Sanipex KOY User manual

KOY & ZEPHYR

THERMOSTATIC SHOWER MIXER

www.sanipexgroup.com

IMPORTANT PLEASE READ

All products manufactured and supplied by

AGNODESIGN are fit for purpose as long

as they are Installed, used correctly, cleaned and receive regular maintenance in

accordance with these instructions ...

Remove all packaging and check the product for damage or missing parts before commencing

with the installation.

Any alterations made to this product and its components may infringe product certification,

infrin ge water regulations and invalidate the guarantee. The Installation must comply with all

local/national water supply authority regulations/bylaws and building and plumbing

regulations, therefore we strongly recommend that your product be installed by a reputable

qualified trade's person.

PRODUCT LIFECYCLE

"The product

ive

ycle/e is the collective stages that a product goes through from

its

conception

and design through to its ultimate disposal."

DISPOSAL GUIDANCE

The best way to ensure your Product has a long life is to follow the Care and Maintenance guides

set by the Manufacture after purchase. This document can be found at

www.bagnodesignlondon.com.

The life cycle of the product is

not

in correlation to the

product Guarantee; the standards the products are manufactured or certified to (e.g. CE &

WRAS) can exceed past the Guarantee duration. After the life cycle of the product is deemed

complete by the end-user please follow the below to dispose of the items correctly ...

Mixers (Shower Valves):

If the mixers are no longer accepted due to mechanical use or aesthetic style, these can be

dis posed of at a registered Local Authority waste recycling center where the individual

components can be sorted.

CLEANING CARE GUIDE



Rinse with water to remove the mild soap solution.

We recommend the product is dried using a soft cloth after

every use.

Never

use any abrasive or strong cleaning products containing,

bleaches, acids (hydrochloric, formic, phosphorus, chlorine or

acetic), strong detergents, limescale remover, alcohol or dyes

etc.

Never

use abrasive cleaning pads, wire wool or microfibre

cloths.

Never

use cleaning equipment that may have been pre-

used and contaminated with the above substances.

Never

apply the cleaning product directly onto the finished

surface.







(

INSTALLATION TYPES

Solid Wall Installation - Place the valve on the wall, level and mark the positions of the 2 fixing points,

drill the wall with the correct sized drill bit, install the wall plugs and screw to fasten the valve to the

wall.

Dry Wall Installation - For framed installations ensure that the timber/noggin is capable of securing and

holding the valve in position, make sure the valve is level and use screw to fasten the valve to the wall.

ONE OUTLET / 2 HANDLE — CONCEALED PART

Install the concealed part at a depth so that the

finished surface is between the Min/Max marking

above.

Apply the surrounding finishes, fit the faceplate onto the valve body, if necessary run a small bead of

silicone around the outer rim of the face plate.

Install the cold water supply from the right and

hot water supply from the left as shown per the

above (if possible pressure test.

Remove the protective cover caps before face plate installation

To fit handles please go to page 8 & 9

TWO OUTLET / 2 HANDLE — CONCEALED PART

Install the concealed part at a depth so that the

finished surface is between the Min/Max marking

above.

Install the cold water supply from the right and

hot water supply from the left as shown per the

above (if possible pressure test.

Apply the surrounding finishes, fit the faceplate onto the valve body, if necessary run a small bead of

silicone around the outer rim of the face plate.

Remove the protective cover caps before face plate installation

To fit handles please go to page 8 & 9

THREE OUTLET / 3 HANDLE — CONCEALED PART

Install the concealed part at a depth so that the

finished surface is between the Min/Max marking

above.

Apply the surrounding finishes, fit the faceplate onto the valve body, if necessary run a small bead of

silicone around the outer rim of the face plate.

Install the cold water supply from the right and

hot water supply from the left as shown per the

above (if possible pressure test.

Remove the protective cover caps before face plate installation

To fit handles please go to page 8 & 9

Top outlet to head shower*

Side outlet to hand shower*

Bottom outlet to bath spout or other*

DIVERTER HANDLE INSTALLATION & OPERATION

The diverter has 3 positions. Turn the spindle of the valve as far anti-clockwise until its stops, now

turn it back once, this will now be in the off position (1). Place the diverter handle on at the 12 o’clock

position. Tighten the grub screw from underneath until secure. Insert the screw cover.

The three-outlet mixer utilizes the one and two outlet methods, please follow the above:

Top valve two outlet

Bottom valve — one outlet

To operate turn the handy to the desired outlet. If three outlet mixer 2 functions/outlets can work

simultaneously.

ONE OUTLET

Turn the spindle of the valve as far anti-clockwise until its stops. Place the diverter handle on at the 12

o’clock position. Tighten the grub screw from underneath until secure. Insert the screw cover.

TWO OUTLET

THREE OUTLET

TEMPERATURE CONTROL HANDLE INSTALLATION & OPERATION — ALL MODELS

The Calibration ring is pre-installed and set at the 12 o’clock position at 38°C DO NOT REMOVE

Place the diverter handle in position. Tighten the grub screw from underneath until secure. Insert the

screw cover.

To test function, turn the handle clockwise, then

anti-clockwise, it should stop at the 12 o’clock

position, press the button to turn.

When turning the handle back clockwise, at the

point the button comes to the 12 o’clock position

a ‘click’ will sound and the button pop back up.

This manual suits for next models

Table of contents

Other Sanipex Plumbing Product manuals

Sanipex

Sanipex BAGNODESIGN BDM-MLI-522015-A Series User manual

Sanipex

Sanipex AQUAECO AQP-BTR-153-WH User manual

Sanipex

Sanipex BAGNODESIGN BDM-VIT-329-CP User manual

Sanipex

Sanipex BAGNODESIGN KOY BDM-KOY-410 Series User manual

Sanipex

Sanipex BAGNODESIGN AQP-ECO-D801 Series User manual

Sanipex

Sanipex AQUAECO CONRAD AQM-CND-410 Series User manual

Sanipex

Sanipex AQUAECO AQP-WBT-220-CP User manual

Sanipex

Sanipex Bagno Design Revolution User manual

Sanipex

Sanipex AQUAECO AQP-ANG-128 Series User manual

Sanipex

Sanipex AQUAECO AQE-EMB-K515-CP User manual

Sanipex

Sanipex AQUAECO AQP-ANG-138 Series User manual

Sanipex

Sanipex Bossini MANHATTAN I00570 User manual

Sanipex

Sanipex BAGNODESIGN BDM-MEZ-307-B Series User manual

Sanipex

Sanipex BAGNODESIGN BDM-MLI-305 Series User manual

Sanipex

Sanipex AQUAECO AQP-ANG-422 Series User manual

Sanipex

Sanipex BAGNODESIGN BDS-BIS-WMBASIN User manual

Sanipex

Sanipex AQUAECO AQM-CND-411-XX User manual

Sanipex

Sanipex BAGNODESIGN BDM-MLI-409 Series User manual

Sanipex

Sanipex AQUAECO CONRAD AQM-CND-514 Series User manual

Sanipex

Sanipex BAGNO DESIGN BDA-MLI-V002 Series User manual

Sanipex

Sanipex BAGNODESIGN BDM-VIT-410 Series User manual

Sanipex

Sanipex AQUAECO AQE-ECO-512R-XX User manual

Sanipex

Sanipex AQUAECO AQM-EX3-410-BS User manual

Sanipex

Sanipex BAGNODESIGN BDM-KOY-305 Series User manual

Popular Plumbing Product manuals by other brands

Weka

Weka 506.2020.00E ASSEMBLY, USER AND MAINTENANCE INSTRUCTIONS

Kohler

Kohler K-6228 Installation and care guide

UBERHAUS DESIGN

UBERHAUS DESIGN 75175017 Operator's manual

American Standard

American Standard DetectLink 6072121 manual

Uponor

Uponor Contec TS Mounting instructions

Pfister

Pfister Selia 49-SL Quick installation guide

Fortis

Fortis VITRINA 6068700 quick start guide

Fortis

Fortis MILANO 78211JS installation instructions

Kohler

Kohler K-12183 Homeowner's guide

Maxxus

Maxxus MX-M206-01 instruction manual

Moen

Moen 5922 Series installation instructions

Viega

Viega Prevista Pure 8512 Instructions for use

Kohler

Kohler Centerset K-15240 Homeowner's guide

Viega

Viega Prevista Dry 8522.33 Instructions for use

Sanela

Sanela Lema SLP 59RB Instructions for use

Elkay

Elkay EDF15AC Installation, care & use manual

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Instructions for use/assembly instructions

baliv

baliv WT-140 manual