Securitytronix ST-USB-KB User manual
0
ST-USB-KB
USER MANUAL
www.securitytronix.com
www.nacebrands.com
ST-USB-KB USER MANUAL
1
About this Manual
This Manual is applicable to the Securitytronix ST-USB-KB.
The Manual includes instructions for using and managing the product. Pictures, charts, images and all other
information hereinafter are for description and explanation only. The information contained in the Manual
is subject to change, without notice, due to firmware updates or other reasons.
Please use this user manual under the guidance of professionals to ensure a safe and proper deployment.
Legal Disclaimer
THIS HARDWARE AND SOFTWARE IS PROVIDED BY SECURITYTRONIX "AS IS'' AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL SECURITYTRONIX S BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS HARDWARE AND SOFTWARE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
THE USE OF THE PRODUCT SHALL BE WHOLLY AT YOUR OWN RISK. SECURITYTRONIX SHALL
NOT BE LIABLE FOR ANY ABNORMAL OPERATION, BREACH OF PRIVACY OR OTHER DAMAGES
RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET
SECURITY RISKS. SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL
RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE
THAT USE CONFORMS TO ALL APPLICABLE LAWS. SECURITYTRONIX SHALL NOT BE LIABLE IN
THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.
For further assistance, or if you encounter any issue while using this product, please contact
your distributor or Securitytronix at: 800-688-9282 Press 3 for support, then 2 for CCTV.
2
Regulatory information
FCC information
FCC compliance: This equipment has been tested and found to comply with the limits for a digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at his own expense.
FCC conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the
applicable harmonized European standards listed under the Low Voltage Directive 2006/95/EC, the EMC
Directive 2004/108/EC, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal
waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of
equivalent new equipment, or dispose of it at designated collection points. For more information see:
www.recyclethis.info.
2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal
waste in the European Union. See the product documentation for specific battery information. The battery is
marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For
proper recycling, return the battery to your supplier or to a designated collection point. For more information see:
www.recyclethis.info.
ST-USB-KB USER MANUAL
3
Preventive and Cautionary Tips
Before connecting and operating your keyboard, please be advised of the following tips:
Ensure unit is placed in a well-ventilated, dust-free environment.
Keep all liquids away from the keyboard.
Please check the power supply to avoid damage caused by a voltage mismatch.
Please make sure the keyboard work in the allowed range of temperature and humidity.
ST-USB-KB USER MANUAL
4
Table of Contents
Chapter 1 Product Overview...............................................................................................4
1.1 Introduction................................................................................................................. 4
1.2 Typical Application..................................................................................................... 4
1.3 Controlling Mode........................................................................................................ 4
Chapter 2 Functional Keys and Joystick ...............................................................................6
2.1 Function Keys ............................................................................................................. 6
2.2 Joystick....................................................................................................................... 7
Chapter 3 Keyboard Application..........................................................................................8
3.1 USB Keyboard Mode................................................................................................ 8
3.1.1 Setting Keyboard Mode................................................................................ 8
3.1.2 Keyboard Control ......................................................................................... 8
3.2 USB Joystick Mode................................................................................................. 10
3.2.1 Keyboard Parameter Settings.................................................................... 10
3.2.2 DVR/NVR Control...................................................................................... 12
Appendix1: Specification.....................................................................................................14
Appendix2: Device Upgrade ................................................................................................15
ST-USB-KB USER MANUAL
Chapter 1 Product Overview
1.1 Introduction
The ST-USB-KB keyboard is a USB interface controlling keyboard which supports USB
HID protocol; it can be applied with USB joystick mode and supports various programmable
keys for users to set custom functions. The keyboard can be used to control Securitytronix
EZ Connect II, HDCII deviceswith function key operation. Simplified GUI provides ease of
operation, and can be deployed in various applications from residential to commercial.
1.2 Typical Application
Make sure the DVR/NVR connected supportsthe ST-USB-KB keyboard access. The ST-USB-
KB is a USB keyboard independently developed by Securitytronix for use with the CMS
software, DVR,NVR, and PC-DVR, and can perform functions such as windows switch, PTZ
control, capture, recording, etc.
1.3 Controlling Mode
The ST-USB-KB keyboard connects with a PC via USB interface and supports two ways of
controlling: USB keyboard mode and USB joystick mode.
ST-USB-KB
ST-IP-KB USER MANUAL
5
With the use of DVR/NVR, it can control the menu selection, camera switch in live view, PTZ
control, etc.
The default mode is set as USB joystick mode when it is powered on for the first time; there is
no need to install additional drivers.
USB keyboard mode supports private SDK accessing and functions such as quick switch,
PTZ control, capture and recording.
It is required to install drivers before setting the ST-USB-KB to USB keyboard mode.
Two types of drivers can be selected, depending on 32 BIT or 64 BIT systems.
ST-USB-KB USER MANUAL
6
Chapter 2 Functional Keys and Joystick
2.1 Function Keys
Refer to the following figure and table for the description of the function keys.
1
2
4
6
3
5
7 8
Table 1. 1 Description of Keyboard
NO.
Key Name
Function Description
1
0 to 9 Number
Keys
USB Keyboard Mode: For selecting window or channel;
USB Joystick Mode: For custom shortcuts;
2
Enter
USB Keyboard Mode: For confirming the input number;
3
Window/Channel
Switch
Press and hold for more than 5s to switch between keyboard mode
and joystick mode;
USB Keyboard Mode: For selecting window switching mode or
channel switching mode;
(The window indicator lights while in window switching mode; and
the channel indicator lights while in channel switching mode.)
4
Capturing
USB Keyboard Mode: Capture;
USB Joystick Mode: Custom shortcut as number 12;
5
Recording
USB Keyboard Mode: For recording;
USB Joystick Mode: Custom shortcut as number 11;
6
F1, F2, F3
USB Keyboard Mode: Custom Shortcut;
USB Joystick Mode: F1-13,F2-14,F3-15
7
Indicator
Single Indicator: The keyboard is in USB keyboard mode;
Double Indicator: The keyboard is in USB joystick mode;
8
Digital Display
Display the input number.
ST-USB-KB USER MANUAL
7
2.2 Joystick
Table 1. 2 Description of Joystick
Graphic
Operation
Function
Up
PTZ control mode: Move the PTZ up.
Down
PTZ control mode: Move the PTZ down.
Left
PTZ control mode: Move the PTZ left.
Right
PTZ control mode: Move the PTZ right.
Contrarotate
Zoom Out (ZOOM-)
Clockwise Rotate
Zoom In (ZOOM+)
The PTZ joystick speed ratio has 64 levels of adjustment from slow to very fast.
ST-USB-KB USER MANUAL
8
Chapter 3 Keyboard Application
3.1 USB Keyboard Mode
3.1.1 Setting Keyboard Mode
Press and hold the key Window/Channel for more than 5s, and the keyboard will auto switch its
mode. If the single indicator is on, the unit is in USB keyboard mode.
3.1.2 Keyboard Control
USB keyboard mode supports window switch between client live view interface and video wall
interface, focusing window channel switch and PTZ control functions. The buttons F1, F2 and F3
can be set as functions like previous, next, preset, etc. according to certain needs and it supports
capturing and recording functions in the live view interface.
1. Shortcut Switch:
Click the button Window/Channel in the main live view interface or video wall interface, and
the window indicator will light. Click the letter Iand the OK button, and it will switch to the
corresponding window. If the client supports camera switch function, you can click the button
Window/Channel and the indicator will light; then you click the letter Jand the OK button to
switch the channel Jto window I.
Example: You can input number 504 or 0504 with the OK button as the figure above to switch to
the sub window 4 of window 5.
ST-USB-KB USER MANUAL
Table of contents
Other Securitytronix Keyboard manuals
