stageClix JACK 5.8 User manual
User manual
JACK 5.8
English
Version 4.0 06/2016
ii
A word of thanks
Thank you for choosing stageClix! This unit has been de-
signed with the professional musician in mind.
All units are made with only the best-quality components and
are produced using RoHS-compliant materials. This means
they do not contain any harmful substances, like lead or
mercury. In stageClix, we have developed a highly effective
system that can be used for your favourite instruments or
headset/mics.
If you have any questions, please e-mail them to us at
suppor[email protected]
If you like your stageClix product, please like us on
Facebook and on Instagram.
Safety
Do not open; no user-serviceable parts inside
Warranty void when opened.
Do not use phantom power.
Unit is not waterproof; keep away from water and other liquids.
The maximum operating temperature of this unit is 550C.
Keep away from electric heaters and ames.
Clean using a damp cloth.
Do not use cleaning agents or solvents.
1. What’s in the box?
2. Using stageClix for the rst time
3. Controlling the receiver
4. Changing channels
5. Other settings
6. Controlling the transmitter
7. Signal quality
8. Technical details
9. Warranty
10. Conformities
1
2
3
5
6
7
8
9
10
11
Contents
iii
1. What’s in the box?
Transmitter
Power adapter Patch cable 5.8 Ghz antenna
Receiver
1
2. Using stageClix for the rst time
1. Attach the antenna to the back of the receiver by turning
the nut clockwise.
(Do not use tools, and do not over-tighten)
2. Plug the supplied mains adapter into a 110-230V power
supply, and the DC plug into the rear-panel DC socket. Only
use the stageClix power supply.
3. Use the supplied patch cable to connect the rear-panel
output jack to your amplier input or to the input of your
effects unit.
4. Plug the transmitter into the front socket marked ‘charge’
and leave the transmitter to charge for some time,
preferably more than one hour.
2
3
3. Controling the receiver
back/cancel button
control knob
Receiver controls
Display items
active channel
signal strength
go to settings
battery status
settings info
VU meter
You can change settings on the receiver by using the control
knob. Rotate to change, and push to conrm your action. You
can go back or cancel at any time by pressing the back/cancel
button.
To enter changes, start by pressing the control knob once.
This will highlight the channel number, and a short help text will
be displayed.
Rotate the button to choose between the highlighted settings
icon and the highlighted channel number.
Press the button again to change the highlighted item.
The highlighted item will automatically revert to the non-high-
lighted state after a few seconds. You can also press the back
button to achieve this.
highlighted channel highlighted settings
4
4. Channels
If you are going to be using more than one stageClix unit
simultaneously in the same venue, you will need to be able
to switch between channels. To do this, follow the procedure
below, which will also help you resolve any compatibility/
interference issues with other equipment:
Leave the transmitter plugged into the receiver to keep it
synchronized with the receiver while changing channels.
When the transmitter is not plugged in, you can automati-
cally synchronize it by plugging it into the receiver.
Press the control knob to activate channels.
Press the control knob again to change channels.
Rotate the control knob to choose another channel.
Press the control knob to conrm selection of this channel.
5
6
5. Other settings
In the settings menu, you can change the following:
Brightness - Adjust the brightness of the display during
normal operation. (When the receiver is used, the display
will switch to full brightness.)
Invert display - Choose between a white and a black
background.
Active RFI - Active RFI reduces interference with guitar
electronics or piezo pickups.
Press the control knob to activate channels; rotate
to select settings.
Press the control knob to enter the settings menu.
Rotate the control knob to choose between items.
Press the control knob to change a highlighted item.
7
The transmitter can be switched on and off using
the button.
When you unplug the transmitter from the receiver, it will
automatically switch off. To reactivate the transmitter,
press the button.
Plug the transmitter into the receiver to charge it and
synchronize the channel settings.
6. Controlling the transmitter
transmitter button
Table of contents
Other stageClix Receiver manuals
