Siqura BL2002M1-EI User manual
Unpack
Connector Definition
Installation Notices Connectors
Pan/Tilt/Rotate
Cabling through Junction Box
BL2002M1-EI
2MP Network Bullet Camera
Quick Start Guide
Find additional manuals, the datasheet,
the EU Declaration of Conformity, and
the latest firmware for this product at:
Siqura.com/downloads/software
Quick Start Guide
Note 1: Subject to modification. Actual product and accessories may differ in appearance.
© Siqura B.V. 2019
Vision 2.0 (01112019)
BL2002M1-EI QSG
Security Torx
NOTE:
IT IS NOT RECOMMENDED TO CONTINUOUSLY (24/7) RECORD WITH THE MICRO
SD CARD, AS THE CAMERA MAY NOT SUPPORT LONG-TERM CONTINOUS DATA
READ/WRITE. CONTACT THE MANUFACTURER OF THE MICRO SD CARD FOR
INFORMATION REGARDING THE RELIABILITY AND THE LIFE EXPECTANCY.
Screws(4x) &
Plastic Screw
Anchors (4x)
CAUTION:
INSTALLATION SHALL BE PERFORMED BY QUALIFIED PERSONNEL ONLY.
INSTALLATION SHALL BE IN ACCCORDANCE WITH LOCAL PROCEDURES.
INSTALLATION WITH POE SHALL BE IN UNEXPOSED NETWORKS.
BATTERY REPLACEMENT SHALL NOT BE APPLIED IN VIEW OF THE RISK OF
EXPLOSION.
IF YOU USE AN EXTERNAL POWER SUPPLY, CONTACT SIQURA TO MAKE SURE
THAT THE POWER SUPPLY HAS THE PROPER POWER SPECIFICATIONS.
MAKE SURE THAT THE POWER SUPPLY COMPLIES WITH LPS REQUIREMENTS.
Camera Unit
BNC Connector
1234
56
No.
Connector Definition
1
Alarm I/O
Alarm I/O connection
2
Audio
Audio Line in/Out
3
RJ
-45 Port
(Contact Siqura for a
compatible PoE
injector.)
For network and PoE connections
4
Power (DC12V)
Power connection
5
SD Card Slot
Insert the SD card into the card slot to store
videos and snapshots. Do not remove the SD card
when the camera is powered on.
6
Reset Button
Press the button with a proper tool for at least 20
seconds to restore the system.
Table 1 Connector definition
Pin Pusher
Pipe Cover
Mounting Adapter
Accessing the camera –Fixed IP address
Auto detect with SDM2 Browser-based Viewer
IP = 192.168.0.x
Network Switch
DHCP Server
Siqura.com/downloads/software
SDM2-vx.xx-setup.zip
23
1
11
IP = 192.168.0.x
30s
1st time camera login
qwer1234
x6W@oM0a!9#F
Set a strong password
IP = 10.x.y.z
Network Switch
DHCP Server
IP = 10.x.y.z
IP = 10.x.y.z
DHCP
Accessing the camera - DHCP Server
Mounting
Wall/Pole Mount
Ceiling Mount
NOTE:
OTHER THAN MOUNTING ABOVE, OTHER MOUNTING MAY CAUSE POTENTIAL
WATER LEAKAGE AT CAMERA, WHICH IS NOT INCLUDED IN WARRANTY.
Other Siqura Security Camera manuals
Siqura
Siqura BC820H1-SFP User manual
Siqura
Siqura XCU Series User manual
Siqura
Siqura MD20 User manual
Siqura
Siqura SA-BL37 User manual
Siqura
Siqura BL2002F4-EI User manual
Siqura
Siqura 910 Series User manual
Siqura
Siqura MSD622 User manual
Siqura
Siqura FD1103 User manual
Siqura
Siqura SA-BL37 User manual
Siqura
Siqura CD820F1 User manual
Siqura
Siqura FD820M1 User manual
Siqura
Siqura pd1103 User manual
Siqura
Siqura HD10A User manual
Siqura
Siqura HSD820H3PRH User manual
Siqura
Siqura BC2xSeries User manual
Siqura
Siqura BL810F1IR User manual
Siqura
Siqura HSD820H3EXP User manual
Siqura
Siqura sa fixed series User manual
Siqura
Siqura XCU Fusion User manual
Siqura
Siqura CD820 Series User manual
