Riso VALEZUS T2100 User manual
User's Guide
VALEZUS T2100
T2_UG-EN_05
이 기기는 업무용 환경에서 사용할 목적으로 적합성평가를 받은 기기로서 가정용
환경에서 사용하는 경우 전파간섭의 우려가 있습니다.
이 기기는 업무용 환경에서 사용할 목적으로 적합성평가를 받은 기기로서 가정용
환경에서 사용하는 경우 전파간섭의 우려가 있습니다.
이 기기는 업무용 환경에서 사용할 목적으로 적합성평가를 받은 기기로서 가정용
환경에서 사용하는 경우 전파간섭의 우려가 있습니다.
이 기기는 업무용 환경에서 사용할 목적으로 적합성평가를 받은 기기로서 가정용
환경에서 사용하는 경우 전파간섭의 우려가 있습니다.
VALEZUS T2100 User’s Guide
JOINT UNIT
Model: JOINT UNIT G10
Model: Double Tray Feeder
Model: Double Tray Stacker L/R
Warning
This is a Class A product. In a domestic environment this product may cause radio interference in which case the user
may be required to take adequate measures.
Printers connected to the JOINT UNIT are Class B products. However, they are considered Class A products when used
as the system (a series of equipment configurations including the printers connected to the JOINT UNIT).
The user is cautioned that unauthorised changes or modifications not approved could void the user’s authority to operate
the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
CAN ICES-3(A)/NMB-3(A)
Perchlorate Material-special handling may apply,
See www.dtsc.ca.gov/hazardouswaste/perchlorate
This product may contain substances which are restricted when disposed.
Therefore, be sure to consult your contracted service dealer.
To ensure safety precautions, be sure to read this guide before
using the product. After reading this guide, keep it in handy for
future reference.
CAUTION
Um Vorsichtsmasnahmen zu treffen, lesen Sie sich vor
Gebrauch des Produkts das Handbuch durch. Halten Sie das
Handbuch nach dem Durchlesen stets griffbereit.
VORSICHT
1
VALEZUS T2100 User’s Guide
About This Guide
Prefaces
Thank you for purchasing the VALEZUS T2100.
The system, which consists of two print units, a coupling unit, and dedicated paper feed/stack units, is
referred to as VALEZUS T2100. The coupling unit is connected between two print units to efficiently perform
duplex printing. In this guide, the VALEZUS T2100 is described as "the system" and the coupling unit is
described as "JOINT UNIT".
The dedicated paper feed/stack units (Double Tray Feeder and Double Tray Stacker), which support high-
capacity paper feed and stack, allows you to run the system for long periods of time.
Please read this guide before using or when you have concerns while using, and make use of the system and
guide long for ever.
The guide is supplied with the system.
●User's Guide for the VALEZUS T2100 (this guide)
This guide describes handling precautions, specifications, features and functions of the system.
This guide also describes the troubleshooting method.
This guide describes required information about the system and the JOINT UNIT.
For basic usage of the printer, refer to the guides of the RISO printer below.
●Quick Guide
This guide describes basic usage of the printer and replacement of consumables.
●User's Guide
This guide describes handling precautions and specifications, as well as the operations and settings of each
function.
Read this guide for a more detailed understanding of the print unit.
●Administrator's Guide
This guide describes settings of the printer and dedicated equipment to be configured by the administrator.
●Troubleshooting Guide
This guide describes the actions to take when a paper jam or other problem occurs.
About This Guide
(1) This guide may not be reproduced in whole or in part without the permission of RISO KAGAKU CORPORATION.
(2) The contents of this manual may be changed without prior notice due to product improvements.
(3) RISO KAGAKU CORPORATION shall not be liable for any consequence of using this guide or the machine.
Trademark Credits
Windows is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other
countries.
PostScript is either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or
other countries.
, , VALEZUS, and FORCEJET are trademarks or registered trademarks of RISO KAGAKU
CORPORATION in the United States and other countries.
Other corporate names and/or trademarks are either registered trademarks or trademarks of each company,
respectively.
• Some of the features of the RISO printer may not be available in the system.
2
VALEZUS T2100 User’s Guide
■Symbols Used in This Guide
Indicates cautions that should be noted for safe use of this system.
Indicates important items that should be noted or are prohibited.
Indicates useful information or additional information.
■Names of Keys and Buttons
The names of physical keys on the operation panel, buttons on the touch panel screen, and buttons/items displayed on
the computer operation screen are indicated with square brackets [ ].
■Illustrations Used in This Guide
The screenshots and illustrations contained in this guide may vary depending on the usage environment, including the
connected dedicated equipment.
The various units can be used to extend functions of the system.
Symbols, Notations, and Screenshots Used in This Guide
Functions Available by Connecting the Dedicated Equipment
Function to be extended Required unit
High-capacity paper feed Double Tray Feeder
High-capacity paper stack Double Tray Stacker
Example: Press the [Stop] key. Example: Touch [Admin Menu]. Example: Click [Start].
●Operation Panel ●Touch Panel Screen ●Print Controller Operation
Screen
3
VALEZUS T2100 User’s Guide
Contents
About This Guide .........................................................................................................1
Symbols, Notations, and Screenshots Used in This Guide ............................................... 2
Functions Available by Connecting the Dedicated Equipment .......................................... 2
Safety Precautions .......................................................................................................6
Warning Symbols .............................................................................................................. 6
Power Plug ........................................................................................................................ 6
Installation Location ........................................................................................................... 6
Power Connection ............................................................................................................. 7
Ground Connection ........................................................................................................... 7
Handling ............................................................................................................................ 8
Before Use ....................................................................................................................9
Installation Location ........................................................................................................... 9
Power Connection ............................................................................................................. 9
Required Spacing ............................................................................................................ 10
Handling .......................................................................................................................... 11
Usable Paper ................................................................................................................... 11
Printable Area .................................................................................................................. 11
Part Names and Functions ........................................................................................12
The Whole System .......................................................................................................... 12
JOINT UNIT ..................................................................................................................... 12
Operation Panel .............................................................................................................. 13
Home Screen ...................................................................................................................14
What You Can Do with the System ...........................................................................15
System Configuration ................................................................................................16
Paper Feed Path ............................................................................................................. 18
Preparations ...............................................................................................................19
Power Supply ..................................................................................................................19
Admin Menu Settings ...................................................................................................... 19
Printing ........................................................................................................................20
Sending Print Data .......................................................................................................... 20
Dedicated Equipment .................................................................................................21
Double Tray Feeder ......................................................................................................... 21
Double Tray Stacker ........................................................................................................ 28
Troubleshooting .........................................................................................................34
Paper Jam ....................................................................................................................... 36
Precautions when Removing Jammed Paper ................................................................. 37
Error Message when Turning On the Power ................................................................... 37
Specifications .............................................................................................................38
Consumables ..............................................................................................................40
Ink Cartridges .................................................................................................................. 40
Vorsichtsmaßnahmen ................................................................................................42
4
VALEZUS T2100 User’s Guide
Warnsymbole ...................................................................................................................42
Netzstecker ...................................................................................................................... 43
Aufstellungsort ................................................................................................................. 43
Netzanschluss .................................................................................................................43
Masseanschluss .............................................................................................................. 43
Behandlung ..................................................................................................................... 44
Vor Inbetriebnahme ....................................................................................................45
Aufstellungsort ................................................................................................................. 45
Netzanschluss .................................................................................................................45
Abmessungen ................................................................................................................. 46
Behandlung ..................................................................................................................... 47
Verwendbares Papier ...................................................................................................... 47
Bedruckbarer Bereich ...................................................................................................... 47
Technische Daten .......................................................................................................48
Verbrauchsmaterial ....................................................................................................50
Tintenkartuschen ............................................................................................................. 50
5
VALEZUS T2100 User’s Guide
6
VALEZUS T2100 User’s Guide
Safety Precautions
This section describes the items that should be followed for safe use of this system. Be sure to read this
section before using the system.
To use the system properly and to prevent human injury and damage to properties, the following warning
symbols are used. Read the meaning of the symbols to understand and then read this guide.
Examples of symbols
Warning Symbols
WARNING Indicates that incorrect handling by ignoring this symbol may cause death or
serious human injury.
CAUTION Indicates that incorrect handling by ignoring this symbol may cause human
injury or damage to properties.
The symbol indicates a prohibited action. A specific prohibited action is drawn inside or
next to the symbol. (The figure on the left indicates that disassembly is prohibited.)
The symbol indicates a forced action or an instruction.
A specific instruction is drawn inside the symbol. (The left figure indicates an instruction to
remove the power plug from the electrical outlet.)
■In addition to the JOINT UNIT, printers and
dedicated equipment connected to the printers
also have power plugs.
CAUTION
■Place the system on a flat or stable surface.
Otherwise, the system may tilt or collapse and
cause human injury.
■Do not place the system in a dusty or humid
location. Otherwise, a fire or an electric shock
might occur.
Power Plug Installation Location
7
Safety Precautions
VALEZUS T2100 User’s Guide
WARNING
■Confirm the specification of the system's
power source and use the power source with
sufficient margin. Otherwise, a fire or an
electric shock might occur.
■The power consumption of the system
may get high. Make sure to take power
supply from multiple places instead of
from one place. If an extension cord is
absolutely required, do not use longer than 5m
(15ft).
Otherwise, a fire or an electric shock might
occur.
■Do not damage or rebuild the power
cord. Placing a heavy object on the cord
or pulling or forcibly bending the cord
may damage the cord, resulting in a fire or an
electric shock.
■Do not plug or unplug the power cord if your
hands are wet. Otherwise, an electric shock
might occur.
CAUTION
■Connect the plug securely to the optional
connection outlet on the printer main unit to
avoid a loose connection.
■Do not pull the power cord when unplugging it.
Otherwise, it could become damaged and a fire
or an electric shock might occur. Be sure to
hold on to the plug when unplugging the power
cord.
■If the system will not be used for a long time,
such as during a holiday, unplug the power
cord from the electrical outlet for safety.
■Remove the power plug from the electrical
socket at least once a year and clean the
prongs of the plug and their surroundings.
Dust collected on these areas can result in fire.
WARNING
■Be sure to insert the power plug with a
ground conductor into the wall outlet
with a ground receptacle.
Do not use the system if it is not grounded.
It may result in fire or electric shock.
Power Connection
Ground Connection
8
VALEZUS T2100 User’s Guide
WARNING
■Do not place water containers or metallic
objects on the system. If water drips inside the
system or a metallic object drops inside it, a
fire or an electric shock might occur.
■Do not remove the covers. Otherwise,
you might be electrically shocked by
the high-voltage part inside.
■Do not disassemble or rebuild the system by
yourself. Otherwise, a fire or an electric shock
might occur.
■Do not insert or drop any metallic material or
flammable substances into the system through
any opening. Otherwise, a fire or an electric
shock might occur.
■If something falls inside the system,
immediately hold down the [Power] key
on the operation panel to turn off the
operating power, and then turn off the main
power switches of both printers. Next, unplug
all of the power cords and contact your dealer
or authorized service representative.
Continued use might result in a fire or an
electric shock.
■In the unlikely event that the system
continues to be used while emitting
excessive heat, smoke, or a foul odor, a
fire or an electric shock might occur.
Immediately hold down the [Power] key on the
operation panel to turn off the operating power,
and then turn off the main power switches of
both printers. Next, be sure to unplug all of the
power cords and contact your dealer or
authorized service representative.
CAUTION
■Be careful of protruding parts and metal
terminals when inserting the hand inside the
JOINT UNIT and dedicated equipment such as
removing jammed paper. Otherwise, an injury
might occur.
■The inside of the system may have areas with
ink. Be careful not to let the ink come in
contact with your hands or clothing.
Should ink accidentally make contact with your
hands, wash it off with detergent as soon as
possible.
■When moving the system, contact your dealer
or authorized service representative.
If you try to forcibly move the system, the
machines may overturn, resulting in injury.
■
When using the Double Tray Feeder
C
aution! A Finger is caught.
Do not put your fingers in the opening in the main
body of the Double Tray Feeder.
Doing so may result in your fingers being caught
while the Double Tray Feeder moves.
Caution! Hot surface
Since the parts near the high temperature caution
label may be heated and cause burns, do not touch
the parts directly with your fingers.
Handling
Table of contents
Other Riso Printer manuals
Riso
Riso RISOGRAPH RN2000 User manual
Riso
Riso HC5500T User manual
Riso
Riso MiScreen Manual
Riso
Riso 9450 User manual
Riso
Riso GOCCOPRO QS2536 User manual
Riso
Riso HC5500 User manual
Riso
Riso HC5000 Product guide
Riso
Riso Print Gocco Arts User manual
Riso
Riso CZ180 Series User manual
Riso
Riso CV1200W User manual
Riso
Riso SF EII Series User guide
Riso
Riso HC5500 User manual
Riso
Riso HC5500T User manual
Riso
Riso Comcolor X1 Series User manual
Riso
Riso ComColor FT Series User manual
Riso
Riso Comcolor X1 Series User manual
Riso
Riso KZ30 User manual
Riso
Riso MZ870 User manual
Riso
Riso 9050 User manual
Riso
Riso ComColor FW Series User manual
