Sartorius R 160 P User manual

Sartorius Research.

R 160 P

Electronic Semi-Microbalance

Installation and Operating Instructions

1 Power receptacle, fuse, 8Level indicator

voltage selector

9 ON/OFF key

2 Menu access switch

10 Print control (functions only if balance

3Interface has a built-in interface)

4Protective ring 11 Tare control

5Pan 12 CAL key

6Shield plate 13 Selector key

7Leveling foot 14 Weight display

Sartorius Research

R 160 P

With this Sartorius Semi-Microbalance you have acquired a

high-quality electronic weighing Instrument that will ease your

daily work load.

Before you operate your new balance, please read these Instal-

lation and operating instructions carefully.

Pursuant to the German Directive for the Implementation

of Regulations for Prevention of Accidents "Elektrische

Anlagen und Betriebsmittel (VBG 4)" [Electrical Installa-

tions and Equipment] of April 1986, it is hereby certified

that the equipment delivered, "Semi-Microbalance, model

R 160 P" is manufactured and tested in compliance with

the following DIN/VDE regulations

DIN IEC 348/VDE 041 1:

Safety requirements for electronic measuring apparatus

DIN IEC 380/VDE 0806:

Safety of electrically energized office machines

DIN IEC 601 /VDE 0750:

Safety of medical electrical equipment

When you use electrical equipment in installations and

under ambient conditions requiring higher safety Stan-

dards, you must comply with the provisions as specified

in the applicable regulations for installation in your coun-

try.

Contents

Page

Equipment Supplied 5

Installation Instructions 6

Startup 7

Operation 8

Weighing 10

Calibration 11

Balance Operating program 13

Troubleshooting Guide 16

Interface 17

Accessories (Options) 18

Specifications 19

Equipment Supplied

Do not miss out on the benefits of our full warranty.

Please complete the warranty card, indicating the date of instal-

lation, and return the card to your Sartorius dealer.

The equipment supplied includes the components pictured on

the left.

Save the packaging and the box for shipping your balance to

prevent any damage caused during transportation.

Installation

Instructions

Choose a suitable place to set up your balance. lt should not be

exposed to the following:

- heat radiation

- aggressive/corrosive substances

- vibrations

- drafts.

Your Sartorius balance will provide accurate readouts even

when it is exposed to unfavorable weighing conditions. You can

adapt it to your requirements simply by changing the menu

code settings of the balance operating program. For this pur-

pose, please refer to pages 13 -15.

After you have plugged your balance into a wall outlet, al-

low for at least 2 hours' warmup.

Important Note

Unplug the balance before you connect or disconnect peripher-

als.

Startup

Install components (6 - 4) in the weighing chamber.

The balance has been factory-set to 220 volts.

How to change the voltage setting:

Adjust the voltage selector (1) to your local line voltage rating.

Write the new voltage setting on the manufacturer's label lo-

cated on the rear panel of the balance. Whenever you change

the operating voltage to 100/120 V, make sure to exchange the

installed T 80 mA fuse (1) for the T 160 mA fuse that comes

with the balance.

The fuse (1) is plugged into the voltage selector located on the

rear panel of the balance.

100/120 V-T 160mA

220/240 V-T 80mA

At the point of use, plug the power cable into a properly in-

stalled wall outlet. lf you use a wall outlet that does not have a

protective grounding conductor, make sure to ground the bal-

ance.

Level the balance using the leveling feet (7) so that

the air bubble is centered within circle of the level

indicator (8).

Operation

The weight display shows the following special

Status messages for your information:

BUSY

The balance processor is still busy processing a function and

will not accept any other commands to perform functions at this

time.

STANDBY

The display has been turned off with the ON/OFF key (9) and

the balance is now in the ready-to-operate state so that it does

not require warmup.

POWER OFF

The balance has been disconnected from line power (power

failure or outage, reconnection to line power after the balance

has been unplugged).

CAL

The calibration function has been activated.

Press the ON/OFF key (9) to turn the display on or off. You can

also turn it on with the tare control (11).

After the balance is plugged into a wall outlet, the weight display

will go out whenever you switch off the balance. All other cir-

cuits will remain energized (indicated by STANDBY). This

means the balance is immediately ready to operate without re-

quiring warmup the next time you switch it on.

After the power is turned on, a test of all essential electronic

functions is run automatically. The self test ends with the read-

out 0.00000 g.

Now place your sample on the pan (5) to determine the weight.

Close the doors of the weighing chamber. Read off the weight

indicated in the display (14) as soon as the weight unit (in this

case "g") appears as the stability symbol.

lf you wish to use a Container or if the display does not indicate

0.00000 g, press the tare control to zero the display.

Weighing

The R 160 P has a second display range which you can easily

select at the touch of the soft key selector (13).

lf you select the second range, only four decirnal places

(instead offive) will be displayed.

Standard display range: 0.00000 g

Second display range: 0.0000 g

The balance will stabilize at a faster rate in the display range

with an accuracy of 4 decimal places - 100 µ g readability - than

in the one with five decirnal places -10 µ g readability.

This selector provides you with a readily accessible weighing-in

convenience feature so that you do not have to access the

menu to change the codes set in the balance operating

program.

This manual suits for next models

Table of contents

Other Sartorius Scale manuals

Sartorius

Sartorius Cubis MCE Series User manual

Sartorius

Sartorius BL150S User manual

Sartorius

Sartorius Entris II BCA Advanced Series User manual

Sartorius

Sartorius BL310 User manual

Sartorius

Sartorius Secura User manual

Sartorius

Sartorius WZB25-NC User manual

Sartorius

Sartorius PMA.Evolution User manual

Sartorius

Sartorius Cubis MCA Specification sheet

Sartorius

Sartorius PMA.Evolution User manual

Sartorius

Sartorius PMA.Evolution User manual

Sartorius

Sartorius CPA 12001S User manual

Sartorius

Sartorius 2406 User guide

Sartorius

Sartorius PMA.World User manual

Sartorius

Sartorius IS 300 IGG-H User manual

Sartorius

Sartorius PMA HD User manual

Sartorius

Sartorius Cubis Series User manual

Sartorius

Sartorius CUBIS MSU User manual

Sartorius

Sartorius PMA7500 User manual

Sartorius

Sartorius Secura 224-1S User manual

Sartorius

Sartorius mc1 User manual

Sartorius

Sartorius Combics CAW1P User manual

Sartorius

Sartorius 2405 User guide

Sartorius

Sartorius PMA.HD User manual

Sartorius

Sartorius QC34EDE-S User manual

Popular Scale manuals by other brands

AWS

AWS ZEO-50 user manual

Gima

Gima Glass Body Fat Analyzer Use and maintenance book

Seca

Seca 374 user manual

TEC

TEC TEC SL59 SERIES owner's manual

Axis

Axis B/E Series user manual

Alecto

Alecto ACW-40 user manual

Rice Lake

Rice Lake MSI-4260 IS Technical manual

IKA

IKA RCT basic safety control operating instructions

ADE

ADE M20011 operating manual

Duronic

Duronic KS3000 manual

Digi

Digi SM-720 Service manual

Cardinal

Cardinal CS Series Operation manual

Korona

Korona Kastella Instructions for use

A&D

A&D FC-50Ki instruction manual

BDA

BDA CAMARGUE installation guide

Tanita

Tanita HD-357 Instructions for use

Leifheit

Leifheit 03173 quick start guide

Lumme

Lumme LU-1340 user manual