Ricoh SP3 User manual
1
RicohCo.Ltd.http://www.ricoh.com/
M080 Training - Sincere-P3
MODEL S-P3 TRAINING
Machine Code: M080
Version 1.0
This course is for the S-P3 printer.
Modifications
Started 28 March, 2011.
First draft 11 April, 2011.
Release version – 10 May, 2011.
2
RicohCo.Ltd.http://www.ricoh.com/
M080 Training - Sincere-P3
M080 Series Training
Model S-P3
1) Product Outline
No additional notes.
New model added (S-P1L).
The following slides were changed: Slides 2, 11
The following slides were added: Slides 20 to 27
2.028-2-2008
DescriptionVersion HistoryDate of change
3
RicohCo.Ltd.http://www.ricoh.com/
M080 Training - Sincere-P3
Exterior Components 1
1. Standard Paper Feed Tray
2. Paper Size Dial
3. Bypass Tray Extension
4. Bypass Tray
5. Operation Panel
6. Tray Extension
7. Standard Tray
8. Paper Exit Cover
9. Vents
10. Front Cover Release
Button
11. Power Switch
12. Friction Pad
(Descriptions below in the notes
section)
1. Standard Paper Feed Tray
500 sheet capacity
2. Paper Size Dial
Adjust according to the size and feed direction of the paper.
3. Bypass Tray Extension
Pull out when loading paper that is longer than B5 on the bypass tray.
4. Bypass Tray
100 sheet capacity
5. Operation Panel
Has keys for printer control and a display that shows the printer status.
6. Tray Extension
Pull out if loading paper longer than B5.
7. Standard Tray
Prints are delivered here print side down.
8. Paper Exit Cover
Open to remove jammed paper.
9. Vents
Heat is released through these vents.
10.Front Cover Release Button
Press to open the front cover.
11.Power Switch
Turns the power on and off.
12.Friction Pad
Clean it if multi-sheet feeds occur.
4
RicohCo.Ltd.http://www.ricoh.com/
M080 Training - Sincere-P3
Exterior Components 2
1. Controller Board
2. Rear Cover
3. Power Connector
4. Paper Tray Cover
5. Intake Vent
6. SD Card Slots
7. Optional Interface
Board Slot
8. Ethernet Port
9. USB Port B
10. USB Port A
(Descriptions below
in the notes section)
1. Controller Board
Install internal options (SDRAM, HDD) directly on the controller board. Plug in cables,
SD cards, and optional interface boards via slots and plugs (see 6 through 10).
2. Rear Cover
Remove to replace the fusing unit.
3. Power Connector
Connect the power cord here.
4. Paper Tray Cover
Keeps paper in the tray free of dust.
5. Intake Vent
Inlets for cool air. Instruct the user not to obstruct the intake vents. (Doing so can
result in malfunctions caused by build up of heat inside the printer.)
6. SD Card Slots
Remove the cover to install SD cards here.
7. Optional Interface Board Slot
Insert an optional Wireless LAN interface unit, Gigabit Ethernet board, or 1284
interface board in this slot.
8. Ethernet Port
Use to connect the printer to a network.
9. USB Port B
Use to connect the printer to a computer.
10.USB Port A
Use to connect optional USB devices such as the authentication card reader.
5
RicohCo.Ltd.http://www.ricoh.com/
M080 Training - Sincere-P3
Operation Panel
This is the new operation panel.
Number key pad
Upgraded Panel :
94-Line display
9Number keys
standard
Previous Model (S-P2)
The S-P3 has a number key pad, which enables users to input numbers such as
PIN codes easily.
6
RicohCo.Ltd.http://www.ricoh.com/
M080 Training - Sincere-P3
Interior Components
1. Controller case
2. Main motor
3. Engine board
4. Relay clutch
5. By-pass feed
clutch
6. Paper feed
clutch
7. Registration
clutch (behind
harness guide and
main motor board)
7
123
4
56
No additional notes.
7
RicohCo.Ltd.http://www.ricoh.com/
M080 Training - Sincere-P3
Product Lineage & Changes
Predecessor Models: Model S-P1c, Model S-P2
Current Model: Model S-P3 (M080)
New to Model S-P3 (relative to Model S-P2)
Operation panel
» 10-Key standard, 4-Line display
Eco sensor
Firmware
HDD (optional)
» comes with data overwrite security and encryption unit
Other service parts, including AIO, are common with S-
P2.
No additional notes.
8
RicohCo.Ltd.http://www.ricoh.com/
M080 Training - Sincere-P3
Eco Night Sensor
The printer will
automatically go
into Auto Off mode
if the Eco Night
Sensor detects a
low amount of
light in the room.
By default the Eco
Night Sensor is
inactive. It can be
turned on via the
Menu key.
Sensor
Menu
key
No additional notes.
9
RicohCo.Ltd.http://www.ricoh.com/
M080 Training - Sincere-P3
Basic Specifications - 1
Warm up time: 19 seconds or less
First print time: 6.9 seconds or less
Optional HDD capacity: 80GB
Built-in Connectivity
USB 2.0
Ethernet
Printing speed
36 ppm (A4-SEF) / 37 ppm (LT-SEF)
Printer memory
Standard: 256 MB
Maximum: 512 MB
No additional notes.
10
RicohCo.Ltd.http://www.ricoh.com/
M080 Training - Sincere-P3
Basic Specifications - 2
Maximum print width: A4/LT
Paper tray capacity
550 sheets (standard)
100 sheets (bypass tray)
Output tray capacity: 250 sheets
AIO Cartridge:
Average 15K/cartridge (A4/5% coverage)
Weight
17.5 kg / 38.6 lb (with AIO)
15.5 kg / 34.2 lb (without AIO)
Paper tray and output tray capacities assume 75 g/m2(20 lb) paper.
Other manuals for SP3
1
This manual suits for next models
1
Table of contents
Other Ricoh Printer manuals
Ricoh
Ricoh Priport DX 4640PD Service manual
Ricoh
Ricoh SP C360DNW User manual
Ricoh
Ricoh G112 User manual
Ricoh
Ricoh Aficio MP W3600 User manual
Ricoh
Ricoh SP204SF User manual
Ricoh
Ricoh Printer Service manual
Ricoh
Ricoh MFSP213SFNW1 User manual
Ricoh
Ricoh SP4100N - Aficio SP B/W Laser Printer User manual
Ricoh
Ricoh Priport JP8000 User manual
Ricoh
Ricoh SP C340DN User manual
Ricoh
Ricoh G108 User manual
Ricoh
Ricoh Aficio SP 1210N Setup guide
Ricoh
Ricoh Lanier AP206 User manual
Ricoh
Ricoh SP4100N - Aficio SP B/W Laser Printer User manual
Ricoh
Ricoh SP 210 User manual
Ricoh
Ricoh Ri 2000 User manual
Ricoh
Ricoh Lef-C1 Installation guide
Ricoh
Ricoh Pro C900 User manual
Ricoh
Ricoh M047 Installation guide
Ricoh
Ricoh MP 2501SP Instruction manual
