Securitytronix ST-D6003.6

v1.0 1/14/11

INSTALLATION MANUAL

ST-D6003.6 –B or –W

Indoor Color Dome Camera

With CMOS Sensor

v1.0 1/14/11

PACKAGE CONTENTS

This package contains:

One ST-D6003.6 indoor color dome camera with CMOS sensor

One installation manual

Note: The ST-D6003.6 requires a minimum 12VDC 500mA power supply such as the

ST-PS12VDC1A or ST-PS12VDC2A.

PRODUCT DESCRIPTION

The ST-D6003.6 is an indoor color dome camera designed around a 1/3” CMOS sensor with

600TVL of resolution auto white balance and super back light compensation. The camera’s size,

packaging and 2-axis mount allow it to be easily and discretely installed. Its rich color, high

definition, stability and resistance to jamming make it attractive for CCTV security applications.

SPECIFICATIONS

ST-D6003.6

Specifications (Typical)

1. Image Sensor

1/3” CMOS Digital Image Sensor

2. Pixels (HxV)

768x494

3. Scanning System

NTSC

4. Horizontal Resolution

600TV Lines

5. Synchronization

Internal, Negative Sync

6. Minimum Illumination

0.1Lux Color, 0.05Lux B&W

7. Scanning System

Interlaced

8. Auto Electronic Shutter

1/60s~1/100,000s

9. White Balance

Automatic

10. Lens

3.6mm Fixed Lens

11. S/N Ratio

>63.8dB AGC Off

12. BLC

Super Back Light Compensation

13. Gamma Characteristic

0.15

14. Video Output

1.0Vp-p/75Ω

15. Operating Temperature

14F°- 122°F

16. Operating Humidity

95% Relative Humidity

17. Power

DC12V 500mA

v1.0 1/14/11

INSTALLATION AND OPERATION

CAUTION: To reduce the risk of electrical shock do not remove the cover or back of this

unit. No user serviceable parts are inside.

CAUTION: To prevent electric shocks and risk of fire hazards, do not use other than

specified power source.

1. UNPACKING and HANDLING

Each unit is shipped assembled and factory tested.

Ensure that all accessories are removed from the container before discarding packing material

2. MECHANICAL INSPECTION

Inspect the front and rear of the equipment for shipping damage. Make sure the equipment is

clean, and no connectors are broken, damaged, or loose. If equipment appears to be

damaged or defective please contact your distributor or SecurityTronix at 1-610-429-1511 for

assistance.

3. SPECIAL ATTENTION

a. The installer must comply with electrical safety standards. There must be sufficient

space between the camera’s power supply and video line and any high voltage

equipment and/or cables.

b. To help ensure the camera’s life and proper operation do not point the camera

towards the sun or strong light.

c. Do not install the camera in an environment where the temperature is above 122°F.

d. Do not install the camera near a magnetic field or a high-power motor.

e. Do not mount the camera near a radiator or heater.

f. Only use a dry cloth to clean the camera. If there is dirt that is difficult to remove wipe

gently with a mild detergent. Never use strong or abrasive detergents.

g. A minimum 12VDC 500mA power supply must be used. AC power cannot be applied.

Using an AC or other incorrect power supply will damage the camera.

h. Only qualified installers are allowed to install, test and disassemble the camera.

i. The camera is a low voltage product designed for indoor use and should not be

installed outdoors. If installed outdoors proper safety and lightening grounding are

required.

This symbol is intended to alert the user to the presence of important operating and

maintenance (servicing) instructions.

This symbol is intended to alert the user to the presence of uninsulated “dangerous

voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a

risk of electrical shock.

v1.0 1/14/11

4. WIRING CONNECTIONS

a. Connect the power supply’s DC plug to the camera’s power outlet.

b. Connect the camera to the monitor with a 75Ωcoaxial video cable.

c. Connect power supply’s AC plug to a suitable AC power outlet.

d. Adjust the lens direction according to the required surveillance area and environment.

Effective Monitoring Area

v1.0 1/14/11

5. TROUBLESHOOTING

a. No picture after applying power –(i) check all plugs and cables are securely

connected to the proper connectors; (ii) ensure your power supply is providing the

correct voltage and current.

b. The picture has ripples –(i) check to see if the power supply is experiencing AC ripple,

if so a filter may be required; (ii) determine if the monitor is faulty; (iii) determine if

other peripheral equipment is causing ripple and if so make the necessary

adjustments.

c. The picture background continuously changes color –a fluorescent lamp’s magnetic

field may cause color roll, therefore, reduce the number of fluorescent lamps or

increase the distance between the camera and the lamps.

d. The picture appears smeared –(i) the power supply voltage level may be unstable,

therefore, try another power supply; (ii) ensure the cables are correctly connected

and/or the cables are of the correct impedance.

e. Other interference may require a SecurityTronix ground loop isolation filter.

f. Additional troubleshooting assistance can be found on-line at www.securitytronix.com

in addition to support from SecurityTronix sales engineers at 1-610-429-1511.

This manual suits for next models

Table of contents

Other Securitytronix Security Camera manuals

Securitytronix

Securitytronix ST-BTWD600IR40-B User manual

Securitytronix

Securitytronix ST-D4203.6B User manual

Securitytronix

Securitytronix ST-DWD650IRVP2812-B/W User manual

Securitytronix

Securitytronix ST-BT6003.6-W2 User manual

Securitytronix

Securitytronix ST-D600VP3.6-B-W User manual

Securitytronix

Securitytronix HD-COAXINATOR ST-HD-PTZ-2MP User manual

Securitytronix

Securitytronix HD-CDAXINATORTVI ST-HDC2VFD-MZ User manual

Securitytronix

Securitytronix ST-PTZ480-22X User manual

Securitytronix

Securitytronix ST-D540IRVP49-S User manual

Securitytronix

Securitytronix ST-DWDIRVF2812-720B User manual

Securitytronix

Securitytronix HD-COAXINATOR TVI ST-HDC2FB-CNV User manual

Securitytronix

Securitytronix ST-HD-D2812M-2MP User manual

Securitytronix

Securitytronix ST-DLI6502812-JBX-B User manual

Securitytronix

Securitytronix ST-IP6FE User manual

Securitytronix

Securitytronix HD-COAXINATORTVI ST-HDC2PTZ User manual

Securitytronix

Securitytronix ST-DWD650IR-B User manual

Securitytronix

Securitytronix ST-DLI540IRVP-B User manual

Securitytronix

Securitytronix ST-BTLI540IRVFDV User manual

Securitytronix

Securitytronix HD-Coaxinator ST-HD-BT2812-1MP User manual

Securitytronix

Securitytronix ST-IP2VFB User manual

Securitytronix

Securitytronix ST-IP2IRPTZ User manual

Securitytronix

Securitytronix ST-D1000P-W User manual

Securitytronix

Securitytronix ST-IP4FWD User manual

Securitytronix

Securitytronix ST-HD-BT3.6-1MP User manual

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications

Securitytronix ST-D6003.6 –B User manual

Popular Security Camera manuals by other brands