Siemens CFG3.F200 User manual

Edge Controller F200 - CFG3.F200

Product Data Sheet

Edge Controller F200 for the cloud integration of FIN Framework, FIN Stack

and/or third-party systems.

●2-port Ethernet switch for LAN (includes daisy chaining)

●1-port Ethernet for WAN

●USB interface for 4G dongles

●Operating voltage AC 24 V or DC 24 V

●Mounting on standard rails or on the wall

●Plug-in screw terminal blocks

●Multi-site management

●Remote operation and monitoring

●Alarm treatment

●Remote tool access, update, and configuration via Siemens Cloud Services

Functions F200 Edge Controller provides two integration levels for connecting devices to the cloud:

System integration (between the F200 and the devices) and cloud integration (between the

F200 and the cloud).

A broad range of devices can be integrated on the system level. F200 Edge Controller

supports various protocols (BACnet, Modbus) and Ethernet.

The device supports Ethernet and 4G on the cloud level via the MQTT protocol.

The specific set of supported functions may vary according to the region (for example UL

markets) and according to the connected system. Detailed information about the latest

supported functions can be found in the release notes of the installed software.

Application F200 Edge Controller is a physical device where FIN Framework or FIN Stack is running to

monitor and control building/s. Additionally to that, FIN Edge2Cloud is provided for secure

remote access with no requirement for a VPN.

It can also securely transmit data to the cloud over cable networks or over mobile networks

(e.g. 4G: With a router). 4G USB Dongle support is available in addition (see “Accessories”).

Type summary

Type

Order number

Description

CFG3.F200

S55842-Z133

Embedded FIN Framework/FIN

Stack device

Equipment combinations

Accessories

The accessories listed below are tested but not sold by J2 Innovations:

Manufacturer

Type

Description

Siemens

6EP3332-6SB00-0AY0

Power supply DC 24 V / 2.5 A

Verizon

USB730L / MC730

4G USB Dongle

Huawei

E3372 / E3372h - 153

4G USB Dongle

Huawei

E3372 / E3372h - 320

4G USB Dongle

Alcatel

IK40V-2AALDE1

4G USB Dongle

Please confirm compatibility of the chosen 4G Dongle according to the infrastructure of your

regional Internet Service Provider before choosing and ordering a specific device (i.e.

compatibility of regional 4G frequency bands). Consult “4G Dongle Commissioning Guide”

for further instructions and information.

Technical and mechanical design

The compact build can be mounted on standard rails or walls.

Plastic housing

LEDs for communication and status

Service button

4 a)

2-port Ethernet switch with 2 LEDs per port

4 b)

1-port Ethernet interface with 2 LEDs for WAN

(Internet access)

Plug-in terminal blocks with screw terminals

Power supply

USB interface for 4G dongles

Not supported (For future release)

Slider for mounting on standard mounting rails

Eyelets for cable ties

Holes for wall mounting

Date / Series and Serial number

LED indicators

Activity

LED / Interface

Color

Activity

Function

Ethernet 1...3

Green

Continuously ON

Link active

Continuously OFF

No connection

Flashing

Network traffic

Yellow

Continuously ON

Link 100 Mbps

Continuously OFF

Link 10 Mbps

RUN

Green

Continuously ON

Device operational

Continuously OFF

Device not operational

Flashing

Start-up or program halted

Red

Continuously OFF

Continuously ON

HW or SW fault –power off and on the

F200

Rapid flashing

Firmware or application

missing/corrupted

Blue

Continuously ON

Connection to the cloud OK

Flashing

No connection to the cloud

Onboarding to cloud not finished or

device certificates not updated

Notes

Safety

CAUTION

National safety regulations

Failure to comply with national safety regulations may result in personal injury and property

damage.

●Observe national provisions and comply with the appropriate safety regulations.

Mounting position and ambient temperature

The devices can be snapped onto standard rails or screwed onto a flat surface.

Plug-in screw terminals connect power and interfaces (except for Ethernet).

Ambient temperature -5...50 °C (23...122 °F)

Ambient temperature -5...45 °C (23...113 °F)

●Wall, horizontal

–From left to right

–From right to left

●Overhead

●Wall, vertically

–From top to bottom

–From bottom to top

●On a horizontal surface

CAUTION

Risk of overheating for failure to comply with ambient temperature

Burning and damage to the device

●Ensure sufficient ventilation to comply with the permissible ambient temperature within

the panel or installation box. The temperature must be at least 10 K (18° F) lower

outside the installation box.

Installation

WARNING

Electric shock

Incorrect installation of the device may lead to electric shock injuries when touching the

device!

●Install the device in a lockable cabinet or use terminal covers.

●Do not install the device in locations where children are likely to be present.

●Conductors with a cross-section of 0.5 mm2 (AWG24) or greater shall comply with the

requirements of IEC 60332-1-2 and IEC 60332-1-3 or IEC TS 60695-11-21.

Commissioning / service

NOTICE

When using a 4G dongle

Reboot the device after a 4G dongle has been connected.

For details see 4G Dongle Setup (A6V12059208).

Technical data

Power supply

Operating voltage 24 V AC (24 V≃, ⏊, )

AC 24 V -15 / +20 % (SELV / PELV) or

AC 24 V Class 2 (US)

48…63 Hz

Operating voltage 24 V DC

DC 24 V -15 / +20 % (SELV / PELV) or

DC 24 V Class 2 (US)

Functional ground (US)

Functional earth

The terminal for the functional ground must be

connected on the installation side with the building

grounding system (PE).

Screw terminals for wire cross sections up to

Max. 2.5 mm2(14 AWG)

Internal fusing

2.5 A irreversible / non-replaceable

External supply line fusing (EU)

Non-renewable fuse max. 10 A slow

circuit breaker max. 13 A

Tripping characteristic B, C, D per EN 60898

Power supply with current limitation of max. 10 A

Power consumption (for transformer planning)

Power consumption AC

16 VA

Power consumption DC

8 W

Function data

Hardware information

Processor

NXP i.MX8 DualX

Storage

2 GB RAM

8 GB eMMC

Data backup in the event of power failure

Super cap to support real-time clock (7 days).

Interfaces

Ethernet interfaces

Plug

3 x RJ45, shielded

Interface type

10Base-T / 100Base-TX, IEEE 802.3 compatible

Bit rate

10/100 Mbps, autosensing

Protocol

BACnet on UDP/IP, Modbus TCP/IP, KNX IP, Haystack

over RESTful API, OPC UA, oBix, Sedona, and SQL.

Cabling, cable type

10 Mbps: Min. CAT3, shielded cable is recommended

100 Mbps: Min. CAT5, shielded cable is recommended

Cable length

Max. 100 m (330 ft)

Screw terminals, plug-in

Cu-wire or Cu-strand with wire end sleeve

1 x 0.6 mm ∅to 2.5 mm2(22 to 14 AWG)

or 2 x 0.6 mm ∅to 1.0 mm2(22 to 18 AWG)

Cu-strand without wire end sleeve

1 x 0.6 mm ∅to 2.5 mm2(22 to 14 AWG)

or 2 x 0.6 mm ∅to 1.5 mm2(22 to 16 AWG)

Stripping length

6...7.5 mm (0.24...0.29 in)

Screwdriver

Slot screws, screwdriver size 1 with shaft ø = 3 mm

Max. tightening torque

0.6 Nm (0.44 lb ft)

USB interface (4G internet connection)

Plug

Type A

Interface type

USB 2.0

Bit rate

480 Mbit

Max. load

500 mA

Max. cable length

5 m

Conformity

Ambient conditions and protection classification

Classification as per EN 60730

Automatic action

Control function

Degree of pollution

Overvoltage category

Type 1

Class A

III

Design

Suitable for use in protection class I or II systems

Ambient conditions and protection classification

Degree of protection of housing to EN 60529

Front parts in DIN cut-out

Terminal part

IP30

IP20

Climatic ambient conditions

●Storage / Transport (packaged for transport) as per

IEC EN 60721-3-1 / IEC EN 60721-3-2

●Operation as per IEC/EN 60721-3-3

●Class 1K22 / 2K12

Temperature -25...70 °C (-13...158 °F)

Air humidity 5...95 % (non-condensing)

●Class 3K23

Temperature -5...50 °C (23...122 °F)

(for details see chapter Mounting)

Air humidity 5...95 % (non-condensing)

Mechanical ambient conditions

●Transport per IEC/EN 60721-3-2

●Operation as per IEC/EN 60721-3-3

●Class 2M4

●Class 3M11

Standards, directives and approvals

Product standards

EN 60730-1 and EN 62368-1

Product family standard

EN 50491-x

Electromagnetic compatibility (EMC)

For residential, commercial, and

industrial environments

EU conformity (CE)

See CE declaration 1)

UL/cUL approbation (US / Canada)

UL916; http://ul.com/database

CSA certification

C22.2, http://csagroup.org/services-industries/product-

listing

Environmental compatibility 1)

The product environmental declaration1) contains data

on environmentally compatible product design and

assessments (RoHS compliance, materials

composition, packaging, environmental benefit,

disposal).

1) Documents can be downloaded at http://siemens.com/bt/download.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

●Reorient or relocate the receiving antenna.

●Increase the separation between the equipment and receiver.

●Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

●Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful interference, and

2. this device must accept any interference received, including interference that may cause

undesired operation

FCC Caution: Changes or modifications not expressly approved by Siemens Switzerland

Ltd. could void user authority to operate the equipment. United States representative

https://new.siemens.com/us/en/products/buildingtechnologies/home.html

Housing

Color top/bottom

RAL 7035 (light grey) / RAL 7016 (anthracite grey)

Dimensions

per DIN 43 880, see dimensions

Weight with/without packaging

350 g / 300 g

Connection terminals

Terminal

Symbol

Description

1A, 1B

2 x RJ45 interface for Ethernet with switch

LAN (customer network)

1 x RJ45 interface for Ethernet

WAN (internet access)

5, 6

≃, ⏊,

Operating voltage AC 24 V, DC 24 V

Functional ground (must be connected on the installation side with the building

grounding system (PE).

USB

USB interface for 4G dongles

Dimensions All dimensions in millimeters and inches.

65 66 67 68 69 70

AC/DC 24VWANLAN 1B1A 2

6 7

Disclaimer Please see this link for more information about OSS for the CFG3.F200.

124 (4.88")

117 (4.61")

110 (4.33")

129 (5.08")

4.1(0.16")

144 (5.67")

26.5 (1.04")

45 (1.77")

69.5 (2.73")

74.5 (2.93")

4 (0.16")

21.5 (0.85")

11 (0.43")

45 (1.77") 21.5 (0.85")

11 (0.43")

35.5 (1.40")

49 (1.91")

Table of contents

Other Siemens Controllers manuals

Siemens

Siemens SIMATIC NET CP 1613 A2 User manual

Siemens

Siemens Simatic S7-1500 User manual

Siemens

Siemens RRV851 User manual

Siemens

Siemens SIRIUS 3RW40 24 Series User manual

Siemens

Siemens SIMATIC S7-400H User guide

Siemens

Siemens PXC00-U User manual

Siemens

Siemens RDF270 User manual

Siemens

Siemens SIMATIC S5 User manual

Siemens

Siemens SINUMERIK 828D Turning User manual

Siemens

Siemens RWD68U Owner's manual

Siemens

Siemens Simatic S7-1500 User guide

Siemens

Siemens 5WG1 513-1AB11 User manual

Siemens

Siemens SIDOOR AT18 User manual

Siemens

Siemens CPU 410-5H Process Automation User guide

Siemens

Siemens S7-1200 TELECONTROL User guide

Siemens

Siemens SIRIUS 3RA142 8XC21 Sries User manual

Siemens

Siemens UP 227 Service manual

Siemens

Siemens simovert masterdrives User manual

Siemens

Siemens SITRANS I100 7NG4124-0AA00 User manual

Siemens

Siemens SIRIUS 3RW50 User manual

Siemens

Siemens Albatros2 RVA78.690 User manual

Siemens

Siemens SIMOTION C230-2 User manual

Siemens

Siemens RMH760 User manual

Siemens

Siemens SIDOOR ATE500E User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual

3M MicroTouch EX113 reference guide