Samsung ML-5000A User manual
LASER PRINTER
ML-5000A
Setup Guide
00-Cover&Contents 7/16/99 7:37 PM Page 1
Control Locations and Functions
Front View
4Set Up
Automatic Paper Feeder
Holds 150 sheets of paper.
Paper Guides
Adjust to the
width of paper.
Face-down Stacker
Holds printed documents.
If printed on plain paper,
a maximum of 100 sheets
can be held.
Stacker Extender
Supports paper stacked in the
paper output bin.
Face-up Stacker
Holds a single sheet of special media (transparency,
label, envelope, and heavy weight paper) with print
side facing up.
Operator Panel
Tray Extender
Supports paper stacked in the
automatic paper feeder.
Manual Paper Feeder
Used to feed a single sheet of paper.
01-Setup 7/20/99 9:25 AM Page 2
12 Set Up
2. Before loading the paper, flex the sheets back and forth to loosen
them, then fan them. Tap the edges on a table top to straighten
them. Doing this before you load paper helps prevent paper jams.
DonÕt load too much. This feeder holds up to 150 sheets.
3. Insert the paper in the paper feeder.
If the paper has a preferred print side, place the print side facing
you. If you use letterhead paper, load the paper with the letter-head
edge down and facing you.
Loading a Stack of Paper
For best results, use high quality 75g/m2 (20 lb) xerographic paper.
1. Pull the extender on the automatic paper feeder up, until it stops.
02-Printing 7/16/99 6:30 PM Page 2
13
Set Up
5. Pull up the extender on the face-down stacker. The face-down
stacker can hold up to 100 printed pages.
4. Adjust the paper guides to the width of the paper.
02-Printing 7/16/99 6:30 PM Page 3
14 Set Up
6. ML-5000A users may want to print a self test to check that the
printer is working properly. A self test shows current printer
configuration.
Make sure that the READY light is on. Press and hold the button
for about 3 seconds. All the indicators blink. Release the button
when each indicator starts to blink in turn. Wait until a self test
page prints.
ERROR
PAPER
READY
02-Printing 7/16/99 6:30 PM Page 4
15
Set Up
Installing Printer Driver
Windows 95/98/NT4.0 Installation
1. Turn on the computer and start Windows.
If Windows 95/98 recognizes the new printer,go to the section
ÒWindows 95/98 Plug and PlayÓ on page 16.
2.Insert the setup CD-ROM into your CD-ROM drive.
If Windows does not automatically run the CD-ROM,go to the
sectionÓIf Windows Does Not Run the CD-ROMÓ on page 16.
3.Click on the icon ÒPrinter Set-upÓ to install the printer drivers.
4.Click the Item you want to install.
5.Follow the instructions on the screen.
Note : WinNT and WinNTRCP item is supported under Windows NT4.0.
02-Printing 7/16/99 6:30 PM Page 5
16 Set Up
Windows 95/98 Plug and Play
1.At the ÔNew Hardware FoundÕ dialog box,click on the OK button.
2.Insert the setup CD-ROM into your CD-ROM drive.
3.Follow the instructions on the screen.
If Windows Does Not Run the CD-ROM
1.Select RUN from the Start menu.
2.Type e:\print32.exe on the command line(Ôe:\Õ is CD-ROM drive),then
click OK.
3.Follow the instructions on the screen.
Windows 3.1x Installation
1.Insert the CD-ROM disk into your CD-ROM drive.
2.From the Program Manager window,double-click Main, and File
Manager
3.From the File Manager window,select your CD-ROM drive, execute
print16.exe.
4.Click on the icon ÒPrinter Set-upÓ to install the printer drivers.
5.Follow the instructions on the screen.
02-Printing 7/16/99 6:30 PM Page 6
17
Set Up
Installing DOSRCP Utility
For DOS Users
DOS users should install the Remote Control Panel utility to change
print settings.
1. Insert the setup CD-ROM into your CD-ROM drive.
2. At the DOS prompt, type in:
c:\>XCOPY e:\Driver\English\DosUtil\*.* c:\DOSUTIL ↵
(Ôe:\Õ is CD-ROM drive)
<F=File, D=directory>?
3. Specify directory:
<F=File, D=directory>? D↵
4. To execute batch file, type in:
c:\DOSUTIL\ 5000A.BAT
02-Printing 7/16/99 6:30 PM Page 7
18 Set Up
Uninstall Printer Driver
In Windows 95/98
1. From the Start menu, select Settings, then Printers.
2. In the Printers windows, select Samsung ML-5000A PCL5e.
3. From the File menu, select Delete.
In Windows 3.x
1. Double-click the Control Panel icon within the Main program
group.
2. Double-click the Printers icon.
3. Select Samsung ML-5000A PLC5e from the Installed Printers
list, then click the Remove button.
02-Printing 7/16/99 6:30 PM Page 8
19
Set Up
Printing a Document
This procedure describes the general steps required for printing from
various Windows applications. The exact steps for printing a
document may vary depending on the application program you are
using. Refer to your software applicationÕs documentation for the
exact printing procedure.
1. Start the program you are using to create the document, and open
the document you want to print.
2. Choose Print or Print Setup from the File menu.
3. Make sure the correct printer is selected as your default printer.
4. Click on Properties, Setup or Options if you want to make any
adjustments as appropriate for printing your document.
5. Select OK to close the Properties dialog box.
6. After making any necessary changes to the printing parameters,
select OK to start the print job.
02-Printing 7/16/99 6:30 PM Page 9
Other manuals for ML-5000A
2
This manual suits for next models
1
Table of contents
Other Samsung Printer manuals
Samsung
Samsung ML-6050 User manual
Samsung
Samsung Bixolon SRP-270 User manual
Samsung
Samsung ML-1610 - B/W Laser Printer User manual
Samsung
Samsung ML-651x series User manual
Samsung
Samsung ML-2150 User manual
Samsung
Samsung ML-1865W User manual
Samsung
Samsung 2 COLOR THERMAL PRINTER SRP-275 User manual
Samsung
Samsung CLP 500 User manual
Samsung
Samsung M262x Series User manual
Samsung
Samsung CLP-620ND User manual
Samsung
Samsung CPL-310N User manual
Samsung
Samsung ML-2525 User manual
Samsung
Samsung M262x Series User manual
Samsung
Samsung ML-7300N User manual
Samsung
Samsung ML 1740 - B/W Laser Printer User manual
Samsung
Samsung CLP-680ND: CLP-775ND Operator's manual
Samsung
Samsung CLX-3160 Series User manual
Samsung
Samsung SL-M4080FX User manual
Samsung
Samsung ML-2010/XAZ User manual
Samsung
Samsung ML-2010 - B/W Laser Printer User manual
