Samsung DV665J Series User manual

the possibilities

Thank you for purchasing this Samsung Product.

To receive more complete service.

please register your product at

www.samsung.com/global/register

at Aro

1. Delay Start

You can delay the dryer's start-up time for up to 24 hours. The Delay Start feature will allow

you to dry your clothes at a time that is convenient for you.

2. Freshen-up Program

Samsung's Freshen-up program tumble-dries garments in cool air set at a time of your

choice, for up to 50 minutes. This program makes it easy to freshen-up clothes that only

require a little airing out.

3. Sensor Dry & Fuzzy Logic Control

Both technologies bring you outstanding economic benefits as well as excellent drying

performance. The Fuzzy Logic Control determines the dryness and gentleness needed

for your laundry and sets the appropriate drying time/cycle. The Sensor dry function

continuously measures the temperature in the inner section of the dryer to provide excellent

drying performance.

4. Various Drying Cycles & Fuzzy Logic Algorithm

Simply turn the Jog Dial to select one of the 11 automatic drying cycles, including normal,

heavy duty and towels. You can also choose to use the Fuzzy Logic Algorithm to measure

the degree of dampness and automatically set the drying time. Precision drying has never

been easier than with Samsung.

5. Wrinkle-Release

Our Wrinkle-Release program tumble dries garments in warm air for 10 minutes, then cool

air for an additional 10 minutes. You can use the Wrinkle-Release program to smooth the

wrinkles of garments that have been stored away.

6. Stacking

Samsung Washers and Dryers can be stacked to maximize usable space, using an optional

Stacking Kit.

2 Features

afotv 'nstrLAot©ns

Congratulations on the purchase of your new Samsung Dryer. This manual

contains valuable information on the installation, use, and care of your appliance.

Please take the time to read this manual to take fuji advantage of your dryer's

many benefits and features.

WHAT YOU NEED TO KNOW ABOUT SAFETY INSTRUCTIONS

Warnings and Important Safety Instructions in this manual do not cover all possible conditions and

situations that may occur. It is your responsibility to use common sense, caution, and care when installing,

maintaining, or operating your dryer.

Always contact your manufacturer about problems or conditions you do not understand.

IMPORTANT SAFETY SYMBOLS AND PRECAUTIONS

A Hazards or unsafe practices that may result in severe personal injury or

death.

WARNING

Hazards or unsafe practices that may result in minor personal injury or

property damage.

CAUTION

Z_ Follow the information in this manual to minimize the risk of fire or explosion or

to prevent property damage, personal injury, or death.

CAUTION Do not store or use gasoline or other flammable vapors and liquids near this or

any other appliance.

Do NOT attempt.

Do NOT disassemble.

Do NOT touch.

Follow directions explicity.

Unplug the power plug from the wall socket.

Make sure the machine is grounded to prevent electric shock.

Call the service center for help.

Safety instructions 3

_Read all instructions before using the appliance.

_To

WARNING •

reduce the risk of fire or explosion:

Do not dry items that have been previously cleaned, washed, soaked, or spotted with

gasoline, dry cleaning solvents, or other flammable or explosive substances. They

emit vapors that could ignite or explode. Any material that has been in contact with a

cleaning solvent or flammable liquids or solids should not be placed in the dryer until all

traces of these flammable liquids or solids and their fumes have been removed.

There are many highly flammable items used in homes, such as acetone, denatured

alcohol, gasoline, kerosene, some liquid household cleaners, some spot removers,

turpentine, waxes, and wax removers

• Items containing foam rubber (may be labeled latex foam) or similarly textured rubber-

like materials must not be dried on a heat setting. Heated foam rubber materials can,

under certain circumstances, produce fire by spontaneous combustion.

Do not allow children or pets to play on, in, or in front of the appliance. Close supervision is

necessary when the appliance is used near children and pets.

Before discarding or removing your dryer from service, remove the door to the drying

compartment to prevent children or animals from becoming trapped inside.

Do not reach into the appliance when the drum is moving.

Do not install or store this appliance where it will be exposed to the weather.

Do not tamper with controls.

Do not repair, replace, or attempt to service any part of the appliance unless specifically

recommended in the user-repair instructions. You must also have the skills necessary to

service this appliance.

Do not use fabric softeners or products to eliminate static unless recommended for dryer

use by the manufacturer of the fabric softener or product.

Clean the lint screen before or after each load.

Keep the area around the exhaust opening and surrounding areas free from lint, dust, and

dirt.

The interior of the dryer and exhaust duct should be cleaned periodically by qualified service

personnel.

This appliance must be properly grounded. Never plug the power cord into a receptacle

that is not grounded adequately and in accordance with local and national codes. See

installation instructions for grounding this appliance.

Do not sit on top of the dryer.

Because of continuing product improvements, Samsung reserves the right to change

specifications without notice. For complete details, see the Installation Instructions

packed with your product before selecting cabinetry, making cutouts, or beginning

installation.

/_ Ensure pockets are free from small irregularly shaped hard objects, foreign material, etc. ie.

....... coins, knives, pins, etc. These objects could damage your dryer.

Do not wash clothing with large buckles, buttons, or other heavy metal or solid things.

4 Safety instructions

Install and use in accordance with the manufacturer's instructions.

Do not place items inyour dryer that have been spotted or soaked with vegetable oil or

cooking oil. Even after being washed, these items may contain significant amounts of these

oils.

The residual oil can ignite spontaneously. The potential for spontaneous combustion

increases when the items containing vegetable oil or cooking oil are exposed to heat. Heat

sources such as your dryer can warm these items, allowing an oxidation reaction in the

oil to occur. Oxidation creates heat. Ifthis heat cannot escape, the items can become hot

enough to catch fire. Piling, stacking, or storing these kinds of items may prevent heat from

escaping and can create a fire hazard.

All washed and unwashed fabrics that contain vegetable oil or cooking oil can be

dangerous. Washing these items in hot water with extra detergent will reduce, but not

eliminate, the hazard. Always use the Cool Down cycle for these items to reduce their

temperature. Never remove these items from the dryer hot or interrupt the drying cycle until

the items have run through the Cool Down cycle. Never pile or stack these items when they

are hot.

Safety instructions 5

content

INSTALLING YOUR DRYER

OPERATING INSTRUCTIONS, TIPS

CARE AND CLEANING

TROUBLESHOOTING

7 Tools needed for installation

7 See Exhaust Requirements

8 Ducting requirements

8 Exhaust length calculation

9 Exhaust directions

9 Exhaust duct locating dimensions

9 Important to installer

10 Location considerations

10 Alcove or closet installation

10 Exhausting

11 Electrical requirements

11 Grounding

12 Electrical connections

12 Replacement parts and accessories

13 Installation

14 Final installation checklist

15 Dryer Exhaust Tips

16 Door Reversal

17 Overview of the control panel

18 How To Operate Your Dryer

18 Polyester Knits & Permanent Press Drying Tips

18 Loading Clothes

18 Drying Times

19 Cycle selecting guide

19 Cycle Chart

20 Clean the lint filter

20 Load the dryer properly

20 Getting started

21 Clean Filter

21 Control Panel

21 Stainless Steel Tumbler

21 Dryer Exterior

21 Dryer Exhaust

21 Inside the dryer cabinet

22 Questions? Use this problem solver

22 Information Codes

APPENDIX

.....

23 Fabric Care Chart

24 Protecting The Environment

24 Specifications

TOOLS NEEDED FOR INSTALLATION

Hire a professional to install this dryer properly. If there is a service call performed as a result of poor setup,

adjustment, and connection, it is considered the responsibility of the installer. If you install the dryer you are

responsible.

Make sure you have everything necessary for proper installation.

1, A GROUNDED ELECTRICAL OUTLET is required. See Electrical Requirements on page 11.

2, A POWER CORD for electric dryers (except Canada).

3, EXHAUST SYSTEM - must be rigid metal or flexible stiff-walled metal exhaust ducting. See exhaust

requirements on page 8.

SEE EXHAUST REQUIREMENTS

Control panel

Door ,

Level

Pliers

Phillips Screwdriver

Cutting knife

Duct tape

Nut drivers

Crescent spanner

Hnstaling your dryer 7

n ta ng yo ArctrTer

DUCTING REQUIREMENTS

• Use a 4-inch (10.2 cm) diameter rigid aluminum or rigid galvanized steel duct.

Do not use a smaller duct.

Ducts larger than 4 inches (10.2 cm) in diameter can result in increased lint accumulation.

Lint accumulation should be cleaned regularly.

Ifa flexible metal duct must be used, use the type with a stiff sheet metal wall. Do not use a flexible duct

with a thin foil wall. Serious blockage can result if the flexible metal duct is bent too sharply.

Never install any type of flexible duct in walls, ceilings, or other concealed spaces.

Keep the exhaust duct as straight and short as possible.

Secure joints with duct tape. Do not use screws.

• DO NOT EXHAUST DRYER INTO ANY WALL, CEILING, CRAWL SPACE, OR CONCEALED SPACE OF

A BUILDING, GAS VENT, OR ANY OTHER COMMON DUCT OR CHIMNEY.

THIS COULD CREATE A FIRE HAZARD FROM LINT EXPELLED BY THE DRYER.

,, Plasticflexibleduct can kink, sag, be punctured, reduce airflow, extend dryingtimes,and affectdryer operation.

,, Exhaust systems longer than recommended can extend drying times, affect machine operation, and

may collect lint.

,, The exhaust duct should end with an exhaust hood with a swing-out damper to prevent back drafts and

entry of wildlife. Never use an exhaust hood with a magnetic damper.

,, The hood should have at least 12 inches (30.5 cm) of clearance between the bottom of the hood and

the ground or other obstruction. The hood opening should point down.

,, Never install a screen over the exhaust outlet.

,, To avoid lint buildup, do not exhaustthe dryerdirectly intoa window well. Do not exhaustunder a house or porch.

,, Ifexhaust ductwork must run through an unheated area, the duct should be insulated and slope slightly

down towards the exhaust hood to reduce condensation and lint buildup.

,, Inspectand cleanthe interiorof the exhaust system at leastonce ayear.Unplug the powercord beforecleaning.

,, Check frequently to be sure the exhaust hood damper opens and closes freely.

,, Check once per month, and clean at least one time per year. Note: If clothes are not getting dry, then

check ducting for obstructions.

EXHAUST LENGTH CALCULATION

Table 1 RECOMMENDED MAXIMUM LENGTH

No. of 90° elbows

Weather Hood Type

only for short run installations

_4" (10.16 cm) _21/2" (6.35 cm)

I Metallic Flexible_ i Metallic Flexible_

14 m (46 ft.) 9 m (30 ft.) 11 m (37 ft.) 7 m (24 ft.)

11 m (38 ft.) 7.5 m (25 ft.) 9 m (30 ft.) 6 m (20 ft.)

9 m (31 ft.) 6 m (20 ft.) 6.5 m (22 ft.) 4 m (14 ft.)

7 m (24 ft.) 5 m (16 ft.) 4.5 m (15 ft.) 3 m (10 ft.)

* Do not use non-metallic flexible duct.

8 Instaling your dryer

If the new dryer is installed into an existing exhaust system you must make sure:

+ The exhaust system meets all local, state, and national codes.

+ That a flexible plastic duct is not used.

+ To Inspect and clean all lint buildup from inside the existing duct.

+ The duct is not kinked or crushed.

+ The exhaust hood damper opens and closes freely.

The static pressure in any exhaust system must not exceed 0.83 inches of water column, or

be less than 0. This can be measured with the dryer running with a manometer at the point

where the exhaust duct connects to the dryer. A no-heat setting should be used. The dryer

tumbler should be empty and the lint filter clean.

EXHAUST DIRECTIONS

All dryers shipped from the factory are set up for rear exhausting. However

exhausting can be on the right, left or bottom of the dryer.

+ Remove the access panel at back of dryer to gain access to the internal ducts,

+ Disconnect the duct exhaust from the blower housing,

+ Remove the desired knockout plate (either right or left side),

+ Attach a 90 ° elbow duct to the blower housing and facing desired opening,

+ Reinstall the rear access panel,

Same as :__

other side

3-3/4"(9.5cm)

_/8"(11 cm) -o

._5-7/8"(15cm) -3/4"(9.5cm)

13-1/2"(34cm) +l

EXHAUST DUCT LOCATING DIMENSIONS

_ Non-metallic ducts must never be used inside the dryer cabinet.

WARNING

SPECIAL ACCESSORY

Stacking kit (Model no:SK-2A)

You can obtain the stacking kit from your retailer. With this kit

you can combine your Samsung dryer with a Samsung washing

machine in a washing and drying column. The appliances are

stacked in a space-economizing manner in this arrangement, the

washing machine on the bottom and the dryer on the top!

IMPORTANT TO INSTALLER

Please read the following instructions carefully before installing the dryer. These instructions should be kept

for future reference.

/_ REMOVE THE DOOR FROM ALL DISCARDED APPLIANCES TO AVOID THE DANGER OF A CHILD

....... SUFFOCATING.

hsta+ing your dryer 9

n ta ncj7o ArdrTer

LOCATION CONSIDERATIONS

The dryer should be located where there is enough space in front for loading the dryer, and enough space

behind for the exhaust system. This dryer is factory-ready for rear exhaust. To exhaust out the bottom or

the left, inquire at the installer. It's important to make sure the room has enough fresh air. The dryer must be

located where there is no air-flow obstruction.

THE DRYER MUST NOT BE INSTALLED OR STORED IN AN AREA WHERE IT WILL BE EXPOSED TO

WATER AND/OR WEATHER. THE DRYER AREA ISTO BE KEPT CLEAR OF COMBUSTIBLE MATERIALS,

GASOLINE, AND OTHER FLAMMABLE VAPORS AND LIQUIDS. A DRYER PRODUCES COMBUSTIBLE

LINT.THE AREA AROUND THE DRYER SHOULD BE KEPT LINT-FREE.

ALCOVE OR CLOSET INSTALLATION

_The dryer must be exhausted to the outside to reduce the risk of fire when installed in an alcove or

wAR,,,Gcloset.

• No other fuel-burning appliance should be installed in the same closet as the dryer.

WARNING: To reduce the risk of fire, this dryer MUST BE EXHAUSTED TO THE OUTDOORS.

See EXHAUST INFORMATION section.

Minimum clearances between the dryer and adjacent walls or other surfaces are:

2" in front, 17" on top, 1" on either side, and 2.375" in the back.

The closet front must have two unobstructed air openings for a combined minimum total area of 72 in2

with 3" minimum clearance on the top and bottom. A Iouvered door with equivalent space clearance is

acceptable.

EXHAUSTING

Exhausting the dryer to the outside will prevent large amounts of lint and moisture from being blown into the

room.

In the United States:

All dryers must be exhausted to the outside.

Only a rigid or flexible metal duct should be used for exhausting.

In Canada:

All dryers must be exhausted to the outside.

z_The dryer must be exhausted to the outside to reduce the risk of fire when installed in an

wAR,,.Galcove or closet.

NEVER USE A PLASTIC OR NON-METAL FLEXIBLE DUCT.

Ifyour existing ductwork is plastic, non-metal, or combustible, replace it with metal.

Use only a metal exhaust duct that is non-flammable to ensure containment of exhaust air,

heat, and lint.

10 Hnstaling your dryer

Other manuals for DV665J Series

Table of contents

Languages:

Other Samsung Dryer manuals

Samsung

Samsung DVE22N6850W User manual

Samsung

Samsung DV203AGW User guide

Samsung

Samsung DVG50M7450W Series User manual

Samsung

Samsung DV431AEP/XAA Manual

Samsung

Samsung DV210AGW User manual

Samsung

Samsung DV203 SERIES User manual

Samsung

Samsung DVE45M5500 Series User manual

Samsung

Samsung DVEG50M7450 SERIES User manual

Samsung

Samsung DV337AEG User guide

Samsung

Samsung FlexDry DV 55M9600 Series User manual

Samsung

Samsung DV338 series User manual

Samsung

Samsung DVG45R6100W User manual

Samsung

Samsung DV9*N82 series User manual

Samsung

Samsung DV56H9000G Series Manual

Samsung

Samsung DVG52M7750V User manual

Samsung

Samsung DV484ETHAWR/A1-0001 User manual

Samsung

Samsung DVE55A7700 Series User manual

Samsung

Samsung DVE50A8500V User manual

Samsung

Samsung DV435ETGJRA/A1 Manual

Samsung

Samsung DV431AEP User manual

Samsung

Samsung DV5006 User manual

Samsung

Samsung DV50F9A6E(G)* User manual

Samsung

Samsung DVE45T3400 Series User manual

Samsung

Samsung DVE45T6005 Series User manual

Popular Dryer manuals by other brands

Bosch

Bosch WTA79200GB Installation and operating instructions

Amana

Amana W10233410A Use and care guide

Miele

Miele TWH 780 WP operating instructions

Asko

Asko T760 user guide

Alliance Laundry Systems

Alliance Laundry Systems 25 Series Original instructions

Bosch

Bosch Logixx 10 WTB76556GB Instruction manual and installation instructions

STIEBEL ELTRON

STIEBEL ELTRON Ultronic S Operation and installation

Electrolux

Electrolux EW2H328R2 user manual

Beko

Beko DS8433RX1M user manual

Dawlance

Dawlance Spinner DS 6000 C owner's manual

Electrolux

Electrolux TP5080TW user manual

AEG

AEG TR838P4OB user manual

Indesit

Indesit IDV 75 instruction manual

Infiniton

Infiniton SD-DG85C manual

BOMANN

BOMANN WT 5019 instruction manual

Alliance Laundry Systems

Alliance Laundry Systems TMB795C Installation

Asko

Asko T793C operating instructions

Kenmore

Kenmore 8041 - 5.8 cu. Ft. Capacity Electric Dryer installation instructions