to the physical

installation (plugging in) of the USB 3.0 Video Adapter

Driver Installation (Windows 7)

1. Download the latest drivers from the StarTech.com website (recommended), or

insert the included Driver CD into your CD/DVD-ROM drive.

2. Locate the Setup.exe application. This le will be located in the root directory of the

Driver CD (e.g. D:\) or downloaded le.

3. Executing the Setup.exe application will

launch the following screen. Please click

on Next:

*Ensure that the USB Video Adapter is

not connected to the host computer.

4. Once the Windows has nished the driver installation, it will prompt you to restart

the computer. Select “Yes, I want to restart my computer now”, and click the “Finish”

button.

5. While the computer is restarting, connect the video cable from the secondary

monitor/display to the adapter.

USB32HDE: If connecting a DVI monitor, use the included HDMI to DVI adapter.

Turn the monitor/display on.

6. Once Windows has fully loaded, plug the USB Video Adapter into an available USB

3.0 port of your PC or Notebook.

7. Windows will automatically install the drivers. Wait until a message appears

conrming the successful installation.

8. The USB Video Adapter is now ready for use.

*screenshots/photos are for reference only

Instruction Manual

Multiple USB Video Adapter Installation

Ensure you have the latest version of the drivers installed, otherwise, please download

them from the StarTech.com website (www.startech.com).

1. Complete the standard driver installation steps, up to when you plug in the rst USB

Video Adapter.

2. Connect another monitor/display to the second USB Video Adapter, then turn on

the display.

3. Connect the USB type A connector on the second USB Video Adapter to an available

USB 3.0 port on the host computer. The driver installation will begin automatically.

Repeat these steps for each additional USB Video Adapter you wish to install. Once all

USB Video Adapters are installed, reboot the computer. After rebooting, you may be

prompted to reboot one nal time; please do so.

Verifying Installation

From the main desktop, right-click on “My Computer” (“Computer” in 7 ), then select

Manage. In the new Computer Management window, select Device Manager from the

left window panel.

Double-click the Universal Serial Bus Controllers category and the USB adapter should

be visible.

Instruction Manual

UBS32HDE: An audio device will also be listed under the“Sound, video and game

controllers” category in Device Manager. As Windows will only support one audio

output at a time, this will override the default sound card on the computer (if any),

resulting in no audio from the computer speakers. Audio will only output over HDMI.

If you wish audio to output from the computer speakers instead of HDMI, then you

must manually change the default audio device from the“Hardware and Sound”

settings in the Control Panel.

Supported Resolutions

Resolution Color Depth

1920 x 1200 @ 60Hz 16, 32 bit

1920 x 1080 @ 60Hz 16, 32 bit

1680 x 1050 @ 60Hz 16, 32 bit

1600 x 900 @ 60Hz 16, 32 bit

1440 x 900 @ 60Hz 16, 32 bit

1360 x 768 @ 60Hz 16, 32 bit

1280 x 800 @ 60Hz 16, 32 bit

1280 x 768 @ 60Hz 16, 32 bit

1280 x 720 @ 60Hz 16, 32 bit

Resolution Color Depth

1600 x 1200 @ 60Hz 16, 32 bit

1400 x 1050 @ 60Hz 16, 32 bit

1280 x 1024 @ 60Hz 16, 32 bit

1280 x 960 @ 60Hz 16, 32 bit

1152 x 864 @ 60Hz 16, 32 bit

1024 x 768 @ 60Hz 16, 32 bit

800 x 600 @ 60Hz 16, 32 bit

Instruction Manual

Conguring the USB Video Adapter

Look for the USB Video Adapter icon ( ) on your Windows System Tray (next to

clock). Right-click this icon to access the variety of functions associated to the adapter.

Windows 7

The USB Video Adapter drivers allow for all adjustments through the built-in Display

Settings window. These settings can be accessed by right-clicking on the Windows

Desktop and selecting “Screen Resolution”or by right-clicking on the USB Video

Adapter icon in the system tray and selecting “Display Settings”.

Select the physical display you wish to change the settings on, from the “Display” drop

down menu. Display Modes, resolution and rotation can be changed from this screen.

Identify Monitors

Easy display identication via an overlay will be shown in the upper right corner of all

attached display devices.

Instruction Manual

Multi-Display Control Panel

A unique feature to allow quicker and simpler management of a multi-display

environment. A series of hotkeys to quickly move the active program window to the

desired display (either on-board or each USB Video Adapter).

The default setting of the hotkeys can be found in the Hotkey List of “Multi-Display

Control Panel”.

For example: Ctrl + 2 means: to move the window to Display 2

Display Settings

Quick access to the Windows“Display Settings” window.

Instruction Manual

Specications

USB32HDE USB32VGAE

Video Signal HDMI 1.2 VGA (RGBHV)

Host Interface USB 3.0

Connectors

1 x HDMI type A

female

1 x USB 3.0 type A

male

1 x DE-15 VGA female

1 x USB 3.0 type A

male

LEDs N/A

Audio Support 2-channel LPCM

(48KHz) No

Maximum Video Resolution 1920 x 1200 2048 x 1152

Onboard Memory 16MB

Maximum Number of Adapters 5

Operating Temperature 0°C ~ 55°C (32°F ~ 131°F)

Storage Temperature -10°C ~ 75°C (14°F ~ 167°F)

Humidity < 85% RH (non-condensing)

Enclosure Material Plastic

Built-in Cable Length 160.0mm

Dimensions (LxWxH) 78.0mm x 43.5mm x

15.5mm

78.0mm x 43.5mm x

15.5mm

Weight 300g 300g

Compatible Operating Systems Windows 7 (32/64-bit)

This manual suits for next models

Table of contents

Other StarTech.com Adapter manuals

StarTech.com

StarTech.com LENOMDPGBK System manual

StarTech.com

StarTech.com EC4S952 User manual

StarTech.com

StarTech.com WCH1C User manual

StarTech.com

StarTech.com S2510U33USM User manual

StarTech.com

StarTech.com USB2VGAPRO2 User manual

StarTech.com

StarTech.com PEXM2SAT32N1 User manual

StarTech.com

StarTech.com ST1000SPEXDP User manual

StarTech.com

StarTech.com USB21000S User manual

StarTech.com

StarTech.com 102B-USBC-MULTIPORT User manual

StarTech.com

StarTech.com USB31GEHD User manual

StarTech.com

StarTech.com DKT31CHVL User manual

StarTech.com

StarTech.com USB32DP24K60 User manual

StarTech.com

StarTech.com TBT3TBTADAP User manual

StarTech.com

StarTech.com FCREADMICRO3 User manual

StarTech.com

StarTech.com SAT32MSATM User manual

StarTech.com

StarTech.com PEX300WN2X2 User manual

StarTech.com

StarTech.com USB32HD2 User manual

StarTech.com

StarTech.com DKT30CHD User manual

StarTech.com

StarTech.com USBBT2EDR4 User manual

StarTech.com

StarTech.com 120B-USBC-MULTIPORT User manual

StarTech.com

StarTech.com 8STNOTECONS02X User manual

StarTech.com

StarTech.com USB2105S User manual

StarTech.com

StarTech.com USBBT1EDR4 User manual

StarTech.com

StarTech.com USB31CSAT3CB User manual

Popular Adapter manuals by other brands

PCB Piezotronics

PCB Piezotronics 090B274 Installation and operating manual

Auvidea

Auvidea J20 Technical reference manual

Gossen MetraWatt

Gossen MetraWatt AT3-III E operating instructions

Akribis

Akribis ITF-21-BISS-MIT user manual

Tenda

Tenda W54U user guide

ROHO

ROHO AGILITY Operation manual

PROLiNK

PROLiNK WN2001 Quick installation guide

Hawking

Hawking HUF2 Specifications

Airlink101

Airlink101 AWLC4030 user manual

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter user manual

Philips

Philips SWA4554S/10 user manual

JVC

JVC TS-C9D2B Assembly and installation instructions

NETGEAR

NETGEAR A6100 quick start

D-Link

D-Link DWA-121 Quick install guide

Philips

Philips SWA2037 Specifications

Basalte

Basalte 0610-20 installation manual

Yealink

Yealink EHS40 user guide

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A installation guide