Speakman SB-1004 User manual

INSTRUCTIONS FOR MODELS

92-SB-1004-R4

For additional assistance or service please contact:

SPEAKMAN®Company

400 Anchor Mill Road

New Castle, DE 19720

800-537-2107

customerser[email protected]

www.speakman.com

SB-1004

SB-1004-E

HELPFUL TOOLS & SUPPLIES:

TOOLS AND SUPPLIES

Phillips

Screwdriver

Adjustable

Wrench

Aerator

Wrench

(Included)

10mm

Wrench

Safety

Glasses

Plumber’s

Putty

Additional warranty information can be found at:

www.speakman.com

WARRANTY

MAINTENANCE

Cover your drain to prevent loss of parts. Be sure to

wear eye protection while cutting pipe.

SAFETY TIPS

IMPORTANT

• Be sure to read instructions thoroughly before

beginning installation.

• Do not over-tighten any connections or damage

may occur.

• This faucet has an operating range of 20-80 psi.

Your new Speakman Product is designed for years of

trouble-free performance. Keep it looking new by

cleaning it periodically with a soft cloth. The use of harsh

chemicals and abrasives may damage the finish and

void the product warranty. Please be sure to only use

approved cleaners. Please contact Speakman for any

clarification of acceptable cleaners.

1Verify that the Vertical Extension (1) and Base

Flange (2) are secured tightly to the Faucet Body.

2Insert Lift Rod thru hole at rear of Faucet.

3Thread Mounting Studs into base of Faucet.

Tighten with Phillips Screwdriver.

4Place Rubber Gasket over Hoses and align to

base of Faucet.

5Place Hoses, one at a time, thru hole in

mounting surface. Lower Faucet into position.

6From below, install Rubber Washer (1), Metal

Washer (2), and secure with Mounting Nuts (3).

Align Faucet to desired position and wrench

tighten Mounting Nuts (3).

7Make connections to water supplies. The inlet

threads of the faucet are 9/16”-24 UNF and will

accept a 3/8” Compression Fitting. Wrench

Tighten.

Accepts a 3/8”

Compression

Fitting

SUPPLY STOPS NOT INCLUDED

8Remove Stopper (1), Flange Nut (2), and Flange

Washer (3) from Drain Assembly.

9From beneath, insert Drain Assembly thru drain

hole in sink. Attach supplied Flange Washer (1)

or plumber’s putty to the underside of the Flange

(2). Secure Flange (2) to the Drain Assembly.

Align the Drain Assembly as shown below.

Align towards faucet.

10 From beneath, secure Rubber Washer (1), Plastic

Washer (2), and Mounting Nut (3). Wrench

tighten.

11 Remove Pivot Nut (1), from Drain Assembly.

Install Outer Pivot Washer (2), and Pivot Rod (3).

Ensure that Inner Pivot Washer (4) is retained in

Drain Assembly. Insert Pivot Rod into Drain

Assembly and install Stopper (6) as non-remov-

able. Secure Pivot Rod to Drain Assembly by

tightening Pivot Nut (1).

12 Place one end of Spring Clip (1), on Pivot Rod

(2). Insert Pivot Rod (2) thru a hole in the Lift Rod

Strap (3). Secure with Spring Clip (1).

13 Place Drain into the open position by pressing

downward on the Pivot Rod (1). Insert Lift Rod

(2) into Strap (3). Adjust height of Lift Rod (2),

and tighten Thumb Screw (4).

14 Turn on water supplies. Activate faucet and flush

both HOT and COLD water for 1 minute.

15 Turn OFF faucet and install Aerator with

supplied Aerator Wrench.

SB-1004 REPAIR PARTS

ITEM NO. PART NO. DESCRIPTION

RPG05-0986 CARTRIDGE AND RETAINING NUT

RPG05-0989 1.5 GPM VANDAL RESISTANT AERATOR ASSEMBLY

RPG04-0442 LEVER HANDLE, SCREW, AND INDEX

RPG05-0985 MOUNTING HARDWARE GROUP

RPG63-0099 24” LONG HOSES (2)

RPG05-40005 1.2 GPM VANDAL RESISTANT AERATOR ASSEMBLY

157mm

231mm

12 3

324mm

45mm

55mm

35mm

MAXIMUM DECK

THICKNESS

32mm

MINIMUM

HOLE DIAMETER

3/8 COMPRESSION FITTINGS

(9/16-24 THREAD)

SB-1004 ROUGH-IN DIAGRAM

ALL DIMENSIONS ARE IN INCHES (MILLIMETERS) UNLESS

OTHERWISE SPECIFIED. DIMENSIONS SUBJECT TO

CHANGE WITHOUT NOTICE.

This manual suits for next models

Other Speakman Plumbing Product manuals

Speakman

Speakman EYESAVER SEF-1800-FP User manual

Speakman

Speakman S-5141-LD User manual

Speakman

Speakman SA-2203 User manual

Speakman

Speakman CPV-T2 User manual

Speakman

Speakman SENTINELPRO SLV-5450 Guide

Speakman

Speakman CPT-24000 User manual

Speakman

Speakman RPG05-109305 User manual

Speakman

Speakman CPT-25001 User manual

Speakman

Speakman EYESAVER SE-570 Guide

Speakman

Speakman VS-2054 User manual

Speakman

Speakman SENTINEL MARK II ROYALE SHOWERPAC S-1590 User manual

Speakman

Speakman SV-4012 User manual

Speakman

Speakman CPT-27400 User manual

Speakman

Speakman Symmons CPT-1000-UNI User manual

Speakman

Speakman GRAVITYFLO SE-4320 User manual

Speakman

Speakman SB-2141 User manual

Speakman

Speakman NEO SM-1010 Guide

Speakman

Speakman SENTINELPRO COMBINATION SLV-5420 Guide

Speakman

Speakman CPT-1000-P User manual

Speakman

Speakman SM-Regency Series User manual

Speakman

Speakman SF-9102 User manual

Speakman

Speakman SB-1041 User manual

Speakman

Speakman S-3470 User manual

Speakman

Speakman Speakman SFS-8000 User manual

Popular Plumbing Product manuals by other brands

Weka

Weka 506.2020.00E ASSEMBLY, USER AND MAINTENANCE INSTRUCTIONS

Kohler

Kohler K-6228 Installation and care guide

UBERHAUS DESIGN

UBERHAUS DESIGN 75175017 Operator's manual

American Standard

American Standard DetectLink 6072121 manual

Uponor

Uponor Contec TS Mounting instructions

Pfister

Pfister Selia 49-SL Quick installation guide

Fortis

Fortis VITRINA 6068700 quick start guide

Fortis

Fortis MILANO 78211JS installation instructions

Kohler

Kohler K-12183 Homeowner's guide

Maxxus

Maxxus MX-M206-01 instruction manual

Moen

Moen 5922 Series installation instructions

Viega

Viega Prevista Pure 8512 Instructions for use

Kohler

Kohler Centerset K-15240 Homeowner's guide

Viega

Viega Prevista Dry 8522.33 Instructions for use

Sanela

Sanela Lema SLP 59RB Instructions for use

Elkay

Elkay EDF15AC Installation, care & use manual

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Instructions for use/assembly instructions

baliv

baliv WT-140 manual