Risco LightSYS User manual

1

2

Note: The buttons on the wireless key fob are sensitive. Kindly handle the fobs with care to avoid false

alarms.

1 Activate

2 Deactivate

Emergency

button if

programmed

3 Partly Activate

4 Starts to flash

when the system

triggers an

alarm/fault

3

How can I activate the alarm?

(All the sensors in the house)

Option 1 (From the panel/keypad)

Press once and you can leave the house from the main door. The system will activate

in the time frame agreed with technician during the installation, so make sure you leave the

house by then.

Option 2 (From the Remote)

Press the button on the Wireless Remote (as indicated in number 1 in the above diagram)

and you can leave the house from the main door. The system will activate in the time frame

agreed with technician during the installation, so make sure you leave the house by then.

How can I partly activate the alarm? (Some of the sensors in the house only)

Option 1 (From the Panel)

Press once. If you are asked for the code, press your pin number and the system will

activate after the time frame agreed with technician during the installation, so make sure you

leave the activated area by then.

Option 2 (From the Remote)

Press the blank button (number 3 on the above diagram) on the Wireless Remote and the

system will then activate after the time frame agreed with technician during the installation, so

make sure you leave the activated area by then.

4

How can I deactivate the alarm? (All the sensors in the house)

Option 1 (From the Panel)

Input the code and Press

Option 2 (Using the Tag)

Place the token in front of button number 5.

Option 3 (From the Remote)

Press the button on the Wireless Key fob (As indicated in number 2 of the above diagram)

How do I Add, change or delete a passcode or tag from the system?

Add/Change the Pin Code:

Press once then press your pin code and

Press button x3

Confirm that the menu is on Codes/Tags

Press once

Confirm that the menu is on Define and press

Using the indicative arrows, scroll to the correct user (from 00 to 29 as set up during

installation) and press

5

Confirm that the menu is on Edit Code and press

Enter new code and press

Press x4 times to return to standby

To Delete a Code:

Press once then press your pin code and

Press button x3

Confirm that the menu is on Codes/Tags

Press once

Confirm that the menu is on Define and press

Using the indicative arrows, scroll to the correct user (from 00 to 29 as set up during

installation) and press

Confirm that the menu is on Edit Code and press –You will see 4 ****

To delete the code press 0000 and press

The screen will display - Accepted

Press x4 times to return to standby

6

Managing your alarm using the Smartphone application

If you would like to activate or deactivate the alarm from your smartphone, slide the tab to:

Partial (Yellow) to partly activate the alarm when you are at home

Armed (Red) to activate the alarm before you leave home

Disarmed (Green) to deactivate the alarm when you are at home.

For further instructions on how to use other features of the application, call our customer care

and we will guide you accordingly.

7

How do I know what is the fault in my system when the panel signals a fault notification?

In the event of a System Fault, the fault Led will flash on the main panel as indicated on

number 4 (on the above diagram) and the and the symbols flash on the screen.

To view the fault press left bottom button, enter code and press

Press down arrow button x2 and x2 and the system will indicate the issue.

Press left bottom arrow x3 to return to standby.

In case of assistance, call our Aftersales team and we will guide you accordingly.

If I am in a panic situation and I need to call for help, what can I do?

Press both for 3 seconds together and the system calls the police or alerts our

Central Monitoring System if applicable.

If the alarm rings, how can I know which sensor triggered it?

Enter pin code

Press and down arrow to know which sensor has triggered the alarm.

What do I have to press if there is a power cut to make sure that my alarm is set properly

when the electricity is back on?

The system acknowledges the fault and restores back to normal automatically.

8

How long does my battery backup last in the event of a power fail?

Usually for approximately 8 hours. It also depends if a maintenance service has been done in

the last 2 years.

I am thinking about changing my telephone provider, will it affect my alarm system?

It is very important to speak to Alberta technical representative to guide you way forward.

Can I add additional devices to my existing alarm systems and how do I go about doing so?

Yes, but it is ideal to speak to one of our representatives to know which is ideal for you.

Can I order a single alarm remote?

Yes this alarm system can take up to 16 Remotes.

Keep in Mind! Service your alarm at least once every two years to

make sure that the system is functioning properly.

9

Other manuals for LightSYS

13

Popular Security System manuals by other brands

Inner Range

Inner Range Concept 2000 user manual

Climax

Climax Mobile Lite R32 Installer's guide

CADDX

CADDX NX-6 user manual

FBII

FBII XL-31 Series installation instructions

Johnson Controls

Johnson Controls PENN Connected PC10 Install and Commissioning Guide

Aeotec

Aeotec Siren Gen5 quick start guide

Blaupunkt

Blaupunkt SA 2700 quick start guide

IDEAL

IDEAL Accenta Engineering information

AJAX

AJAX DoubleButton user manual

Swann

Swann SW-P-MC2 Specifications

Ecolink

Ecolink Siren+Chime user manual

Digital Monitoring Products

Digital Monitoring Products XR150 user guide

EDM

EDM Solution 6+6 Wireless-AE installation manual

Highway Safety Group

Highway Safety Group EA401 user manual

Siren

Siren LED GSM operating manual

Detection Systems

Detection Systems 7090i Installation and programming manual

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 instructions

Siemens

Siemens FDM273 manual