Robustel GoRugged R2000 User manual

Robustel GoRugged R2000 Dual Quick Guide

RT_QG_R2000 Dual_v.1.0.3 10.02.2017 1/23

Confidential

Installation and Configuration

Quick Guide

R2000 Dual--

Industrial Dual Module Cellular VPN Router with Power over Ethernet

Package Contents

Before installing the R2000 Dual Router, verify the kit contents as following:

1 x Robustel R2000 Dual Industrial Dual Module Cellular VPN Router with Power over Ethernet

1 x Terminal block for power

1 x Quick Start Guide with download link of other documents or tools

Optional Accessories (sold separately)

AC/DC power adapter

POE power adapter

SMA cellular antenna for 3G/4G LTE

Stubby/magnet RP-SMA Wi-Fi antenna

Wall mounting kit

35 mm DIN rail mounting kit

*If any of the above items is missing or damaged, please contact your Robustel sales representative*

Preparation before Testing

REQUIRED: R2000 Dual Router x 1, PC x 1, SIM card x 1, Ethernet cable x 1, SMA antenna x 2, power supply with

terminal block x 1

OPTIONAL: 35 mm DIN rail mounting kit x 1, M3*6 flat head Phillips screw x 3; or wall mounting kit x 2, M2.5*4 flat

head Phillips screw x 4, M3 drywall screw x 2

*The following pictures are just for illustration purposes only, not based on their actual sizes*

Robustel GoRugged R2000 Dual Quick Guide

RT_QG_R2000 Dual_v.1.0.3 10.02.2017 2/23

Confidential

Environmental Requirements

Power input: 9 to 48V DC

Power consumption: 100 mA@12 V in idle state

800 mA (peak)@12 V in communication state

Operating temperature: -40 to 70°C

Relative humidity: 5 to 95% RH

Robustel GoRugged R2000 Dual Quick Guide

RT_QG_R2000 Dual_v.1.0.3 10.02.2017 3/23

Confidential

Chapter 1 Hardware Introduction

1.1 Overview

1.2 Dimensions

Robustel GoRugged R2000 Dual Quick Guide

RT_QG_R2000 Dual_v.1.0.3 10.02.2017 4/23

Confidential

1.3 LEDs

Name

Color

State

Description

RUN

Green

On, 1/2 sec blink

Router is ready.

On, 1 sec blink

Router is booting.

Off

Router is powered off.

PPP

Green

LED 1 is on

SIM1 PPP connection is working.

LED 2 is on

SIM2 PPP connection is working.

USR

Green

OpenVPN: OpenVPN is connected.

IPsec: IPsec is connected.

Wi-Fi: Wi-Fi is connected.

Off

OpenVPN: OpenVPN is disconnected.

IPsec: IPsec is disconnected.

Wi-Fi: Wi-Fi is disconnected.

NET

(LED 1 stands for SIM 1,

LED 2 stands for SIM 2)

Green

On, blinking green

Unable to connect to the best network.

E.g. When R2000 Dual uses the 4G SIM card but

cannot connect to the 4G network, the NET LED

will always blink. The condition of 3G and 2G

network will, too.

On, solid green

Connect to the best network.

E.g. When R2000 Dual uses the 4G SIM card and

connects to the 4G network, the NET LED will turn

to solid green. The condition of 3G and 2G

network will, too.

Off

Unable to access any network.

Signal Strength

(Light 1 stands for SIM 1,

light 2 stands for SIM 2)

Green

All LEDs are on

Signal level: 21-31 (Optimum signal level)

Green

Two LEDs are on

Signal level: 11-20 (Average signal level)

Green

Only one LED is on

Signal level: 1-10 (Abnormal signal level)

When the network disconnected, those three signal LEDs are designed as a binary

combination code to indicate a series of error report.

On: 1 Off: 0

001 AT command failed

010 No SIM card detected

011 Need to enter the PIN code

Robustel GoRugged R2000 Dual Quick Guide

RT_QG_R2000 Dual_v.1.0.3 10.02.2017 5/23

Confidential

1.4 Reset Button

1.5 Ethernet Ports

R2000 Dual Router has five Ethernet ports. Eth0 is a WAN port and Eth1~Eth4 are LAN ports supporting POE feature.

Every Ethernet port has two LED indicators, while each indicator has three states. The yellow one is Link Indicator

and the green one doesn’t mean anything. For details see the table below.

Indicator

State

Description

Link Indicator

Connection is working

On, blinking

Data is being transmitted

Off

Connection is not working

100 Need to enter the PUK code

101 Registration failed

110 Something wrong happened in the module

Function

Operation

Reboot

Press and hold the Reset button for at least 2~7 seconds under the operating status.

Restore to factory

default settings

Wait for 5 seconds after powering up the router, press and hold the Reset button by a

small non-conductive stick with a blunt end until all twelve LEDs blinking one by one, and

release the button within 5 second to return the router to factory defaults.

Robustel GoRugged R2000 Dual Quick Guide

RT_QG_R2000 Dual_v.1.0.3 10.02.2017 6/23

Confidential

Chapter 2 Hardware Installation

2.1 Insert or Remove SIM Card

Insert SIM Card

1. Make sure the router is powered off.

2. To remove slot cover, loosen the screws associated with the cover by using a screwdriver and then find the SIM

card slot.

3. To insert SIM card, press the card with fingers until it snaps on.

4. Put back the slot cover and tighten the screws associated with the cover by using a screwdriver.

Remove SIM Card

1. Make sure the router is powered off.

2. To remove slot cover, loosen the screws associated with the cover by using a screwdriver and then find the SIM

card slot.

3. To remove SIM card, press the card with fingers until it pops out, and then take out the SIM card.

4. Put back the slot cover and tighten the screws associated with the cover by using a screwdriver.

Note:

1. Recommended torque for inserting is 0.5 N.m, and the maximum allowed is 0.7 N.m.

2. Use the specific M2M SIM card when the device is working in extreme temperature (temperature exceeding

0-40℃), because the regular SIM card for long-time working in harsh environment (temperature exceeding

0-40℃) will be disconnected frequently.

3. Do not forget to twist the cover tightly to avoid being stolen.

4. Do not touch the metal of the SIM card surface in case information in the card will lost or be destroyed.

5. Do not bend or scratch the SIM card.

6. Keep the SIM card away from electricity and magnetism.

7. Make sure router is powered off before inserting or removing the SIM card.

Robustel GoRugged R2000 Dual Quick Guide

RT_QG_R2000 Dual_v.1.0.3 10.02.2017 7/23

Confidential

2.2 Attach External Antenna (SMA Type)

Connect the SMA external antenna connector to the router’s antenna interface and twist tightly.

Make sure the antenna is within the correct frequency range provided by the operator and with 50 Ohm impedance.

Note: Recommended torque for mounting is 0.35 N.m.

2.3 Mount the Router

The R2000 Dual Router supports flat surface placement, wall mounting and DIN rail mounting.

(unit: mm)

Two methods for mounting the router

1. Wall mounting:

Use 4 pcs of M2.5*4 flat head Phillips screws to fix the wall mounting kits to the router, and then use 2 pcs of

M3 drywall screws to mount the router associated with the wall mounting kit on the wall.

Note: Recommended torque for mounting is 0.5 N.m, and the maximum allowed is 0.7 N.m.

2. DIN rail mounting:

Use 3 pcs of M3*6 flat head Phillips screws to fix the DIN rail to the router, and then hang the DIN rail on the

bracket. It is necessary to choose the standard bracket.

Note: Recommended torque for mounting is 1.0 N.m, and the maximum allowed is 1.2 N.m.

When mounting the kit onto the DIN rail, make sure that its metal springs are orientated towards the top

of the DIN rail.

Robustel GoRugged R2000 Dual Quick Guide

RT_QG_R2000 Dual_v.1.0.3 10.02.2017 8/23

Confidential

2.4 Ground the Router

Router grounding helps prevent the noise effect due to electromagnetic interference (EMI). Connect the router to the

site ground wire by the ground screw before powering on.

Note: This product is appropriate to be mounted on a sound grounded device surface, such as a metal panel.

2.5 POE Connection

R2000 Dual’s four fast Ethernet LAN ports support POE feature (Voltage range: 48 to 57V DC), which can electrify the

network terminal devices such as IP camera and other WLAN AP etc. See figure below for more details.

Robustel GoRugged R2000 Dual Quick Guide

RT_QG_R2000 Dual_v.1.0.3 10.02.2017 9/23

Confidential

2.6 Connect the Router to the PC

Connect the router’s Ethernet port (eth1/eth2/eth3/eth4) to a PC via a standard cross-over cable.

2.7 Power Supply

R2000 Dual Router supports reverse polarity protection, but always refers to the figure below to connect the power

adapter correctly. There are two cables associated with the power adapter. Following to the color of the head,

connect the cable marked red to the positive pole through a terminal block, and connect the yellow one to the

negative in the same way.

Note: The range of power voltage is 9 to 48V DC.

Robustel GoRugged R2000 Dual Quick Guide

RT_QG_R2000 Dual_v.1.0.3 10.02.2017 10/23

Confidential

R2000 Dual Router also supports POE feature. Please refer to the figure below to connect the power adapter

correctly.

Note: The range of power voltage is 48 to 57V DC.

Other manuals for GoRugged R2000

Table of contents

Other Robustel Network Router manuals

Robustel

Robustel GoRugged R3000 Lite User manual

Robustel

Robustel GoRugged R3000 Lite User manual

Robustel

Robustel GoRugged R3000 Lite User manual

Robustel

Robustel R2110 User manual

Robustel

Robustel R2110 User manual

Robustel

Robustel GoRugged R3000 Lite User manual

Robustel

Robustel R1520 User manual

Robustel

Robustel GoRugged R3000 Lite User manual

Robustel

Robustel GoRugged R2000 User manual

Robustel

Robustel GoRugged R2000 User manual

Robustel

Robustel EV8100 User manual

Robustel

Robustel GoRugged R2000 User manual

Robustel

Robustel GoRugged R2000 User manual

Robustel

Robustel R1510 User manual

Robustel

Robustel R3000-Q3PA User manual

Robustel

Robustel GoRugged R3000 Lite User manual

Robustel

Robustel GoRugged R3000 Lite User manual

Robustel

Robustel R3000-3P User manual

Robustel

Robustel GoRugged R2000 Manual

Robustel

Robustel GoRugged R3000 Lite User manual

Robustel

Robustel GoRugged R3000 Lite Operating and maintenance instructions

Robustel

Robustel GoRugged R2000 User manual

Robustel

Robustel GoRugged R3000 Lite Instruction Manual

Robustel

Robustel GoRugged R2000 User manual

Popular Network Router manuals by other brands

Allnet

Allnet ALL0333AU user guide

HomeSeer

HomeSeer HT-SEL Getting started guide

Sercomm

Sercomm Genesis OC3505D Quick installation guide

Billion

Billion BIPAC 5102 Series user manual

TP-Link

TP-Link TD-8817 QIG

Motorola

Motorola MR1900 user guide

Digi

Digi IX14 user guide

Cisco

Cisco NCS 540 Hardware installation guide

XAVi

XAVi X8821e user manual

BEC

BEC 6200WZL Quick installation guide

MikroTik

MikroTik hAP ac3 Series quick start

Korenix

Korenix JetNet 5428G Series user manual

NETGEAR

NETGEAR FS526T - Switch installation guide

Korenix

Korenix JetNet 5710G Series user manual

Automated Logic

Automated Logic ZN551 Technical instructions

Cisco

Cisco ASR 1000 Series Installation and configuration guide

EnGenius

EnGenius ESR-9710 quick start guide

Cisco

Cisco 805 Series Product overview