Schlage Connect Smart Deadbolt User manual
Quick Start Guide
Backup Key
Touchscreen
Assembly
Backplate
Reinforcement
Plate
Bolt
Strike
Reinforcement
Screws
Inside Assembly
Screw
Backplate
Screws
Bolt/Strike
Screws
Parts
Set Screw
Battery
Cover
Inside
Assembly
Thumbturn
Interactive experience
For an improved installation experience, follow the
link below or scan the QR code for online interactive
instructions, warranty, and reference information.
https://instructions.allegion.
com/instr/86/2110
Tools
Don’t use a power drill!
Phillips screwdriver
1 2 3
4 5
U.S.A.: 888-805-9837
Canada: 800-900-4734
Mexico: 018005067866
Support
Need Help?
See “Help with Step 1” in the online
instructions. The link is on the back
cover or the third page of this guide.
1
step
Actual Size
Make sure the
word “TOP” is
facing up.
Install the bolt.
You may have to adjust your bolt length. Make sure the slot in
the bolt is centered in the hole.
Slot is
centered
in the hole.
No change
needed.
Twist the
faceplate to
extend. Keep
twisting
until 2 ¾”.
Install the strike into the door frame.
2
step
Actual Size
Actual Size
Install
this strike
reinforcer for
enhanced
security.
Need Help?
Trouble installing the strike reinforcer? See
“Help with Step 2” in online instructions.
If you have a window next to your door, you may not be able
to use the longer wood screws to install the reinforcer.
3
step
Install the touchscreen.
Route the cable through the door BELOW the bolt. Align the
tailpiece as shown and push the touchscreen onto the door.
Is it hard to install the touchscreen?
Is the tailpiece not installing correctly?
If the hole through your door seems
too small, you may need to remove the
spacer. See the online instructions.
The bump on the
tailpiece aligns
with the slot in the
bolt.
4
step
Install the inside backplate.
Route the cable below the bolt and through the hole on the
bottom of the backplate. Secure the backplate with screws.
Hold the touchscreen
on the outside of
the door while you
tighten the screws.
TOP
Make sure
that “TOP”
is facing
out.
Actual Size (2)
Don’t use a power drill!
You may damage your lock!
Phillips screwdriver
1 2 3
4 5
5
step
Take off the battery cover.
Phillips screwdriver
Connect the cable.
6
step
The connector ts
only one way.
Table of contents
Other Schlage Door Lock manuals
Schlage
Schlage L9000 Series User manual
Schlage
Schlage AL-SERIES User manual
Schlage
Schlage FC60 User manual
Schlage
Schlage BR260 User manual
Schlage
Schlage PC60 User manual
Schlage
Schlage L9080EL User manual
Schlage
Schlage BE469 User manual
Schlage
Schlage L9000 Series User manual
Schlage
Schlage SchlageTouch BE375 User manual
Schlage
Schlage VIP 5100 series User manual
Schlage
Schlage BE365 User manual
Schlage
Schlage L-SERIES User manual
Schlage
Schlage BE365 User manual
Schlage
Schlage AD-250 User manual
Schlage
Schlage CONNECT User manual
Schlage
Schlage SENSE User manual
Schlage
Schlage AD-Series User manual
Schlage
Schlage LM9300 User manual
Schlage
Schlage AD-Series User manual
Schlage
Schlage AD-200 User manual
