Santec E-Series User manual

Installation Instruction

Deck Mount Hand Shower

E-SERIES COLLECTIONS

Please read the instructions completely before beginning the installation.

Allure Collection

ModelNumber:3356HK-TM Bravo Collection

Model Number: 6656BO-TM

Chadwick Collection

Model Number: 4356GL-TM

Britani Collection

Model Number: 4156BL-TM

Ebis Collection

Model Number: 3756HY-TM Element Collection

Model Number: 3756HY-TM

Rev 06/2016

The measurements shown are for reference only. Products and specifications shown are subject to change without notice.

www.santecfaucet.com | P: 310.542.0063 F: 310.542.5681

1/7

Flush both supply lines before installation, then shut off both supply lines.

Minimum hole size for the spout and handle trim is 1-1/4” and maximum of 1-1/2”

Lutti Collection

Model Number: 4856PT-TM Metra Collection

Model Number: 2456MD-TM

The measurements shown are for reference only. Products and specifications shown are subject to change without notice.

www.santecfaucet.com | P: 310.542.0063 F: 310.542.5681

2/7

HANDLE TRIM INSTALLATION

-Unscrew pre-assembled handle trim from the valve

body. Hot valve assembly “Red” to be mounted on

left. Cold valve assembly “Blue” to be mounted on right.

SPOUT TRIM INSTALLATION

- Remove the top lock nut and the fiber gasket from

the valve body.

- Apply a ring of silicone caulking around the handle hole

on deck top.

-Slip valve body up from below tub deck.

Place the top lock nut and the fiber gasket back onto the valve

body until the top surface of the lock nut is flush with the top surface

of the valve body.

- Secure the top lock nut in place before inserting the handle.

-Align handles with respect to the spout and tighten bottom lock

nut until secure.

- Connect the tee connector to the spout shank.

1- Remove the tee connector and spout mounting hardware from quick

connect shank being sure to leave on brass plate.

2- Apply a ring of silicone caulking around hole designated for spout.

- DO NOT USE PLUMBERS’ PUTTY, WHICH CAN DAMAGE FINISH.

3- From the top of the deck, slip the quick connect shank through the

assigned spout hole.

4- Secure the quick connect shank by putting the washer and lock nut

back on the shank. Tighten the lock nut firmly.

- From the top of the deck, slip the spout with the flange and flange

washer onto the quick connect shank top. Align the spout and tighten

the set screw with the Allen key provided.

3/7

HAND SHOWER INSTALLATION

1- Apply a ring of silicone caulking around the hole designated for the hand held shower.

Do not use plumber’s putty, which can damage finish.

- Remove the hardware from Base Flange. Slip the Base Flange through the appropriate

hole in deck. From underneath attach the Metal Washer and Brass Lock nut. Tighten

firmly to avoid leakage.

- From underneath the deck attach the larger side of the 57” hose to the Spout Diverter

valve. Slip the smaller end of the hose up through the base flange and connect to the

hand held shower. Tighten both ends firmly to avoid leakage.

SILICONE

The measurements shown are for reference only. Products and specifications shown are subject to change without notice.

www.santecfaucet.com | P: 310.542.0063 F: 310.542.5681

The measurements shown are for reference only. Products and specifications shown are subject to change without notice.

www.santecfaucet.com | P: 310.542.0063 F: 310.542.5681

PARTS DRAWING

4/7

* Please specify the finish when ordering the part.

# PART DESCRIPTION PART #

1 Flange HS-203

2 Adaptor Z-200-4

3 All-Thread Connector PM-Z13

4 Handheld Shower Z-200-5

5 Spray Modulator Z-200-6

6 Screw Z-200-3

7 Screw PM-181

8 Lock Washer PM-184

9 Valve Extension SA240

10 Teflon Washer (Small) PM-099

11 Teflon Washer PM-095

12 Bell PH2545

13 Lever PH2546

SPECIFICATION SHEETS

The measurements shown are for reference only. Products and specifications shown are subject to change without notice.

www.santecfaucet.com | P: 310.542.0063 F: 310.542.5681

5/7

Ø2

2 1/4"

10 1/4"

We recommend that all faucets, drains, etc., be gently wiped dry with a soft cloth after use to avoid water

spotting and water deposit build-up. A mild liquid hand soap may be used occasionally if desired. Use of a

non-abrasive carnauba wax will add protection to the finish and should be used if the faucets will not be dried

after use. For clear coated finishes, it is recommended to clean your product weekly with a soft moist cloth.

WARNING: Do not clean your SANTEC product with ammonia (Window cleaner), bleach, soap, acids,

abrasives, harsh polish, harsh cleaners, a coarse surfaced cloth, coarse sponge, or any type of scouring pad.

Doing so may ruin your faucet finish and/or void the warranty.

Thank you for making SANTEC a part of your lifestyle and luxury spa experience. Our products have been

created as works of enduring quality and sophisticated design.

Luxurious finishes need proper care and attention, so in order to understand how to properly clean your

distinctive luxury finish, please refer to the finish care information below:

Your SANTEC product can be identified in one of two categories: clear coated finishes or non-clear coated

finishes. Clear coated finishes are more scratch-sensitive and are more reactant to harsh cleaning chemicals

than non-clear coated finishes. Once you have identified the specific luxury finish of your SANTEC product,

please follow the important corresponding care instructions.

We recommend that all faucets, drains, etc., be gently wiped dry with a soft cloth after use to avoid water

spotting and water deposit build-up. A mild liquid hand soap may be used occasionally if desired. Use of a

non-abrasive carnauba wax is occasionally required and will add protection to the finish if the faucets will not

be dried after use.

FINISH CARE INFORMATION

CLEAR COATED FINISHES

NON-CLEAR COATED FINISHES

TO OBTAIN WARRANTY SERVICE

Please read ‘WHAT IS COVERED BY OUR WARRANTY’ and ‘EXCLUSIONS AND LIMITATIONS OF

WARRANTY’ sections to understand what is and what is not covered. Please have ready the proof of

purchase (original sales receipt), description of the problem, and carefully package the product or defective

part with postage prepaid. Then, please contact your local SANTEC Showroom or write to SANTEC Technical

Services.

The measurements shown are for reference only. Products and specifications shown are subject to change without notice.

www.santecfaucet.com | P: 310.542.0063 F: 310.542.5681

6/7

LIFETIME LIMITED WARRANTY

SANTEC is committed to enhancing your bathroom experience by creating luxury products that will provide

enduring satisfaction. Every effort has been made to satisfy the highest standards of design and production,

to create lasting peace of mind for our customers. We provide the following limited warranties on our products:

LENGTH OF WARRANTY & WHO IS COVERED BY OUR WARRANTY

This warranty extends to the original consumer purchaser only and extends for as long as the original

purchaser owns the product and the home in which the product is installed.

WHAT IS COVERED BY OUR WARRANTY

FINISHES: SANTEC Polished Chrome, Polished Nickel and Satin Nickel finishes carry a Lifetime Limited

warranty against manufacturing defects and tarnish to the original purchaser. All other finishes carry a ten

(10) year limited warranty against manufacturing defects and tarnish to the original puchaser only.

CARTRIDGES: Santec cartridges carry a lifetime limited warranty, with the exception of thermostatic and

pressure balanced cartridges, which carry a three (3) year limited warranty against manufacturing defects

to the original purchaser.

PARTS: Santec parts carry a 10-year limited warranty against manufacturing defects, to the original

purchaser.

EXCLUSIONS & LIMITATIONS OF WARRANTY

Damage due to negligence, accident, abuse, improper installation, or improper maintenance such as, but

not limited to: heat from soldering during installation, the use of plumber’s putty, damage from tools used

during installation, the use or exposure to chemicals or cleaning products either abrasive or non-abrasive,

or the use of any cleaning tool or product other than a soft, clean cloth. Reverse osmosis may also shorten

the life of the finish.

Changes in the finish or in the product due to normal wear or aging does not cover any products or parts

which have been altered or used in a manner not typical for the product.

Loss, damages, or expense, incidental or consequential whatsoever, originating from the purchase,

installation, use, repair, failure, or replacement of any SANTEC product or part, allowed by law.

This warranty does not cover:

Commercial and/or Industrial installations and use of the product.

This warranty does not include labor, travel charges, or any costs incurred for repair, removal, installation,

servicing, diagnosing, or handling of either defective or replacement parts.

SANTEC reserves the product components of the covered product will be repaired, refinished, or replaced

at the sole discretion of SANTEC. SANTEC reserves the right to examine any product claimed defective prior

to any warranty claim being accepted or processed, at its sole discretion. This warranty gives you specific

legal rights and you may have other rights which may vary from state to state.

The measurements shown are for reference only. Products and specifications shown are subject to change without notice.

www.santecfaucet.com | P: 310.542.0063 F: 310.542.5681

Damage or deterioration caused by environmental impacts.

7/7

Other manuals for E-Series

This manual suits for next models

Table of contents

Other Santec Plumbing Product manuals

Santec

Santec ATHENA 3450HO-TM User manual

Santec

Santec AVA User manual

Santec

Santec 7089SE User manual

Santec

Santec EBIS E Series User manual

Santec

Santec E-Series User manual

Santec

Santec TH-8010 User manual

Santec

Santec TH-8010 User manual

Santec

Santec Novo II 7831UL-TM User manual

Santec

Santec 9527KL-TM User manual

Santec

Santec CIRC CZ User manual

Santec

Santec LIZA 5166LZ User manual

Santec

Santec KARLIE 1870EP User manual

Santec

Santec Athena 3470HO User manual

Santec

Santec AVA Series User manual

Santec

Santec FLUID IMAGINATION CHADWICK 4320GL User manual

Santec

Santec Alexis 2370HA User manual

Santec

Santec E-Series User manual

Santec

Santec Widespread 9220ED User manual

Santec

Santec BAROSA 2455MC-TM User manual

Santec

Santec CIRC 3920CI User manual

Santec

Santec EDO 9229ED-TM User manual

Santec

Santec MONARCH CRYSTAL Series User manual

Santec

Santec Modena I 3555TD-TM User manual

Santec

Santec Designer Series User manual

Popular Plumbing Product manuals by other brands

Weka

Weka 506.2020.00E ASSEMBLY, USER AND MAINTENANCE INSTRUCTIONS

Kohler

Kohler K-6228 Installation and care guide

UBERHAUS DESIGN

UBERHAUS DESIGN 75175017 Operator's manual

American Standard

American Standard DetectLink 6072121 manual

Uponor

Uponor Contec TS Mounting instructions

Pfister

Pfister Selia 49-SL Quick installation guide

Fortis

Fortis VITRINA 6068700 quick start guide

Fortis

Fortis MILANO 78211JS installation instructions

Kohler

Kohler K-12183 Homeowner's guide

Maxxus

Maxxus MX-M206-01 instruction manual

Moen

Moen 5922 Series installation instructions

Viega

Viega Prevista Pure 8512 Instructions for use

Kohler

Kohler Centerset K-15240 Homeowner's guide

Viega

Viega Prevista Dry 8522.33 Instructions for use

Sanela

Sanela Lema SLP 59RB Instructions for use

Elkay

Elkay EDF15AC Installation, care & use manual

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Instructions for use/assembly instructions

baliv

baliv WT-140 manual