Savant SmartControl 12 Quick reference guide

SSC-0012 Deplyment Guide | 009-1268-02 1 of 10 45 Perseverance Way, Hyannis, MA 02601

Savant® SmartControl 12 - SmartController Deployment Guide

Document Number: 009-1268-02

Document Date: June 2021

Document Supports: da Vinci 7.0 and higher

This document will guide the installer through the process of installing, conﬁguring, and adding a Savant SmartControl 12 Controller to a RacePoint Blueprint®

conﬁguration.

–SmartControl 12 Controller [SSC-0012]

SSC-0012 Deplyment Guide | 009-1268-02 2 of 10 45 Perseverance Way, Hyannis, MA 02601

Contents

To access links to the topics within this document, click the corresponding entry in the table below.

1. Before You Begin ...............................................................................................................3

2. Deployment Steps .............................................................................................................4

3. Installation.............................................................................................................................5

3.1. Mounting Plate Installation....................................................................................5

3.2. Rack or Cabinet Installation..................................................................................5

4. Wiring and Connections..................................................................................................6

4.1. Power and Ethernet .................................................................................................6

4.2. Control Connections ................................................................................................6

5. RacePoint Blueprint® Conﬁguration............................................................................7

6. Upload Conﬁguration .......................................................................................................8

7. Additional Documentation .............................................................................................9

SSC-0012 Deplyment Guide | 009-1268-02 3 of 10 45 Perseverance Way, Hyannis, MA 02601

1. Before You Begin

Read through this document in its entirety and ensure that the following required items are available:

SmartControl 12 (SSC-0012) controller......................................................................................................................................................................................

Unique ID (UID) of the controller.................................................................................................................................................................................................

(located on the bottom of the unit)

Savant Host (Smart or Pro Host) licensed and running da Vinci 7.0 or higher..........................................................................................................

Savant Development Environment (SDE/MacBook®) ..........................................................................................................................................................

(with RacePoint Blueprint da Vinci 7.0 or higher installed)

Ethernet network meeting Savant requirements...................................................................................................................................................................

See Savant Device Networking Guidelines on the Savant Customer Community.

SSC-0012 Deplyment Guide | 009-1268-02 4 of 10 45 Perseverance Way, Hyannis, MA 02601

2. Deployment Steps

To successfully deploy a Savant Rack Mountable Host, follow the steps listed below. This page can be used as a checklist to track progress as

items are completed.

Review the SSC-0012 Connections and Controls and Mount Controller......................................................................................................................

See the Savant Customer Community for more information

Wire Controller to Savant Control System ...............................................................................................................................................................................

See Wiring and Connections

Add the SSC-0012 to a RacePoint Blueprint conﬁguration ...............................................................................................................................................

See RacePoint Blueprint Conﬁguration

Upload Conﬁguration to Savant Host ........................................................................................................................................................................................

See Upload Conﬁguration

SSC-0012 Deplyment Guide | 009-1268-02 5 of 10 45 Perseverance Way, Hyannis, MA 02601

3. Installation

The SSC-0012 should be located in a place that is dry, well ventilated, and out of direct sunlight.

3.1. Mounting Plate Installation

A mounting plate (074-0577-xx) is supplied with the SSC-0012

controller. This mounting plate can be used to mount the controller

to a wall or existing structure.

1. Position the mounting plate onto the wall where the controller

will be located. Position the bracket so the tabs that secure

the controller in the mount, are positioned horizontally.

2. Mark the two mounting holes on the wall.

3. Install wall anchors and screw the mounting plate to the wall.

4. Snap the SSC-0012 controller into the bracket so the tabs on

the mounting bracket seat into the slots on the side of the

controller.

Controller

Mounting

Bracket

Tab ﬁts

into slot

3.2. Rack or Cabinet Installation

When mounting in a rack or cabinet, the controller should be set

on a solid, ﬂat, level surface.

The next step is to connect the required ports. Refer to the Wiring

and Connections section.

SSC-0012 Deplyment Guide | 009-1268-02 6 of 10 45 Perseverance Way, Hyannis, MA 02601

4. Wiring and Connections

Refer to the diagram below when making connections.

4.1. Power and Ethernet

Smart or Pro Host

SSC-0012

Local Area

Network

Power Supply

Cat 5/5e/6

RJ-45

1. Connect RJ-45 Cat 5/5e/6 Ethernet cable from Ethernet port to the local network switch.

2. Plug the supplied power supply from the 12V DC port into a 120V AC surge protected outlet.

4.2. Control Connections

Information on wiring the IR, RS232, and GPIO control connections are available in the Savant SmartControl 12 [SSC-0012] Quick Reference Guide

on the Savant Customer Community.

SSC-0012 Deplyment Guide | 009-1268-02 7 of 10 45 Perseverance Way, Hyannis, MA 02601

5. RacePoint Blueprint® Conﬁguration

Add the SmartControl 12 controller to the conﬁguration.

1. From the RacePoint Blueprint menu bar, open the Component

Library.

View > Show Component Library

2. Enter SSC-0012 in the search box.

3. Select the SSC-0012 from the Component Library and drag it into

one of the zones/rooms.

4. Enter a Unique name that identiﬁes the controller in the pop-up

window that opens

NOTE: Controllers are typically added to the Shared Equipment Zone but

not required.

5. Drag the SSC-0012 into Blueprint's layout window.

6. Select the SSC-0012 and open the inspector.

View > Show Inspector

7. Enter the Unique ID of the SSC-0012 into the Savant UID ﬁeld. See

image below. UID can be found on the label on the bottom of the

device.

7. Close the Inspector window.

8. Connect the Ethernet port of the SSC-0012 to the local network

device.

9. Refer to the Relay and General Purpose Input/Output Proﬁles

Application Note on the Savant Customer Community for details on

the various control ports available in the SSC-0012 proﬁle.

Enter Savant

Unique ID (UID)

SSC-0012 Deplyment Guide | 009-1268-02 8 of 10 45 Perseverance Way, Hyannis, MA 02601

6. Upload Conﬁguration

After the SSC-0012 has been added to Blueprint and the conﬁguration is complete, upload the conﬁguration to the host.

1. Select the Generate Services icon from the Blueprint toolbar. The State icon in the RacePoint Blueprint toolbar will change to either blue or green

indicating the services for the conﬁguration are created..

2. Select File > Save from the Blueprint menu bar.

3. Optional: Select Update All UI Screens > Sync with Services (only if necessary) from the Blueprint toolbar to sync any TrueControl II interfaces to the

services. The State icon will change to green when complete.

4. Select the Upload to Master icon from the Blueprint toolbar and answer the prompts to upload the conﬁguration to the Savant Pro System Host.

5. The System Monitor application will automatically open as displayed in the image below. Verify the path to the conﬁguration ﬁle is correct. Select

Upload when satisﬁed.

6. The conﬁguration will begin uploading to the Host. Once complete, verify the controllers function as expected.

Select Upload to Master

savant.user

SSC-0012 Deplyment Guide | 009-1268-02 9 of 10 45 Perseverance Way, Hyannis, MA 02601

7. Additional Documentation

Additional documentation is available on the Savant Customer Community.

–SmartControl 12 Smart Controller (SSC-0012) QRG - 009-1255-xx

–Relay and General Purpose Input/Output Proﬁles Application Note

Network Guidelines

See the Savant Device Networking Guidelines topic on the Savant Customer Community for networking recommendations.

Network Changes

Savant recommends performing the following steps to refresh the IP connection after connecting to a new network, changing routers, or if the IP Address range

is changed in the current router. This will reset any IP connection and ensure that the Host is communicating with the network correctly.

1. Hot Plug the Ethernet (LAN) Connection

2. Disconnect the Ethernet (LAN) connection from the Host.

3. Wait 15 seconds and then reconnect.

SSC-0012 Deplyment Guide | 009-1268-02 10 of 10 45 Perseverance Way, Hyannis, MA 02601

Important Notice

Disclaimer

Savant Systems, Inc. reserves the right to change product speciﬁcations without notice, therefore, the information presented herein shall not be construed

as a commitment or warranty.

Savant Systems, Inc. shall not be liable for any technical or editorial errors or omissions contained herein or for incidental or consequential damages

resulting from the performance, furnishing, reliance on, or use of this material.

Patents

Certain equipment and software described in this document is protected by issued and pending U.S. and foreign patents.

All products and services are trademarks or registered trademarks of their respective manufacturer.

of this document is prohibited without the permission of Savant Systems.

Trademarks

TrueCommand, TrueControl, and the Savant logo are trademarks of Savant Systems, Inc.

AirPlay, Apple, AirPort Express, AirPort Extreme, Apple TV, Apple Remote Desktop, FireWire, iMac, iTunes, iPad, iPad mini, iPad Air, iPhone, MacBook, Mac

and OS X are trademarks or trade names of Apple Inc. iOS is a trademark of Cisco®. Android, Google, Google Play, and other Google marks are trademarks

of Google, Inc. Wi-Fi is a registered trademark of the Wi-Fi Alliance®. HDMI® is a trademark of HDMI Licensing, LLC. MOTU® is a registered trademark of

Mark of the Unicorn, Inc. Luxul is a registered trademark of Luxul Wireless. NETGEAR®, the NETGEAR Logo and ProSAFE are trademarks of NETGEAR, Inc.

Extreme™ is a trademark of Extreme Networks, Inc.

All other brand names, product names, and trademarks are the property of their respective owners.

Technical and Sales Support

Savant Systems, Inc. is dedicated to providing prompt and eective support in a timely and ecient manner.

–To contact Savant Support, access the Savant Customer Community and enter a support Case ticket.

–To contact Savant Sales, visit Savant.com and select Contact Us to locate a local sales representative in your area.

Other manuals for SmartControl 12

This manual suits for next models

Table of contents

Other Savant Controllers manuals

Savant

Savant SmartControl SSC-W002G User manual

Savant

Savant CPT-1212 User manual

Savant

Savant SmartControl 3 User manual

Savant

Savant SmartMedia 6 User manual

Savant

Savant SmartControl SSC-W003I User manual

Savant

Savant SSC-W485 User manual

Savant

Savant Savant SmartLighting 2 User manual

Savant

Savant SmartLighting 2 User manual

Savant

Savant Director Lite HST-DIRECTORLITE User manual

Savant

Savant ICC-TP00 User manual

Savant

Savant HST-4001 User manual

Savant

Savant SmartControl 3 User manual

Savant

Savant SmartControl 12 User manual

Savant

Savant SmartControl RS232 User manual

Savant

Savant SSC-0008 User manual

Savant

Savant SmartControl 3 User manual

Savant

Savant S2 User manual

Savant

Savant Lamp Controller User manual

Savant

Savant SmartControl User manual

Savant

Savant SmartControl 12 User manual

Savant

Savant SmartLighting SSL-P018 User manual

Savant

Savant SmartLighting 18 User manual

Savant

Savant SmartControl 3 Quick reference guide

Savant

Savant SmartMediaPro 6 Quick reference guide

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual