Siqura HD18EXP User manual
HD18EXP
Explosion-proof analogue PTZ dome camera with Day/Night
Installation Manual
Note: To ensure proper operation, please read this manual thoroughly before using the
product and retain the information for future reference.
Copyright © 2013 Siqura B.V.
All rights reserved.
HD18EXP
Installation Manual v1 (131311-1)
AIT55
Nothing from this publication may be copied, translated, reproduced, and/or published by
means of printing, photocopying, or by any other means without the prior written permission
of Siqura.
Siqura reserves the right to modify specifications stated in this manual.
Brand names
Any brand names mentioned in this manual are registered trademarks of their respective
owners.
Liability
Siqura accepts no liability for claims from third parties arising from improper use other than
that stated in this manual.
Although considerable care has been taken to ensure a correct and suitably comprehensive
description of all relevant product components, this manual may nonetheless contain errors
and inaccuracies. We invite you to offer your suggestions and comments by email via
[email protected]. Your feedback will help us to further improve our documentation.
How to contact us
If you have any comments or queries concerning any aspect related to the product, do not
hesitate to contact:
Siqura B.V.
Zuidelijk Halfrond 4
2801 DD Gouda
The Netherlands
General : +31 182 592 333
Fax : +31 182 592 123
E-mail : [email protected]
WWW : www.siqura.com
2
Contents
1 About this manual ..................................................................................... 4
2 Safety and compliance .............................................................................. 5
2.1 Safety requirements ............................................................................ 5
2.2 Cautions ............................................................................................. 5
2.3 Regulations ......................................................................................... 7
3 Product overview ...................................................................................... 8
3.1 Features ............................................................................................. 8
3.2 Models ............................................................................................... 8
3.3 Operation requirements ........................................................................ 9
3.4 Package contents ................................................................................. 9
3.5 HD18EXP mounting accessories ............................................................. 9
3.6 Dimensions ......................................................................................... 10
4 Dome setup and cable connection ............................................................. 11
4.1 Switch and connector definition ............................................................. 11
4.2 Communication switch configuration ...................................................... 12
4.3 ID configuration .................................................................................. 13
4.4 Dome control protocol configuration ....................................................... 13
4.5 Cable definition and requirements .......................................................... 14
4.6 22-Pin data cable ................................................................................. 15
4.7 22-Pin connector definition ................................................................... 15
4.8 RS-485 connector definition .................................................................. 16
4.9 Cable wiring and connection .................................................................. 16
5 Use a control keyboard ............................................................................. 18
5.1 Baud rate ........................................................................................... 18
5.2 Functions ............................................................................................ 18
5.3 Cable definitions .................................................................................. 18
Appendix: Technical specifications ............................................................ 20
3
1 About this manual
What this manual covers
This manual describes how to install and connect the HD18EXP, Siqura's explosion-proof,
analogue PTZ dome camera with Day/Night. Instructions for configuration and operation of
the HD18EXP can be found in the User Manual.
Who should read this manual
This manual is intended for technicians involved in the installation of HD18EXP cameras.
What you should already know
To be able to install and connect the HD18EXP properly, you should have adequate knowledge
and skills in the following fields.
● CCTV systems and components
● Electrical wiring and low-voltage electrical connections
● Video, audio, data, and contact closure transmissions
● Hazardous environments and ATEX regulations
Before you start the installation
We advise you to read and observe all instructions and warnings in this manual before you
proceed. Retain this manual with the original bill of sale for future reference and warranty
service. When you unpack your product, check for missing or damaged items. If any item is
missing, or if damage is evident, do not install or operate this product. Contact your supplier
for assistance.
Important: The printed manual referenced by DEX-MAN-11-138-A and the printed checklist
referenced by DEX-MAN-10-119-A are the governing documents for installation of the
HD18EXP. These must be followed to the letter by the installer. For additional installation
information, see also the printed Supplementary Installation Information document.
Why specifications may change
At Siqura, we are committed to delivering high-quality products and services. The information
given in this manual was current when published. As we are relentlessly working to improve
our products and user experience, all specifications are subject to change without notice.
We like to hear from you!
Customer satisfaction is our first priority. We welcome and value your opinion about our
products and services. Should you detect errors or inaccuracies in this manual, we would be
grateful if you would inform us. We invite you to offer your suggestions and comments via
[email protected]. Your feedback helps us to further improve our documentation.
4
2 Safety and compliance
This chapter contains safety instructions telling you what to do and what not to do when you
work with the HD18EXP. It also offers information on product compliance with environmental
regulations and explains how to dispose of the product at the end of its service life.
In This Chapter
2.1 Safety requirements................................................................................................5
2.2 Cautions................................................................................................................5
2.3 Regulations............................................................................................................7
2.1 Safety requirements
General
The safety information contained in this section, and on other pages of this manual, must be
observed whenever this unit is operated, serviced, or repaired. Failure to comply with any
precaution, warning, or instruction noted in the manual is in violation of the standards of
design, manufacture, and intended use of the module. Siqura assumes no liability for the
customer's failure to comply with any of these safety requirements.
Trained personnel
Installation, adjustment, maintenance, and repair of this equipment should conform to all
local codes and should be performed by trained and qualified personnel with adequate
expertise in hazardous area practice and ATEX requirements. For correct and safe use of the
equipment and in order to keep the equipment in a safe condition, it is essential that both
operating and servicing personnel follow standard safety procedures in addition to the safety
precautions and warnings specified in this manual, and that this unit be installed in locations
accessible to trained service personnel only.
2.2 Cautions
Reduce the risk of electric shock
To reduce the risk of electric shock, do not perform any servicing other than contained in the
operating instructions unless you are qualified to do so.
Reduce the risk of ignition of hazardous atmospheres
To reduce the risk of ignition of hazardous atmospheres, disconnect the equipment from the
supply circuit before opening. Keep assembly tightly closed when operating. Conduit runs
must have a sealing fitting connected within 2 inches of the enclosure.
Warning: TO REDUCE THE RISK OF IGNITION DO NOT OPEN WHEN AN EXPLOSIVE GAS
ATMOSPHERE MAY BE PRESENT.
5
Handle the camera carefully
Do not abuse the camera. Avoid striking, shaking, etc., as the camera can be damaged by
improper handling or storage.
Install electrical wiring carefully
Ask a qualified electrician to perform the wiring for the installation. For power specifications,
see Appendix: Technical specifications of the Installation Manual. Ground the camera
appropriately to prevent electric shock or damage. Do not block any ventilation openings.
Install in accordance with the manufacturer’s instructions.
Do not disassemble the camera
To prevent electric shock, do not remove screws or covers. There are no user-serviceable
parts inside. Consult technical support if a camera is suspected of malfunctioning.
Do not operate the camera beyond the specified temperature,
humidity, and power source ratings
Use the camera under conditions where the temperature, humidity, and power source do not
exceed the values and ranges given in Appendix: Technical specifications of the Installation
Manual.
Never face the camera towards the sun
Do not aim the camera at bright objects. Whether the camera is in use or not, never aim it at
the sun or other extremely bright objects, as this can damage the camera.
Do not use strong or abrasive detergents
Use a damp cloth to clean the camera when it is dirty. If the dirt is hard to remove, use a mild
detergent and wipe gently. To clean the lens, use lens tissue or a cotton tipped applicator and
ethanol. Do not clean the lens with strong detergents.
Safety and compliance
6
2.3 Regulations
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following conditions.
● This device may not cause harmful interference.
● This device must accept any interference received, including
interference that may cause undesired operation.
This symbol on the product or on its packaging indicates that this
product shall not be treated as household waste in accordance with
Directive 2002/96/EC. Instead it shall be handed over to the
applicable collection point for the recycling of electrical and
electronic equipment. By proper waste handling of this product you
ensure that it has no negative consequences for the environment
and human health, which could otherwise be caused if this product is
thrown into the garbage bin. The recycling of materials will help to
conserve natural resources.
For more information on how to recycle this product, please contact
your local city office, your household waste disposal service or the
seller of the product.
Compliance is evidenced by written declaration from our suppliers,
assuring that any potential trace contamination levels of restricted
substances are below the maximum level set by EU Directive
2002/95/EC, or are exempted due to their application.
Safety and compliance
7
3 Product overview
The HD18EXP is a high-speed, explosion-proof, analogue PTZ dome camera which delivers
superb performance and durability in extremely harsh and hazardous environments, while
reducing the risk of explosion from, for example, electrical and dust ignition. This chapter
introduces the HD18EXP and its features.
In This Chapter
3.1 Features................................................................................................................8
3.2 Models.................................................................................................................. 8
3.3 Operation requirements...........................................................................................9
3.4 Package contents....................................................................................................9
3.5 HD18EXP mounting accessories................................................................................ 9
3.6 Dimensions.......................................................................................................... 10
3.1 Features
Siqura HD18EXP PTZ Dome
● 1/4" CCD (Super HAD 2 CCD)
● 36x Optical zoom
● 12x Digital zoom
● Preset speed up to 400°/sec
● Preset position / Sequence / Autopan / Cruise
● Multiple PTZ protocols supported
● Digital slow shutter
● Day/Night with IR-cut filter
● Auto white balance
● Wide dynamic range
● Backlight compensation
● 16 Masking zones
● 4 Alarm inputs, 1 alarm output
● Stainless steel housing
● IP67 Ingress Protection
● ATEX Approved for gas and dust
3.2 Models
The HD18EXP series includes models with NTSC ( /N) and PAL support ( /P).
8
3.3 Operation requirements
A minimum of one control device is required for operation, such as a control keyboard, a DVR,
or a PC. The HD18EXP contains a built-in receiver that decodes commands originating from a
control device.
The built-in Pelco D protocol provides connectivity to other surveillance systems and allows
the HD18EXP to be integrated with the surveillance systems of other suppliers.
For more information, see Appendix: Technical specifications ( on page 20).
3.4 Package contents
Before you proceed, verify that the box contains the items listed here. If any item is missing
or has defects, do not install or operate the product. Contact your supplier for assistance.
Explosion-proof housing with dome
body inside
30 cm cable harness for power supply, video, and
RS-485
CD containing Installation Manual and
User Manual
Printed documentation:
- DEX-MAN-11-138-A
- DEX-MAN-10-119
- Supplementary Installation Information
- EC Declaration of Conformation
3.5 HD18EXP mounting accessories
The following products are available to mount the HD18EXP camera.
WMEX-01 Wall Mount, Stainless steel, Explosion-proof PTZ
CMEX-01 Ceiling (Pendant) Mount, Stainless steel, Explosion-proof PTZ
PMEX-01 Pole Mount, Stainless steel, Explosion-proof PTZ
Product overview
9
3.6 Dimensions
The dimensions of the HD18EXP including its housing are Ø195 x 373 mm (Ø7.7 x 14.7 in.).
See the following diagrams for detailed dimensions.
HD18EXP dimensions: side view (top) and base view (bottom)
Product overview
10
Table of contents
Other Siqura Security Camera manuals
Siqura
Siqura HSD820V2H3-E User manual
Siqura
Siqura HSD820 Series User manual
Siqura
Siqura CD820F1 User manual
Siqura
Siqura HD18 SA User manual
Siqura
Siqura PD1103Z2-E User manual
Siqura
Siqura BL2005M1-EI User manual
Siqura
Siqura XCU Fusion User manual
Siqura
Siqura MSD622 User manual
Siqura
Siqura FD360IR Series User manual
Siqura
Siqura FD2x Series User manual
Siqura
Siqura FD12 Owner's manual
Siqura
Siqura pd1103 User manual
Siqura
Siqura FD1103 User manual
Siqura
Siqura HSD62 series User manual
Siqura
Siqura PD9 0 Series User manual
Siqura
Siqura SA-BL37 User manual
Siqura
Siqura FD2005M1-EI User manual
Siqura
Siqura BL1103M1-EI User manual
Siqura
Siqura CD820 Series User manual
Siqura
Siqura BC820H1-SFP User manual
