Robustel GoRugged R3000 Lite User manual

Robustel GoRugged R3000 Quick Guide

RT_QG_R3000_v.1.0.0 25.01.2014 1/8

Robustel GoRugged R3000 Quick Guide

Chapter1. Interface Introduction

1.1 LED Indicators

After inserting the SIM card into the router and power on, the LED indicators’status should be as follow when work

normally:

Note

：

Please refer to Robustel GoRugged R3000 User Guide to get more details about all the LED indicators.

1.2 Reset Button

Name

Status

RUN

Blinking

PPP

PPP connection is up: On

PPP connection is down: Off

RSSI

At least 2 bars

SIM

Function

Operation

Reboot

Push the button for 5 seconds under working

status.

Restore to factory

default setting

Push the button for 60 seconds once you power

on the router until all the three LEDs at the left

side (RUN, PPP, USR) blink at the same time for 5

times.

Reset Button

Robustel GoRugged R3000 Quick Guide

RT_QG_R3000_v.1.0.0 25.01.2014 2/8

1.3 PIN assignment

Debug

RS232

Power

Digital I/O

RS485

RXD

TXD

GND

TXD

RXD

RTS

CTS

Positive

Negative

GND

Input 1

Input 2

Output 1

Output 2

GND

Data+(A)

Data- (B)

1.4 Ethernet ports

Each Ethernet port has two LED indicators (please check the following picture). The green

one is Speed indicator and the yellow one is Link indicator. There are three status of each

indicator. Please refer to the form below.

Indicator

Status

Description

Link

Indicator

Off

10 Mbps mode.

100 Mbps mode.

Link

Indicator

Off

Connection is down.

Connection is up.

Blink

Data is being transmitted

Note: The power supply range is 9 to 60VDC.

Robustel GoRugged R3000 Quick Guide

RT_QG_R3000_v.1.0.0 25.01.2014 3/8

Chapter2. Hardware Installation

2.1 Insert SIM Card

SIM card is used for connecting to cellular network, you need buy SIM card from local operators.

1. Unscrew the screw and remove the cover.

2. Insert SIM card into one of the SIM card slot

(When SIM card is correctly inserted you will hear “a cracking sound”).

3. Screw the cover.

Note:

1. Don’t forget screw the cover for again-theft.

2. Don’t touch the metal surface of the SIM card in case information in the card is lost or destroyed.

3. Don’t bend or scratch your SIM card. Keep the card away from electricity and magnetism.

4. Make sure to disconnect the power source from your router before inserting and removing your SIM card.

5. Micro SD card is used for storing R3000’s log information, optional.

2.2 Connect Antenna

Connect router to an external antenna with SMA male connector. Make sure the antenna is for the correct frequency

as your GSM/3G/4G operator with impedance of 50ohm, and also connector is secured tightly.

Robustel GoRugged R3000 Quick Guide

RT_QG_R3000_v.1.0.0 25.01.2014 4/8

2.3 Power On and Connect with PC

Robustel GoRugged R3000 Quick Guide

RT_QG_R3000_v.1.0.0 25.01.2014 5/8

Chapter3. Initial Configuration

The router can be configured through your web browser. A web browser is included as a standard application in the

following operating systems: Linux, Mac OS, Windows 98/NT/2000/XP/Me/Vista/7/8, etc. The product provides an

easy and user-friendly interface for configuration.

There are various ways to connect the router, either through an external repeater/hub or connect directly to your PC.

However, make sure that your PC has an Ethernet interface properly installed prior to connecting the router.

You must configure your PC to obtain an IP address through a DHCP server or a fixed IP address that must be in the

same subnet as the router. The best and easiest way is to configure the PC to get an IP address automatically from

the router using DHCP. If you encounter any problems accessing the router web interface it is advisable to uninstall

your firewall program on your PC, as these tend to cause problems accessing the IP address of the router.

3.1 Configure PC in Windows

1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-click Network Connections.

2. Double-click Local Area Connection.

3. In the Local Area Connection Status window, click Properties.

Robustel GoRugged R3000 Quick Guide

RT_QG_R3000_v.1.0.0 25.01.2014 6/8

4. Select Internet Protocol (TCP/IP) and click Properties.

5. Select the Obtain an IP address automatically and Obtain DNS server address automatically radio buttons.

Robustel GoRugged R3000 Quick Guide

RT_QG_R3000_v.1.0.0 25.01.2014 7/8

6. Click OK to finish the configuration.

3.2 Connect Router with Internet

1. Open IE browser, input the default IP address of R3000http://192.168.0.1 -> Input “username” (default: admin)

and the “password” (default: admin) -> Click “login”.

Note: Before configuring your router, you need to know the following default settings.

Item

Description

Username

admin

Password

admin

Eth0

192.168.0.1/255.255.255.0, LAN mode

Eth1

192.168.0.1/255.255.255.0, LAN mode

DHCP Server

Enabled.

2. After succeed to login, go to tab “Cellular WAN” --> enter relevant correct ISP settings, such as APN, Username,

Robustel GoRugged R3000 Quick Guide

RT_QG_R3000_v.1.0.0 25.01.2014 8/8

Password, Dialup No. (you can check these information from local ISP ) --> click “Apply”-> click “Save”and

“Reboot”.

Note: After configure R3000 with new settings, you need to click “Apply”-> “Save”-> “Reboot”.

3. After above correct configuration, R3000 should succeed to establish PPP connection. You can go to tab

“Configuration”-> “Status”-> “System”to check whether “PPP”indicator is “ON”(ON means PPP connection

established).

4. R3000 can connect to Internet now.

Other manuals for GoRugged R3000 Lite

Table of contents

Other Robustel Network Router manuals

Robustel

Robustel GoRugged R3000 Lite Operating and maintenance instructions

Robustel

Robustel R2110 User manual

Robustel

Robustel R2110 User manual

Robustel

Robustel GoRugged R2000 Manual

Robustel

Robustel GoRugged R3000 Lite User manual

Robustel

Robustel R3000-3P User manual

Robustel

Robustel R3000-Q3PA User manual

Robustel

Robustel R1511 User manual

Robustel

Robustel R3000-3P User manual

Robustel

Robustel GoRugged R3000 Lite User manual

Robustel

Robustel R1511 User manual

Robustel

Robustel GoRugged R3000 Lite User guide

Robustel

Robustel R1510 User manual

Robustel

Robustel GoRugged R2000 User manual

Robustel

Robustel GoRugged R2000 User manual

Robustel

Robustel GoRugged R2000 User manual

Robustel

Robustel GoRugged R3000 Lite Instruction Manual

Robustel

Robustel R1520 User manual

Robustel

Robustel R5020 User manual

Robustel

Robustel GoRugged R3000 Lite User manual

Robustel

Robustel GoRugged R3000 Lite User manual

Robustel

Robustel GoRugged R2000 User manual

Robustel

Robustel R1500 User manual

Robustel

Robustel GoRugged R2000 User manual

Popular Network Router manuals by other brands

Allnet

Allnet ALL0333AU user guide

HomeSeer

HomeSeer HT-SEL Getting started guide

Sercomm

Sercomm Genesis OC3505D Quick installation guide

Billion

Billion BIPAC 5102 Series user manual

TP-Link

TP-Link TD-8817 QIG

Motorola

Motorola MR1900 user guide

Digi

Digi IX14 user guide

Cisco

Cisco NCS 540 Hardware installation guide

XAVi

XAVi X8821e user manual

BEC

BEC 6200WZL Quick installation guide

MikroTik

MikroTik hAP ac3 Series quick start

Korenix

Korenix JetNet 5428G Series user manual

NETGEAR

NETGEAR FS526T - Switch installation guide

Korenix

Korenix JetNet 5710G Series user manual

Automated Logic

Automated Logic ZN551 Technical instructions

Cisco

Cisco ASR 1000 Series Installation and configuration guide

EnGenius

EnGenius ESR-9710 quick start guide

Cisco

Cisco 805 Series Product overview