Sony STR-DA5800ES User manual

4-433-536-21(1)

1Installing speakers

2Connecting the speakers

STR-DA5800ES

Quick Setup Guide

This Quick Setup Guide describes how to connect speakers, a

subwoofer, a monitor, and a Blu-ray Disc Player so that you can enjoy

multi-channel surround sound. Refer to the operating instructions

supplied with the receiver for details.

Installing speakers

Connecting the speakers

Connecting the monitor

Connecting a Blu-ray Disc Player

Connect all power cords last

Turning on the receiver

Setting up the receiver

The illustration on the left shows an example of a 9.1 channel speaker system using 9 speakers (front, front high, surround, surround back,

and center speakers) and one subwoofer. The illustration on the right shows an example of a 7.1 channel speaker system using 7 speakers

(front, surround, surround back, and center speakers) and one subwoofer.

10 mm



Front left speaker



Front right speaker



Center speaker



Surround left speaker



Surround right speaker



Surround back left speaker



Surround back right speaker



Left high speaker



Right high speaker



Subwoofer

3Connecting the monitor

4Connecting a Blu-ray Disc Player

5Connect all power cords last

6Turning on the receiver

7Setting up the receiver

After performing steps 1 to 7, start playback on the Blu-ray Disc Player.

Notes

When you start operating the receiver, make sure to press AMP on the remote control first.

Otherwise, operations that follow may not be aimed at the receiver.

Set up the Blu-ray Disc Player so that it is able to output multi-channel audio signals. For a Sony Blu-ray Disc Player, check that “Audio (HDMI),” “DSD Output

Mode,” “Dolby Digital/DTS,” “Dolby Digital,” and “DTS” are set to “Auto,” “On,” “Bitstream,” “Dolby Digital,” and “DTS,” respectively (as of August 1, 2012).