SOMFY 1 822 097 User manual

Heat receiver RTS 1

Radio receiver

Heat receiver RTS Installation

Guide

580 mm

28,6 mm

166,5 mm

38 mm

The Heat receiver RTS is a radio receiver dedicated to control a heater,

lamp or other electrical device with a max. load of 2000 W.

Up to 12 different RTS remote controls can be recorded in the memory of

the Heat receiver RTS. The Heat receiver RTS must be installed and pro-

grammed by qualified installers for whom this instruction is intended.

Characteristics

Porduct reference number:

Main Supply:

Radio Frequency:

Protection Index:

Class 1 Product:

Operating Temp.:

Max Load:

Dimensions (mm):

Installation

Establishing, examining, starting up and elimination of errors of the plant may only be accomplished by an electrical specia-

list. Switch off all connected devices! The correct functioning of the device is ensured only when mounting installation is

conform in terms of power supply and regular maintenance.

Heat receiver RTS

Hereby, Somfy declares that this equipment is in compliance with the

essential requirements and other relevant provisions of Directive

1999/5/EC. A declaration of conformity is available at the web address

www.somfy.com Heading CE.

1 822 097

220 - 240 V ~ 50/60 Hz

433,42 MHz

IP 54

-20° C to +60° C

2000 Watt at 220-240 V/~50/60 Hz

166,5 x 38 x 28,6

3. GA Heat receiver RTS englisch.qxd 02.11.2006 9:34 Uhr Seite 1

Heat receiver RTS

In order to avoid errors when programming the Heat receiver RTS, it should be paid attention absolutely to the fact that when program-

ming a transmitter, only one receiver must be connected to the main supply. Please refer to the installation guide of the RTS remote

control to be recorded.

The Heat receiver RTS can be mounted with screws.

Recommendations of mounting for better radio reception:

- Minimum distance between the Heat receiver RTS and the floor: 1500 mm.

- Minimum distance between the Heat receiver RTS and the radio transmitter: 300 mm.

- Minimum distance between two RTS receivers: 300 mm.

- Warning: cordless radio equipment (e.g. headphones) in 433MHz can affect the functioning of the Heat receiver RTS.

Mounting2.1

Set the Heat receiver RTS in its programming mode by pressing simultaneously the UP and DOWN buttons of the remote control you

want to record.

➔The Lamp lights during 2 seconds. The Heat receiver RTS enters in programming mode for 1 minute (you can control the lamp by

pressing the UP button).

Then record the control by pressing briefly the “prog “button of the control.

➔The Lamp lights during 2 seconds.

The control is recorded in the Heat receiver RTS.

Record the first control3.1

Programming

Connecting the device2.2

green/yellow

phase

brown

neutral

blue

green/yellow

phase

brown

neutral

blue

2 s 0,5 s 2 s

3. GA Heat receiver RTS englisch.qxd 02.11.2006 9:34 Uhr Seite 2

Heat receiver RTS 3

2 s2 s 2 s 0,5 s

2 s2 s 2 s

0,5 s

5 s on/5 s off

2 min.

0,5 s

2 s

Add a new control3.2

Up to 12 RTS remote controls can be recorded in a heat receiver RTS. Set the Heat receiver RTS in its programming mode: Press for more

than 2 seconds the “prog” button of an already recorded control.

➔The lamp lights on for 2 seconds.

➔The Heat receiver enters in programming mode.

Then record the new control by pressing briefly the “prog “button of the control.

➔The lamp lights during 2 seconds.

The control is recorded in the Heat receiver RTS.

Remove a control (if at least two controls have been recorded).3.3

Reprogramming (if you have lost your unique control).3.4

To remove a control from the memory of the Heat receiver RTS, set the receiver in its programming mode: Press for more than 2 seconds

the “prog” button of a control that you do not want to remove.

➔The lamp lights on for 2 seconds.

➔The Heat receiver enters in programming mode.

Then press shortly the „prog“ button of the RTS control you wish to remove.

➔The lamp lights during 2 seconds.

The control is removed from the memory of the Heat receiver RTS.

Make a double power cut-off of the main: OFF 2 seconds ➔ON min. 5 seconds ➔OFF 2 seconds ➔ON.

➔The Lamp blinks during 2 minutes with an interval of 5 seconds.

This indicates that a new control can be recorded in the Heat receiver RTS now. Then press shortly the „prog“ button of the new control.

➔The lamp lights during 2 seconds.

The new control is recorded in the Heat receiver RTS.

2 s >5 s 2 s

3. GA Heat receiver RTS englisch.qxd 02.11.2006 9:34 Uhr Seite 3

Heat receiver RTS

5 047 296 11/06 © Somfy GmbH .Felix-Wankel-Str. 50 .72108 Rottenburg/N. .Service-Line: Tel. 0 18 05 / 25 21 31 (0,12 €/min.) .Fax: 0 18 05 / 25 21 36 (0,12 €/min.) .e-mail: service@somfy.de

... with an RTS control.

– Press briefly on the UUPPbutton of the RTS control to switch the lamp ON.

– Press briefly the STOPP/my button to switch the lamp OFF.

– Press briefly the DDOOWWNNbutton to switch the lamp OFF.

STOPP/my

DOWN

LED

Resetting the Heat receiver RTS (factory settings).3.5

Make a double power cut-off of the main: OFF 2 seconds ➔ON min. 5 seconds ➔OFF 2 seconds ➔ON.

➔The Lamp blinks during 2 minutes with an interval of 5 seconds.

This indicates that the Heat receiver RTS can be reset to factory settings now. Then press for more than 7 seconds the „prog“ button of a

remote control (new one or already recorded one).

➔The lamp lights on twice, for each time 2 seconds.

This indicates that the Heat receiver RTS has been successfully reset to factory settings.

– Check the lamp

– Check the power supply

– Check the battery of the transmitter

– Check that the transmitter has been properly recorded in the

Heat receiver RTS.

– Check for any other possible source of radio interferences.

– Just make a complete reset and start again (please refer to

Chapter 3).

Nothing works:

Lost in your programming mode:

Operating

Trouble Shooting

7 s 2 s 2 s3 s

2 s >5 s 2 s 5 s on/5 s off

2 min.

3. GA Heat receiver RTS englisch.qxd 02.11.2006 9:34 Uhr Seite 4

Table of contents

Other SOMFY Receiver manuals

SOMFY

SOMFY SO1870656 User manual

SOMFY

SOMFY IZYMO User manual

SOMFY

SOMFY Lighting receiver Assembly instructions

SOMFY

SOMFY 5013041 User manual

SOMFY

SOMFY Smoove UNO io Operating instructions

SOMFY

SOMFY 1810872 User manual

SOMFY

SOMFY Rollixo RTS User manual

SOMFY

SOMFY RTS 2kW Assembly instructions

SOMFY

SOMFY Universal Slim Receiver RTS Plug User manual

SOMFY

SOMFY EVB Assembly instructions

SOMFY

SOMFY Screen+Plug User manual

SOMFY

SOMFY SOLIRIS SO10802 User manual

SOMFY

SOMFY Heating Mod/Var Receiver RTS User manual

SOMFY

SOMFY Soliris User manual

SOMFY

SOMFY Lighting Receiver io User manual

SOMFY

SOMFY inteo LIGHTING indoor RTS User manual

SOMFY

SOMFY Power 1 X 2,5 DC RTS Receiver User manual

SOMFY

SOMFY INTEO LIGHTING outdoor RTS User manual

SOMFY

SOMFY Rollixo Optimo RTS User manual

SOMFY

SOMFY RTS 2kW User guide

SOMFY

SOMFY Lighting Slim Receiver RTS User manual

SOMFY

SOMFY INTEO EOLIS RECEIVER RTS 2 User manual

SOMFY

SOMFY PLATINE RTS User manual

SOMFY

SOMFY Rollixo Smart io User manual

Popular Receiver manuals by other brands

Garmin

Garmin GA 23 Owner's manual and reference guide

Aiphone

Aiphone PS-12F instructions

IMES

IMES TCS-01CA-PMI Original Operating Instruction

BWI Eagle

BWI Eagle AIR-EAGLE SR Product information bulletin

AMIMON

AMIMON AMN12310 WHDI datasheet

Dual

Dual DMCPA79BT Installation & owner's manual

Sound Associates

Sound Associates SA652P Operation manual

Sherwood

Sherwood NewCastle R-772 Service manual

Audio

Audio A10-RX Series user guide

AllSee

AllSee PushShare PSRV1.1 user manual

DEMAG

DEMAG DRC-DR D2 operating instructions

Teleco

Teleco TVRCL868A02 manual

Bosch

Bosch RF3222E installation instructions

Kramer

Kramer 631R user manual

Xpress

Xpress xmc10 installation guide

JVC

JVC KD-MR1BTS instruction manual

Omega Engineering

Omega Engineering UWTC-REC3 user guide

e-survey

e-survey E300 Pro user manual