SOMFY J4 io Assembly instructions
J4 io
Ref. 5068780A
Notice installateur
Installationsanleitung
Guida d’installazione
Installer Guide
EN DE FR
IT
56 © 2011 Somfy SAS. All rights reserved. 11/2011
EN
CONTENTS
1. Introduction 56
2. Safety 57
2.1. Safety and responsibility 57
2.2. Specic safety advice 57
3. Installation 58
3.1. 58 x 51 mm or 58 x 56 mm head rail,
open below 58
3.2. 58 x 56 mm head rail, open above 58
3.3. 57 x 51 mm head rail, open above 59
3.4. 78 X 67 mm head rail, open below 60
3.5. 67 X 66 mm head rail, open below 62
3.6. J4 io Plate 62
4. Wiring 63
5. Commissioning 64
5.1. Identifying setting steps already
completed 64
5.2. Pre-programming the Somfy io local
control point 64
5.3. Checking the motor's direction of rotation65
5.4. Basic settings (end limits and
angular travel) 65
5.5. Programming the rst Somfy io local
control point 66
5.6. Checking the settings 66
6. Operation 67
6.1. Standard operation 67
6.2. Operating with a Somfy sensor or
automatic function 67
7. Modifying the settings 67
7.1. Favourite position (my) 67
7.2. Adding/Deleting Somfy io control points
and io sensors 68
7.3. Modifying the end limits 68
7.4. Modifying the angular travel 69
8. Tips and recommendations 70
8.1. Questions on the J4 io? 70
8.2. Replacing a lost or broken Somfy io
control point 71
8.3. Replacing a component of the actuator71
8.4. Restoring the original conguration 71
9. Technical data 72
1. INTRODUCTION
The J4 io actuator is designed to drive the external venetian blind, types 1 & 2.
What is io-homecontrol®?
The J4 io uses io-homecontrol®, the new universal and secure wireless communica-
tion protocol, shared by the major manufacturers in the world of home automation.
io-homecontrol® enables all comfort and security equipment to intercommunicate and be
actuated via a single control point.
The exibility and perfect compatibility of the io-homecontrol® system provides support for
you as your needs evolve. You can start by automating roller shutters, external venetian
blinds and the front door, then equip the outside awnings, the gate and garage door or
garden lighting with the io-homecontrol® system.
These scalable items of equipment are still compatible with the existing system, thanks to
io-homecontrol® technology, which ensures their interoperability.
For further information please visit the website www.io-homecontrol.com..
io-homecontrol® provides advanced and secure radio technology that is easy to install.
io-homecontrol® labelled products communicate with each other, improving comfort,
security and energy savings.
www.io-homecontrol.com
57
© 2011 Somfy SAS. All rights reserved. 112011
EN
2. SAFETY
2.1. Safety and responsibility
- The motor, torque and operating time must be adjusted according to the complete installation.
- Only Somfy original accessories should be used (adapters, brackets, connectors, power cable, etc.).
- Fitting, testing, commissioning and repair of the installation must only be carried out by qualied personnel.
- Correct operation of the installation is only guaranteed if the installation and assembly have been carried out
according to best practices, if the electrical supply is adequate and if maintenance is carried out.
- The installer must also comply with the current standards and legislation in the country in which the product
is being installed, and inform his customers of the usage and maintenance conditions relevant to the product.
- The moving parts of the motors must be protected if operating at less than 2.50 m from the ground or another
surface.
- The installation must not be used if it shows any signs of damage (for example wear, damaged cables and
springs or ill adjusted end limits).
- The installation must be protected from all unauthorised use. Take preventive measures to avoid any spurious
operation.
- Children must be supervised to ensure they do not play with the equipment. Keep remote controls out of the
reach of children.
- This equipment is not intended for use by persons (including children) with impaired physical or mental capaci-
ties or those without the required knowledge or experience unless supervised by a person responsible for their
safety.
- Disconnect all the connection cables from the power supply before operating on the installation.
- Do not use the installation if operations (window cleaning for example) are being carried out nearby.
- Observe the assembly and use guidelines, in particular the safety instructions from the manufacturer of the
device to be used.
Subject to technical modications.
2.2. Specic safety advice
In addition to the safety instructions described in this guide, be sure to also observe the
instructions set out in the attached document "Safety instructions to follow and keep".
1) Switch off the mains supply for the external venetian
blind before performing any service operation in the
vicinity.
To avoid damaging the product:
2) Never immerse it in liquid!
3) Avoid impacts!
4) Do not drop it!
5) Never drill holes in it!
6) Avoid moving the blind if ice has formed on it.
1
3
5 6
2
4
OFF
58 © 2011 Somfy SAS. All rights reserved. 11/2011
EN
3. INSTALLATION
• Screw the 2 adaptors (1) using 2 M3x8 bolts (2) on
the motor shaft.
Tightening torque = 1.1 Nm
Ensure that the J4 io plate cable does not pass
over a rotating part of the motor or mechanism.
• If necessary, compress the edge of the head rail (4)
into the motor zone.
• Insert the motor into the head rail (4).
• Using the clips (5), attach the motor in the head rail
(4) above the acoustic tapes (6a).
• The shaft can be fitted into the adapter using a head-
less screw (7).
Installation with external clips
• Screw the 2 adaptors (1) using 2 M3x8 bolts (2) on
the motor shaft.
Tightening torque = 1.1 Nm
Ensure that the J4 io plate cable does not pass
over a rotating part of the motor or mechanism.
• Insert the motor into the head rail (4).
• Using the clips (5), attach the motor in the head rail
(4) above the acoustic tapes (6a).
• The shaft can be fitted into the adapter using a
headless screw (7).
5
4
7
7
4
3.1 57 X 51 mm or 58 x 56 mm head rail, open below
3.2 58 x 56 mm head rail, open above
2
7
1
1
7
2
6a
2
7
1
1
7
2
7
54
7
6a
5
5
59
© 2011 Somfy SAS. All rights reserved. 112011
EN
Installation with external clips
• Screw the 2 adaptors (1) using 2 M3x8 bolts (2) on
the motor shaft.
Tightening torque = 1.1 Nm
Ensure that the J4 io plate cable does not pass
over a rotating part of the motor or mechanism.
• Insert the motor into the head rail (4).
• Using the clips (5), attach the motor in the head rail
(4) above the acoustic tapes (6a).
• The shaft can be fitted into the adapter using a head-
less screw (7)
Installation with internal clips
• Screw the 2 adaptors (1) using 2 M3x8 bolts (2) on
the motor shaft.
Tightening torque = 1.1 Nm
Ensure that the J4 io plate cable does not pass
over a rotating part of the motor or mechanism.
• Insert the motor into the head rail (4).
• Using the clips (5), attach the motor in the head rail (4).
• The shaft can be fitted into the adapter using a head-
less screw (7).
The internal clips cannot be used with J418
motors (J4 motors with a torque of 18 Nm).
3.3 57 x 51 mm head rail, open above
1
2
12
4
5
7
7
7
7
5
2
7
1
1
7
2
7
54
7
6a
5
60 © 2011 Somfy SAS. All rights reserved. 11/2011
EN
Installation with J406/J410 motors
(torque of 6 or 10 Nm)
• Screw the 2 adaptors (1) using 2 M3 x 8 bolts (2) on
the motor shaft.
Tightening torque = 1.1 Nm
Ensure that the J4 io plate cable does not pass
over a rotating part of the motor or mechanism.
• Fit the two head rail adaptors (8) on the motor.
• Insert the motor into the head rail (4).
• Using the clip (5), attach the motor in the head rail (4).
• The shaft can be fitted into the adapter using a head-
less screw (7).
3.4 78 x 67 mm head rail, open below
1
21
2
8
5
8
5
5
7
7
7
7
4
61
© 2011 Somfy SAS. All rights reserved. 112011
EN
Assembly with J418 motor (torque = 18 N.m)
• Screw the 2 adaptors (1) using 2 M3 x 8 bolts (2) on
the motor shaft.
Tightening torque = 1.1 Nm
Ensure that the J4 io plate cable does not pass
over a rotating part of the motor or mechanism.
• Fit the two head rail adaptors (8) on the motor.
• Insert the motor into the head rail (4).
• Using the clip (5), attach the motor in the head rail (4).
• The shaft can be fitted into the adapter using a head-
less screw (7).
• Fit the additional calliper (9) to the head rail (4) +
motor assembly.
• Screw the calliper (9) to the motor with an M5 x 10 mm
bolt. Tightening torque = 4 N.m maximum.
The bolt must be compressed against the calliper (9).
1
21
2
8
5
8
5
5
7
7
7
7
4
9
62 © 2011 Somfy SAS. All rights reserved. 11/2011
EN
• Screw the 2 adaptors (1) using 2 M3 x 8 bolts (2) on
the motor shaft.
Tightening torque = 1.1 Nm
Ensure that the J4 io plate cable does not pass
over a rotating part of the motor or mechanism.
• Fit the two head rail adaptors (8) on the motor.
• Insert the motor into the head rail (4).
• Using the clips (5), attach the motor in the head rail (4).
3.5 67 x 66 mm head rail, open below
1
2
1
2
8
5
5
8
77
77
4
3.6 J4 io Plate
The J4 io plate is supplied connected to the motor; it must be integrated into or on the outside
of the head rail. If Somfy sensor is being used, the plate must be xed to the outside of the
head rail.
191 mm
25 mm
MAX
19 mm
MAX
63
© 2011 Somfy SAS. All rights reserved. 112011
EN
4. WIRING
M
Shared
Neutral
Earth
Motor
• Cut off the mains power supply.
This motor must not be connected to an isolati-
on transformer.
Only the io plate ref: 1811130 may be con-
nected to the J4 io motor.
• Connect the motor and plate assembly according to
the information in the table below:
• A maximum of 3 motors, with a total cable length of
50 m, can be connected in parallel. Live and neutral
must be connected together respectively.
230 V ~ 50 Hz
Neutral (N)
Live (P) Top
-
Plate cable
Blue
Black
-
1
2
3
Earth ( ) Yellow/Green
4
1
2
3
4
Plate
Mounting inside the head rail Mounting outside the head rail
• The mounting of the J4 io plate inside the head rail is compatible with the following head rails
and shafts:
In order to x the plate inside the head rail, you may use double sided adhesive tape ref: 9016646.
Mounting the plate with double sided adhesive tape is guaranteed to temperatures from -30°C
to 70°C. However, to ensure proper adhesion over time, it is essential to stick the tape to a
clean surface.
SHAFT
Up to 14 mm hex
Up to 14 mm square
Up to 14 mm diameter
HEAD RAIL
57 x 51 mm
58 x 56 mm
78 x 67 mm
65 x 64 mm
64 © 2011 Somfy SAS. All rights reserved. 11/2011
EN
5. COMMISSIONING
Programming the rst
Somfy local control
point
Only one motor should be powered at a time.
Switch on and follow procedure "a" or "b"
depending on the reaction of the blind:
a) The blind moves briey
The end limits are set and no
Somfy control point has been stored.
Go to the section entitled 5.5 "Programming the rst
Somfy io local control point".
or
b) The blind does not move
Press the Up or Down buttons and follow
procedure "c" or "d" depending on the reaction of the
blind:
c) The blind still does not move
The end limits are not set and no
Somfy control point has been stored.
Go to the section entitled 5.2 "Pre-programming the
Somfy io local control point".
or
d) The blind is fully raised or lowered
The end limits are set and the
Somfy control point has been stored.
Go to the section entitled "Operation".
5.2. Pre-programming the Somfy io local control point
The guide only describes commissioning using a Situo mobile io VB type Somfy io local control point
which provides greater precision when tilting the slats.
For commissioning using any other io control point, refer to the corresponding guide.
5.1. Identifying setting steps already completed
• Press the Up and Down buttons simultaneously.
The blind moves briey, the Somfy local
io control point is pre-programmed to the motor.
Pre-programming the
Somfy io local control
point
Operation
c or d
Other manuals for J4 io
4
Table of contents
Other SOMFY Controllers manuals
SOMFY
SOMFY animeo WM User manual
SOMFY
SOMFY Situo 1 RTS User manual
SOMFY
SOMFY animeo KNX 1860252 User manual
SOMFY
SOMFY CONTROL BOX 3S RTS User manual
SOMFY
SOMFY Connect UAI Plus User manual
SOMFY
SOMFY animeo IB+ 1860209 User manual
SOMFY
SOMFY animeo WM User manual
SOMFY
SOMFY animeo IB+ 2 AC User manual
SOMFY
SOMFY 5058465B Installation guide
SOMFY
SOMFY WISNIOWSKI Metro 800 RTS User manual
SOMFY
SOMFY 3S RTS User manual
SOMFY
SOMFY animeo EIB / KNX 4 AC Motor Controller WM/ DRM 220-240V... Quick start guide
SOMFY
SOMFY animeo LON 1860281 User manual
SOMFY
SOMFY WISNIOWSKI Metro 800 RTS User manual
SOMFY
SOMFY IGC User manual
SOMFY
SOMFY animeo IB+ User manual
SOMFY
SOMFY animeo IP 1822314 User manual
SOMFY
SOMFY animeo IB 9011809 User manual
SOMFY
SOMFY animeo KNX 1860286 User manual
SOMFY
SOMFY Animeo KNX/EIB WM Series User manual
Popular Controllers manuals by other brands
Digiplex
Digiplex DGP-848 Programming guide
YASKAWA
YASKAWA SGM series user manual
Sinope
Sinope Calypso RM3500ZB installation guide
Isimet
Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions
LSIS
LSIS sv-ip5a user manual
Rockwell Automation
Rockwell Automation 1769-L31 installation instructions
