Socket CHS 7Ci User manual

Choose 2Rent

Phone 1 (800) 622-6484

Fax 1 (866) 937-8254

info@choose2rent.com

www.choose2rent.com

page 1 of 3

1. Powering ON:

Press and hold down the small

power button until the LED

turns

blue and the

scanner beeps

twice

2. Powering OFF:

Press and hold

down the small

power button until

the scanner beeps

twice.

3. Scanning Barcodes

After connecting the scanner to your

device, open an application. Put the

cursor where you want to enter data.

Hold the scanner about 4 inches from

the barcode and press and hold the

trigger button. Keep your hand steady

and make sure the red beam covers the

entire width of the barcode.

By default, the scanner will beep and

vibrate, and the LED will flash green to confirm that data was decoded

and sent to the host device.

4. Simultaneous Scanning and Soft Keyboard Support

The Scanner supports simultaneous use of the barcode scanner and

the Apple iOS on-screen keyboard while entering data into an

application.

To open or close the onscreen keyboard, quickly double-press the

power button (like double-clicking a mouse).

After you double-press the power button, the CHS will beep to

indicate that the onscreen keyboard was enabled / disabled.

Watch a video: http://www.youtube.com/watch?v=VhtttoC6ROs

Use your Bluetooth Scanner 7Ci

page 2 of 3

5. Pair the Scanner with the Apple device:

-Power on the Scanner

-Make sure the scanner is set to HID

Keyboard mode (default). If needed,

scan this barcode to set it to the

correct mode. The CHS will beep 3

times.

-Enable Bluetooth on the Apple device. Search for Bluetooth devices

-In the list of found devices, select Socket CHS [xxxxxx]. If

prompted, tap Pair.

6. Unpairing the scanner from your iPad or

iPhone

Power on the scanner. Press and hold the

TRIGGER and the POWER button together. After

you hear 3 beeps, release both buttons. The

scanner will unpair and power off.

7. BEEP Settings

Enables the Scanner to beep to indicate successful scans.

Disables the Scanner from beeping to indicate successful scans.

For full instructions visit:

http://www.socketmobile.com/pdf/data-collection/chs-7c_qs.pdf

Please call our support team if you need assistance

setting up your rental devices - 1(800) 622-6484

page 3 of 3

Other manuals for CHS 7Ci

Table of contents

Other Socket Barcode Reader manuals

Socket

Socket Gun Scanner (GS) 2X (Xtreme Performance) User manual

Socket

Socket 7 Series User manual

Socket

Socket CX2895-1508 User manual

Socket

Socket S740 User manual

Socket

Socket CHS Series 7 User manual

Socket

Socket 7Qi User manual

Socket

Socket SocketScan S550 User manual

Socket

Socket DuraScan D745 User manual

Socket

Socket CHS Series 7 Troubleshooting guide

Socket

Socket CHS Series 7 User manual

Socket

Socket CHS Series 7 User manual

Socket

Socket 5 Series User manual

Socket

Socket 8 Series User manual

Socket

Socket CompactFlash Scan Card Series 5 User manual

Socket

Socket CHS 7X User manual

Socket

Socket CHS 7Xi User manual

Socket

Socket SocketScan 700 Series User manual

Socket

Socket 9M User manual

Socket

Socket XtremeScan User manual

Socket

Socket DuraScan 700 Series User manual

Socket

Socket 800 SERIES User manual

Socket

Socket Wand Scanner 2E User manual

Socket

Socket CHS 7Ci User manual

Socket

Socket CHS Series 7 User manual

Socket CHS 7Ci User manual

Popular Barcode Reader manuals by other brands