Robustel GoRugged R2000 User manual

Robustel GoRugged R2000 Dual Quick Guide

RT_QG_R2000 Dual_v.1.0.2 11.11.2016 1/21

Confidential

Installation and Configuration

Quick Guide

R2000 Dual--

Dual Module Industrial Cellular VPN Router

Package List

Before installing the R2000 Dual router, verify the kit contents as following:

Robustel R2000 Dual router

Power terminal block

Document and software CD

Optional Accessories

AC/DC power supply adapter, POE power supply adapter

35mm DIN rail mounting kit or wall mounting kit

SMA cellular antenna (HSPA+/LTE)

RP-SMA Wi-Fi antenna (stubby or magnetic)

Notify your sales representative if any of the above items is missing or damaged.

Preparation before Testing

R2000 Dual router x1, PC x1, SIM card x1, Ethernet cable x1, SMA antenna x2, power supplies with terminal block x1

(35mm DIN rail mounting kit x1, M3*6 cross recessed countersunk head screw x3; or wall mounting kit x2, M2.5*4

cross recessed countersunk head screw x4, M3 drywall screw x2)

Robustel GoRugged R2000 Dual Quick Guide

RT_QG_R2000 Dual_v.1.0.2 11.11.2016 2/21

Confidential

Environment Requirements

Power input: 9 to 48 VDC

Power consumption: 100 mA @ 12 V in idle state, 800 mA (peak) @ 12 V in communication state

Operating temperature: -40 to +70°C

Relative humidity: 5 to 95% RH

Robustel GoRugged R2000 Dual Quick Guide

RT_QG_R2000 Dual_v.1.0.2 11.11.2016 3/21

Confidential

Chapter 1 Hardware Introduction

1.1 Overview

Robustel GoRugged R2000 Dual Quick Guide

RT_QG_R2000 Dual_v.1.0.2 11.11.2016 4/21

Confidential

1.2 Dimension

1.3 LEDs

Name

Color

State

Description

RUN

Green

On, 1/2 sec blink

Router is ready.

On, 1 sec blink

Router is booting.

Off

Router is powered off.

PPP

Green

LED 1 is on

SIM1 PPP connection is working.

LED 2 is on

SIM2 PPP connection is working.

USR

Green

OpenVPN: OpenVPN is connected.

IPSec: IPSec is connected.

Wi-Fi: Wi-Fi is connected.

Off

OpenVPN: OpenVPN is disconnected.

IPSec: IPSec is disconnected.

Wi-Fi: Wi-Fi is disconnected.

NET

(LED 1 represents SIM 1,

Green

On, blinking green

Cannot connect to the best network.

E.g. When R2000 Dual uses the 4G SIM card but

Robustel GoRugged R2000 Dual Quick Guide

RT_QG_R2000 Dual_v.1.0.2 11.11.2016 5/21

Confidential

1.4 Reset Button

1.5 Ethernet Port

R2000 Dual router has five Ethernet ports, Eth0 is WAN port and Eth1~Eth4 are LAN ports. Four LAN ports support

POE function. Every Ethernet port has two LED indicators, and each indicator has three states. The yellow one is Link

Indicator and the green one doesn’t mean anything. For details see the table below:

Indicator

State

Description

Link Indicator

Connection is working

On, blinking

Data is being transmitted

Off

Connection is not working

LED2 represents SIM 2)

cannot connect to the 4G network, the NET LED

will always blink. So does 3G and 2G network.

On, solid green

Connect to the best network.

E.g. When R2000 Dual uses the 4G SIM card and

connects to the 4G network, the NET LED will on.

So does 3G and 2G network.

Off

Cannot access to any network.

Signal Strength

(Light 1 represents SIM 1,

light 2 represents SIM 2)

Green

All LEDs are on

Signal level: 21-31 (Optimum signal level)

Green

Two LEDs are on

Signal level: 11-20 (Average signal level)

Green

Only one LED is on

Signal level: 1-10 (Abnormal signal level)

When the network is disconnected, those three signal LEDs are designed as a

binary combination code to indicate a series of error report.

On: 1 Off: 0

001 AT command failed

010 no SIM card detected

011 it need to enter the PIN code

100 it need to enter the PUK code

101 registration failed

110 something wrong happened in the module

Function

Operation

Reboot

Press the button for at least 2~7 seconds under the operating status.

Restore to factory

default settings

Wait for 5 seconds after powering up the router; press the RST button by a small

non-conductive stick with a blunt end until all twelve LEDs blinking one by one; and

release the button within 5 seconds; then the router will be restored to factory default

settings.

Robustel GoRugged R2000 Dual Quick Guide

RT_QG_R2000 Dual_v.1.0.2 11.11.2016 6/21

Confidential

Chapter 2 Hardware Installation

2.1 Install the SIM Card

Remove the slot cover

1. Make sure the router is powered off.

2. To remove the slot cover, loosen the screws associated with the cover by using a screwdriver and then find the

SIM card slots.

Insert the SIM Card

3. To insert the SIM card, press the card with fingers until snap on and then tighten the screws associated with the

cover by using a screwdriver.

Remove the SIM Card

4. Make sure the router is powered off.

5. To remove the SIM card, press the card with fingers until pop out and then take out the SIM card.

Note:

1. Recommended torque for inserting is 0.5N.m, and the maximum allowed is 0.7N.m.

2. Use the specific M2M SIM card when the device is working in extreme temperature (temperature exceeding

0-40℃), because the regular SIM card for long-time working in harsh environment (temperature exceeding

0-40℃) will be disconnected frequently.

3. Do not forget to twist the cover tightly to avoid being stolen.

4. Do not touch the metal of the SIM card surface in case information in the card will lost or be destroyed.

5. Do not bend or scratch the SIM card.

6. Keep the SIM card away from electricity and magnetism.

7. Make sure router is powered OFF before inserting or removing the SIM card.

Robustel GoRugged R2000 Dual Quick Guide

RT_QG_R2000 Dual_v.1.0.2 11.11.2016 7/21

Confidential

2.2 Connect the External Antenna (SMA Type)

Connect the SMA external antenna connector to the router’s antenna interface and twist tightly. Make sure the

antenna is within the correct frequency range provided by the operator and with 50 Ohm impedance.

Note: Recommended torque for mounting is 0.35N.m.

2.3 POE Connection

R2000 Dual supports for POE function (Voltage Range: 48 to 57 VDC) , which can electrify the network terminal

devices such as IP camera and other WLAN AP etc. See figure below for more details:

2.4 Ground the Router

Router grounding helps prevent the effects of noise due to electromagnetic interference (EMI). Connect the router to

the site ground wire by the ground screw before powering on.

Note: This product is appropriate to be mounted on a sound grounded device surface, such as a metal panel.

Robustel GoRugged R2000 Dual Quick Guide

RT_QG_R2000 Dual_v.1.0.2 11.11.2016 8/21

Confidential

2.5 Mount the Router

The R2000 Dual router supports for horizontal surface placement, DIN rail mounting and wall mounting.

Two methods for mounting the router

1. Wall mounting:

Use 4 pcs of M2.5*4 cross recessed countersunk head screws to fix the router on the two wall mounting kits,

and then use 2 pcs of M3 drywall screws to mount the router associated with the wall mounting kit on the wall.

Note: Recommended torque for mounting is 0.5N.m and the maximum allowed is 0.7N.m.

2. DIN rail mounting:

Use 3 pcs of M3*6 cross recessed countersunk head screws to fix the router on the DIN rail, and then hang the

DIN rail on the bracket. It is necessary to choose the standard bracket.

Note: Recommended torque for mounting is 1.0N.m, and the maximum allowed is 1.2N.m.

When mounting the kit onto the DIN rail, make sure that its metal springs are orientated towards the top

of the DIN rail.

Robustel GoRugged R2000 Dual Quick Guide

RT_QG_R2000 Dual_v.1.0.2 11.11.2016 9/21

Confidential

2.6 Connect the Router to the PC

Connect the router’s Eth1/Eth2/Eth3/Eth4 to a PC via a standard crossed network cable.

2.7 Power Supply

R2000 Dual router supports reverse polarity protection, but always refers to the figure above to connect the power

adapter correctly. There are two cables associated with the power adapter. Following to the color of the head,

connect the cable marked red to the positive pole through a terminal block, and connect the yellow one to the

negative in the same way.

Note: The range of power voltage is 9 to 48 VDC.

Robustel GoRugged R2000 Dual Quick Guide

RT_QG_R2000 Dual_v.1.0.2 11.11.2016 10/21

Confidential

Chapter 3 Initial Configuration

The router can be configured through your web browser including IE 8.0 or above, Chrome and Firefox, etc. And the

supported operating systems are: Linux, Mac OS, Windows 98/NT/2000/XP/Me/Vista/7/8, etc. There are various

ways to connect to the router, either through an external repeater/hub or to PC directly. However, make sure that

your PC has an Ethernet interface properly installed prior to connecting the router. You must configure your PC to

obtain an IP address through a DHCP server or a fixed IP address that must be in the same subnet as the router. If you

encounter any problems accessing the router web interface it is advisable to uninstall your firewall program on your

PC, as this tends to cause problems accessing the IP address of the router.

3.1 Configure the PC in Window 7

There are two methods to configure the IP address on PC, one is to obtain IP address automatically from DHCP server,

and another is to configure a static IP address manually within the same subnet of R2000 Dual router.

The configuration for Windows system is similar.

1. Go to Start > Control Panel > Network and Sharing Center, and then double-click Local Area Connection.

Other manuals for GoRugged R2000

Table of contents

Other Robustel Network Router manuals

Robustel

Robustel GoRugged R3000-3P-GPS User manual

Robustel

Robustel R5010 User manual

Robustel

Robustel GoRugged R3000 Lite User manual

Robustel

Robustel GoRugged R3000 Lite User manual

Robustel

Robustel R1511 User manual

Robustel

Robustel R3000-3P User manual

Robustel

Robustel EV8100 User manual

Robustel

Robustel R2110 User manual

Robustel

Robustel GoRugged R3000 Lite User guide

Robustel

Robustel GoRuggedR 3000 User manual

Robustel

Robustel GoFixed W800 User manual

Robustel

Robustel GoRugged R2000 User manual

Robustel

Robustel R1511 User manual

Robustel

Robustel GoRugged R3000 Lite User manual

Robustel

Robustel GoRugged R2000 User manual

Robustel

Robustel R1510 User manual

Robustel

Robustel GoRugged R3000 Lite Instruction Manual

Robustel

Robustel GoRugged R3000 Lite User manual

Robustel

Robustel GoRugged R2000 User manual

Robustel

Robustel R5020 User manual

Robustel

Robustel GoRugged R2000 User manual

Robustel

Robustel GoRugged R2000 User manual

Robustel

Robustel GoRugged R3000 Lite User manual

Robustel

Robustel R2110 User manual

Popular Network Router manuals by other brands

Allnet

Allnet ALL0333AU user guide

HomeSeer

HomeSeer HT-SEL Getting started guide

Sercomm

Sercomm Genesis OC3505D Quick installation guide

Billion

Billion BIPAC 5102 Series user manual

TP-Link

TP-Link TD-8817 QIG

Motorola

Motorola MR1900 user guide

Digi

Digi IX14 user guide

Cisco

Cisco NCS 540 Hardware installation guide

XAVi

XAVi X8821e user manual

BEC

BEC 6200WZL Quick installation guide

MikroTik

MikroTik hAP ac3 Series quick start

Korenix

Korenix JetNet 5428G Series user manual

NETGEAR

NETGEAR FS526T - Switch installation guide

Korenix

Korenix JetNet 5710G Series user manual

Automated Logic

Automated Logic ZN551 Technical instructions

Cisco

Cisco ASR 1000 Series Installation and configuration guide

EnGenius

EnGenius ESR-9710 quick start guide

Cisco

Cisco 805 Series Product overview