Socket PocketPak User manual

Bar Code Scanning PocketPakTM

Quick Start Guide

Overview

The Socket Bar Code Scanning PocketPak allows you to scan bar codes

anytime anywhere with any Windows Powered Pocket PC. Just pop in the

scanner when you need it, then pull it out when you’re done. It’s that easy!

Created for busy professionals who need

mobile solutions that are easy and convenient

to use, the PocketPak features the Socket In-

Hand Scan Card (ISC), which lets you scan

with one hand.

This Quick Start Guide briefly shows how to

install and use the ISC. For more details (e.g.,

configuring special options), refer to the

User’s Guide, in Adobe Acrobat PDF format in the Docs folder on the Bar

Code Scanning PocketPak Installation CD.

For software updates, please visit: www.socketcom.com/download.htm

To register your ISC online, please visit: www.socketcom.com/prodreg.htm

To learn about other Socket PocketPaks, visit: www.socketpocketpak.com

Getting Started is Easy!

STEP 1: Install the software.

STEP 2: Insert the ISC.

STEP 3: Start SocketScan.

STEP 4: Assign a trigger button.

STEP 5: Start scanning data into a Pocket PC program!

STEP 1: Install the Software

1. Make an active connection between your Pocket PC and a host PC. Use

your Pocket PC’s serial or USB connection cable or cradle.

2. Insert the SocketScan Installation CD into the host PC.

3. Click Start/Run on your host PC and type X:\SETUP.EXE (replace X

with your CD drive letter).

4. In the second Setup Center screen, select Install Bar Code Scanning

PocketPak software.

5. Follow the wizard until software installation is done. When you see

Application Downloading Complete, click OK. Remove the serial/USB

cable or cradle.

STEP 2: Insert the In-Hand Scan Card

Use your Pocket PC’s CompactFlash I/O slot. Make sure the white Socket

logo is on top.

STEP 3: Start SocketScan

Go to Start , Programs, then tap on the SocketScan icon:

Whenever SocketScan is running and the ISC is inserted, the ISC icon

should appear in the Pocket PC task tray (visible from Today):

The “no card detected” icon may denote an improperly inserted card.

STEP 4: Assign a Trigger Button

Follow these steps and refer to your Pocket PC user documentation to assign

a trigger button:

1. Tap Start , then Settings. Tap on the Personal tab, then Buttons. Tap

on the Program Buttons tab:

2. From the Button list, select a button to trigger the In-Hand Scan Card. In

the Button assignment field, select SocketScan. When done, tap OK.

If SocketScan is not running yet, then pressing the trigger button will

result in launching SocketScan. Otherwise, pressing the trigger button

will fire the laser.

STEP 5: Scan Data into a Pocket PC Program

Follow these steps to use the ISC to scan data into any Pocket PC program.

For information about bar code scanning applications (available separately),

email info@socketcom.com

1. If not already open, start SocketScan. You can tap on your assigned

trigger button to quickly launch the program.

2. Start the application you want to receive the data, such as Pocket Word

or Pocket Excel. Inside the application, make sure a new document or

spreadsheet is open that you can scan data into.

3. Press your assigned trigger button and scan the bar code. Hold the ISC

3-12 inches away from the bar code. Aim the laser so it spans the entire

width of the code, at a slight angle (45° is optimal). An amber LED

indicates the laser is on.

For example, try the following Code 39 bar code:

Important! Do not look directly into the beam or point it at a person!

4. When data is read, a beep should sound, the laser should turn off, and the

LED should turn green for several seconds, indicating a good read. If the

ISC fails to read data within a few seconds, the amber LED and laser

beam will turn off, and you must try again.

Note: If your Pocket PC enters suspend mode when you are running

SocketScan, press the ON button. SocketScan will reinitialize itself.

5. After a successful scan, data should appear in your document. For

example, if you scan the bar code on the previous page into a Pocket

Excel spreadsheet, data should appear in the first cell:

6. To close SocketScan, tap on the ISC icon in the task tray, then tap Close.

If You Have Trouble…

Refer to the “Troubleshooting” section in the User’s Guide on the

installation CD. If problems persist, contact Socket’s technical support

department prepared with the following:

• The serial number of your ISC

• The Windows CE version number on your Pocket PC

• The manufacturer and model number of your Pocket PC

• What you did to try to correct the problem

To reach Socket’s technical support department:

• Email techsupport@socketcom.com

• Phone 510-744-2720

• Fax 510-744-2727

Table of contents

Socket PocketPak User manual

Popular Barcode Reader manuals by other brands