Scitex 5000 Series Guide

Scitex Digital Printing, Inc.

5000 Series Printheads

REPLACEMENT INSTRUCTIONS

5120/5240/5122

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment gener-

ates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to

radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to cor-

rect the interference at his own expense.

Note: Good quality, shielded (braided shielded) cables must be used for the RS-232-C and Centronics interfaces.

Canadian EMI Compliance Statement

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe A prescrites dans

le Règlement sur le brouillage radioélectrique édicté par le ministère des Communications du Canada.

This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the

Canadian Department of Communications.

EMI-CISPR 22/EN 55 022/CE Marking

Warning: This is a Class A product. In a domestic environment, this product may cause radio interference in which case the user may be required to take ade-

quate measures.

5000 Series Printheads Replacement Instructions, 5120/5240/5122

3000 Research Blvd., Dayton, OH 45420-4099

This document contains proprietary information of Scitex Digital Printing, Inc. or its licensors and is their exclusive property. It may not be reproduced

without a written agreement from Scitex Digital Printing, Inc. No patent or other license is granted to this information.

The software described in this document is furnished under a license agreement. The software may not be used or copied except as provided in the license

agreement.

Scitex Digital Printing, Inc. makes no warranty of any kind with regard to the contents of this document, including, but not limited to, the implied warranties

of merchantability and fitness for a particular purpose. Scitex shall not be liable for any errors or for compensatory, incidental or consequential damages in

connection with the furnishing, performance, or use ofthis document or the examples contained herein. Information concerning products not manufactured by

Scitex Digital Printing, Inc. is provided without warranty or representation of any kind, and Scitex Digital Printing, Inc. will not be liable for any damages

resulting from the use of such information.

VersaMark and what’s next in print are trademarks of Scitex Digital Printing, Inc. Scitex and the Scitex logo are registered trademarks and service marks of

Scitex Corporation Ltd. Dijit is a registered trademark. FaxBack is a trademark of FaxBack, Inc. All other trademarks are property of their respectiveowners.

0113480 03/2002 Printed in U.S.A.

Part Number Revision Date Description ECN

0113480 001 12/2001 Revised for 5000 series, combined all three printheads SDP170

Previous Releases

Part Number Revision Date Description ECN

0113453 002 06/2001 5122 printhead PKG981

0113927 001 04/1998 Addendum for current 5240 PKG108

0113650 001 01/1997 5120 printhead 08975

0113705 000 03/1996 Early 5240 printhead 08278

Replacement Instructions iii

Scope

These instructions describe how to replace any of the following Scitex

Dijit®5000 Series Printheads:

•5120

•5240

•5122.

These instructions apply only to the currently manufactured models of

printheads.

Scope

iv 5000 Series Printheads

Text Notations This manual uses the following typographical conventions.

Safety Notations The following definitions indicate safety precautions to the operator.

Note: Information that needs to be brought to the reader’s attention.

Caution: A situation where a mistake could result in the destruction of data or

system-type damage.

!WARNING

A potential hazard that could result in serious injury or death.

!DANGER

An imminent hazard that will result in serious injury or death.

This style Refers to

Ready

Text displayed by the software.

Anything you type, exactly as it appears, whether referenced

in text or at a prompt.

ENTER Special keys on the keyboard, such as enter, alt, and spacebar.

[NEXT] Buttons and lights on the printer operator panel.

Save Software command buttons and sections of dialog boxes,

such as group boxes, text boxes, and text fields.

File →Open A menu and a specific menu command.

ALT+F1Pressing more than one key at the same time.

ALT,TAB Pressing more than one key in sequence.

xx,yy Variable in error messages and text.

jobfile.dat File names.

Scope

Replacement Instructions v

Service and Support Technical equipment support is available 24 hours a day, 7 days a week.

Software and applications support is available 8:00 a.m. to 5:00 p.m.

EST/EDT, Monday through Friday.

Phone Fax

U.S.A. and Canada

Field/Telephone support 1-800-4SCITEX

(1-800-472-4839) +1-937-259-3808

Europe

Field/Telephone support +4121-806-0404 +4121-806-1920

Asia/Pacific Rim

Field/Telephone support +65-744-6400 +65-744-6700

Japan

Field/Telephone support +81-3-3256-2613 +81-3-3256-2616

Worldwide Technical support,

order placement, documentation,

and product information requests

+1-937-259-3739 +1-937-259-3808

Worldwide Automated FaxBack™

Information Line +1-937-259-3520

Internet

Updated service information http://www.scitexdpi.com

The above telephone number listing is accurate as of the publication date. On the

Internet, go to http://www.scitexdpi.com/support for updated telephone numbers.

Replacement Instructions 1

Replacement Procedures

The following sections describe how to remove and install the following

three 5000 series printheads:

•5120

•5240

•5122.

General Guidelines The 5240 procedure applies only to the currently manufactured 5240

(serial numbers 3000 and higher).

Printheads must be re-packed in the original shipping container. Always

retain the box and all packing materials sent with the printhead.

Always take ESD precautions when handling a printhead.

Release all printhead tubing quick disconnects by pressing the release

button and gently pulling back the fitting. Some fittings are twist-lock

connectors rather than quick-disconnects.

Before removing the starting the removal procedure, record the printhead

hours. Hours are displayed by Jetscape diagnostics under Fluid System

→ Status.

For a 5240 printhead, record the eyelid serial number along with the

printhead serial number (control number). Check that the eyelid number

matches the printer number when installing a printhead.

Remove the front, rear, and bottom printhead covers before starting the

printhead removal procedure. Cover removal is not shown.

2 5000 Series Printheads

Replacement Procedures

Replacement Instructions 3

Replacement Procedures

5120 Printhead Use the following procedures to remove a 5120 printhead and install a

replacement printhead.

Removal 1. Turn off the printer by pressing [PRINTER ON].

2. Release the printhead filter (1) from its clip.

3. Disconnect the printhead catcher fluid tube quick disconnect fitting

from the printhead assembly catcher fluid tube fitting (2).

4. Disconnect the quick disconnect fitting on the inlet line (3).

5. Allow the printhead ink to drain back into the ink supply. Allow

several seconds, or until the line looks empty.

6. Reconnect the catcher tube (2).

7. Disconnect the quick disconnect fitting on the outlet line (4).

8. Connect the manifold sides of the ink inlet and outlet together (5).

9. Connect the printhead sides of the ink inlet and outlet together (6).

10. Remove the two screws (7) securing the resonator board (8) to its

standoffs and unplug it from its connector.

11. Carefully unplug the paddle board (9) from its two connectors.

12. Remove the cotter pin (10) securing the eyelid pin (11), and then pull

out the eyelid pin.

13. Remove the eyelid (12), plunger (13) and attached actuator arm (14).

The plunger and arm will separate from the eyelid. Retain the eyelid,

plunger, and arm; they must be used with the replacement printhead.

Note: On older 5120 printheads, squeeze the retaining pins to release

the eyelid assembly and pull it out.

14. Support printhead (15), then loosen the two captive screws (16)

securing the printhead to the housing.

15. Lower the printhead to reach the catcher tube (17) and disconnect it.

16. Remove the printhead and place it on a static-protected surface.

17. Pack the printhead in its original container for storage or return. See

the Packing Instructions (0113479).

4 5000 Series Printheads

Replacement Procedures

16 17

This manual suits for next models

Table of contents

Other Scitex Printer manuals

Scitex

Scitex Dijit 5000 Series User manual

Popular Printer manuals by other brands

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series quick start guide

Evolis

Evolis Elypso user guide

Kyocera

Kyocera FS-9530DN specification

Canon

Canon LASER SHOT LBP-1210 Specifications

Samsung

Samsung BIXOLON SRP-350plusF user manual

Canon

Canon PIXMA PRO-1 Series Getting started

Canon

Canon PIXMA G3560 Online manual

Dell

Dell Color Laser Printer 2130cn user guide

Tektronix

Tektronix Phaser 840 user guide

Epson

Epson ET-7750 Programming guide

Canon

Canon CLBR 460ps Service manual

Eltron

Eltron P210 Guide manual

Ricoh

Ricoh MD-P1 Service manual

Epson

Epson SC-F7100 series user guide

Epson

Epson Stylus C40UX Service manual

Canon

Canon imagePASS-A2 Service guide

Canon

Canon S820D user guide