Siemens MOD-16 User manual

P/N 315-090830-8

Installation Instructions

Model MOD-16

Output Driver

INTRODUCTION

The Model MOD-16 MXL Output Driver from

Siemens Industry, Inc. is an annunciator driver

that activates up to 16 outputs.

The Model MOD-16 is controlled by the MOI-7

module (See P/N 315-092799). Up to eight

MOD-16s can be used with an MOI-7.

OPERATION

Each MOD-16 activates any of its 16 program-

mable outputs for LEDs or for 24V lamps. The

selection of either the desired LEDs or the 24V

lamps is made at 16 positions on dipswitches S1

and S2 (See Figure 1).

If LEDs are used, open all dipswitches in S1

and S2 to provide for current limiting. Opening

a dipswitch (OFF position) inserts a 2.7K ohm

resistor in series with the output.

If 24V lamps or the SR-35 are used, close all the

dipswitches. Closing a dipswitch (ON position)

eliminates the 2.7K ohm limiting resistor.

CAUTION: PROPER SETTING OF THE DIP-

SWITCH IS NECESSARY TO

PREVENT CIRCUIT DAMAGE.

For additional information on the MXL/MXLV

System, refer to the MXL/MXLV Manual,

P/N 315-092036.

INSTALLATION

Remove all system power before installation,

first battery and then AC. (To power up, first

connect the AC and then the battery.)

1. Mount the MOD-16 in one module space on a

System 3 type rail using the four screws

provided.

2. Connect the MOD-16 to the MOI-7 with the

10-position ribbon cable P/N 555-190940

provided with the MOI-7.

3. If a connection to a MOD-16 module on

another rail is required, use the optional

cable P/N 555-190941.

ELECTRICAL RATINGS

Terminal voltage: 40V peak maximum

Maximum current for each output: 50mA

Siemens Industry, Inc.

Building Technologies Division

Florham Park, NJ

Siemens Building Technologies, Ltd.

Fire Safety & Security Products

2 Kenview Boulevard

Brampton, Ontario

L6T 5E4 Canada

tnerruCeludoMCDV5evitcAAm2

tnerruCeludoMCDV42evitcA Am05+Am0 detcennocrep tuptuo

tnerruCeludoMCDV42ybdnatSAm

NOTES:

1. 18 AWG minimum for LED and 24V

lamp connections.

2. 14 AWG minimum for supply connec-

tions (TB1-9 and 10, TB2-9 and 10).

3. All wiring must be in accordance with

NEC 760.

4. All wiring must conform to local codes

and to the authority having jurisdiction

over the installation.

5. All wiring to MOD-16 is unsupervised

and must not leave enclosure.

6. For additional information see MOI-7

Module instructions, P/N 315-092799.

7. A maximum of 8 MOD-16s can be

used with the MOI-7.

8. When using SR-35, refer to Table 1.

9. Both TB1-9 (or 10) and TB2-9 (or 10)

must be connected to the common of

the power supply.

P/N 315-090830-8

Figure 1

Wiring Connection

TABLE 1

Connection to SR-35 Module*

Note: When using SR-35 with MOD-16, jumpers

P1-P8 on SR-35 must be in position B.

MOD-16 SR-35 Screw Termina

TB1-1 4

TB1-2 8

TB1-8 32

To PSR-1, TB3-1, or to

PS-35, TB1-5 33

To PSR-1, TB3-2, or to

PS-35, TB1-6 35

*For additional information see:

SR-35 Instructions (P/N 315-087691)

PS-35 Instructions (P/N 315-085062)

PSR-1 Instructions (P/N 315-090911)

Other Siemens Control Unit manuals

Siemens

Siemens SIMATIC CPU 410 User guide

Siemens

Siemens SINUMERIK 840D sl User manual

Siemens

Siemens SITRANS F M MAGFLO series User manual

Siemens

Siemens LMV37.4 Series Operator's manual

Siemens

Siemens SiPass Driver User manual

Siemens

Siemens 6ES5-424 Product manual

Siemens

Siemens 6ES7134-4FB51-0AB0 User manual

Siemens

Siemens SINUMERIK 808D Installation guide

Siemens

Siemens RDM-MXL User manual

Siemens

Siemens Synco RMK770 User manual

Siemens

Siemens SIMATIC S7-1500R/H User manual

Siemens

Siemens SIMATIC NET User manual

Siemens

Siemens SIPROTEC 7SJ80 User manual

Siemens

Siemens 7153 User manual

Siemens

Siemens 4AI RTD User manual

Siemens

Siemens SIMATIC 500 Series Manual

Siemens

Siemens SIMOCODE pro User manual

Siemens

Siemens SIRIUS 3RA2711 C Series User manual

Siemens

Siemens SIMATIC NET PG-5412 User manual

Siemens

Siemens 3RK2 Series User manual

Siemens

Siemens ASR61EX User manual

Siemens

Siemens Siwarex U User manual

Siemens

Siemens SITOP DC UPS 6EP1931-2DC21 User manual

Siemens

Siemens SINUMERIK 840D sl User manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual