SATO PV3 Instruction manual

Wireless LAN Connection Manual

BARCODE PRITNER

Rev. 1.00

PV3

Rev. 1.00 - 2 -

Wireless LAN Connection Manua

■Table of Contents

1. Manual Information........................................................................................................3

2. Precautions ....................................................................................................................3

3. How to Connect .............................................................................................................4

3-1 Android Soft AP mode (default) ..................................................................................6

3-2 iOS Soft AP mode (default) ........................................................................................7

3-3 How to change infrastructure mode............................................................................8

4. Factory Reset ...............................................................................................................10

Rev. 1.00 - 3 -

Wireless LAN Connection Manua

1. Manual Information

This Wireless LAN manual provides information on the connection of a wireless network

with the mobile printer.

We at SATO maintain ongoing efforts to enhance and upgrade the functions and

quality of all our products. The following product specifications and/or user manual

content may be changed without prior notice.

2. Precautions

2-2If a device (such as a microwave oven, Wireless LAN, etc.) that uses the same

frequency is present, transmission may be interrupted. Separate the printer and

Bluetooth-enabled device from such interrupting devices by a distance of at least 5m.

2-1 The printer has to be within 100m (Outdoors) from AP (Access point) to connect to a

Wireless LAN. Although up to 35m is possible to communicate indoors, Wireless LAN

performance could be affected by the environmental conditions, such as cement walls,

and impede signal strength performance. The printer's LCD shows the connection status of

the Wireless LAN:

- Indicates that the Wireless LAN is connected normally

- Indicates that the Wireless LAN password is wrong

- Indicates that the AP of the set SSID is not nearby

Rev. 1.00 - 4 -

Wireless LAN Connection Manua

3. How to Connect

Wireless LAN can be configured through the printer’s Wireless LAN interface. Likewise,

Wireless LAN can also be configured though the printer’s Serial/USB interfaces.

(1) Connecting Printer

1) Serial / USB cable

Connect Serial/USB cable to Printer, PC device.

When Serial cable use, baudrate between Device and printer should be the same.

2) Wireless LAN

Connect to the AP (Access Point) configured in Infrastructure mode in order to connect to

the LAN/wireless network

Infrastructure mode

In order to configure the network between the wireless host device and the printer, set the

printer to Soft AP Mode.

Soft AP mode

A P

Rev. 1.00 - 5 -

Wireless LAN Connection Manua

(2) Checking Network Setting

Self-test

While the printer is turned off, turn on the printer while pressing the feed button.

The printer setting values will then be printed.

Power

FEED

Rev. 1.00 - 6 -

Wireless LAN Connection Manua

3-1 Android Soft AP mode (default)

1) Select “Wi-Fi”. 2) Select the printer to connect

3) Select “CONNECT”. 4) Wi-Fi communication is available.

Rev. 1.00 - 7 -

Wireless LAN Connection Manua

3-2 iOS Soft AP mode (default)

1) Select “Wi-Fi”. 2) Wi-Fi ON and Select the printer to connect

3) Wi-Fi communication is available

Rev. 1.00 - 8 -

Wireless LAN Connection Manua

3-3 How to change infrastructure mode

1) Enter the IP address of the printer in the address bar, and the following login window will

pop up. Enter the ID and Password set for the printer, and then click [LOG IN] (Default

User Name: admin, Password: password)

2) Select “Wireless” to change Wireless LAN mode.

Rev. 1.00 - 9 -

Wireless LAN Connection Manua

3) Select “infrastructure”, and set SSID, WLAN Security Type.

4) Reboot the Printer.

Rev. 1.00 - 10 -

Wireless LAN Connection Manua

4. Factory Reset

This function changes the Wireless LAN settings of the printer to the initial factory settings.

Method

Select the wireless interface on the printer's LCD screen.

Wireless LAN Factory reset is available in WLAN> ON / OFF> Factory Reset

When the printer is turned off, the Wireless LAN setting is applied as the factory default

Factory Reset Values

System

Printer Name *Printer model

Printer Port Num 9100

User ID admin

User Password password

Enc / Auth Encryption None/Open

Network

Network Mode Soft AP mode

SSID PRINTER_{MAC address}

Inactivity time 10

IP Assignment Method Manual (DHCP server)

IP, Subnet, Gateway

IP : 192.168.1.1

Subnet : 255.255.255.0

Gateway : 192.168.1.2

Specification

Feature Implementation

Operation Mode Infrastructure, Soft AP, Ad-hoc, Wi-Fi Direct

Wireless Standard IEEE 802.11b/g/n, IEEE 802.11a/b/g/n

Range Up to 100m free space (Outdoor)

Security WEP64/128

WPA1/2 – PSK

Other manuals for PV3

Table of contents

SATO PV3 Instruction manual

Popular Barcode Reader manuals by other brands