Ricoh FW770 User manual

FW740

Operating Instructions

RICOH

Power Source: 220 V, 230 V, 240 V, 50 Hz, more than 7 A

Please make sure to connect the power cord to a power source as

above. For details about power source, see page 43.

Power Consumption: 1.4 kW

BESCHEINIGUNG DES HERSTELLERS/IMPORTEURS

Hiermit wird bestätigt, daß der/die/das

RICOH FW740

(Gerät, Typ, Bezeichnung) In Übereinstimmung mit den Bestimmun-

gen der

163, Verfügung 1046/1984

(Amtsblattverfügung) funkenstört ist.

Der Deutschen Bundespost wurde das Inverkehrbringen dieses

Gerätes angezeigt und die Berechtigung zur Überprüfung der Serie

auf Einhaltung der Bestimmungen eingeräumt.

RICOH COMPANY, LTD. (Name des Herstellers/Importeurs)

For good copy quality, Ricoh recommends that you use genuine

Ricoh toner.

Ricoh shall not be responsible for any damage or expense that may

result from the use of parts other than genuine Ricoh parts in your

Ricoh office product.

In accordance with ISO Standard 7001, this machine uses the follow-

ing symbols for the main switch:

means POWER ON.

means POWER OFF.

means STAND BY

Note: Some illustrations may be slightly different from your machine.

Overseas Affiliates

U.S.A.

RICOH CORPORATION

5 Dedrick Place

West Caldwell, New Jersey 07006

(TEL) 201-882-2000

Netherlands

RICOH EUROPE B.V.

Groenelaan 3 P.O. Box 114

1180 AC - Amstelveen Holland

(TEL) 020-5474111

United Kingdom

RICOH U.K. LTD.

Ricoh House

1 Plane Tree Crescent, Feltham,

Middlesex, TW13 7HG

(TEL) 081-751-6611

Germany

RICOH DEUTSCHLAND GMBH

Mergenthalerallee 38-40,

65760 Eschborn

(TEL) (06196) 906-0

France

RICOH FRANCE S.A.

383 Avenue de General de Gaulle,

B.P. 307, 92143 Clamart Cedex

(TEL) 01- 4094-3838

Spain

RICOH ESPAÑA S.A.

Guitard, 45

08014 Barcelona

(TEL) 490-09-60

Italy

RICOH ITALIA S.p.A.

Via della Metallurgia, 12

(zona Basson) - 37139 VERONA

(TEL) 045-851 00 44

Hong Kong

RICOH BUSINESS MACHINES,

LTD.

23/F., China Overseas Building,

139, Hennessy Road,Wan Chai,

SAFETY INFORMATION

Safety During Operation

We’veidentifiedallsafetymessagesinthismanualwiththewords

warn-

ing

and

caution

. These words mean the following.

WARNING: Important information to alert you to a situation that might

cause serious injury and damage to your property if instructions are not

followed properly.

Caution: Important information that tells how to prevent damage to your

equipment, or how to avoid a situation that might cause minor injury.

WARNINGS

Since some parts of the copier are supplied with high electrical

voltage, touch only the parts specified in this manual.

Donotmodifyorreplaceanypartsotherthantheonesspecified

in this manual.

Do not incinerate toner or tonercontainers. Toner dustcould ig-

nite when exposed to open flames.

Do not store toner where it will be exposed to heat.

Do not eat or swallow toner, and keep itout of reach of children.

The fusing unit may be very hot. Be careful when handling it.

Whenmovingthecopieracrosstheroom,pushthecopiertable,

not the copier itself.

Cautions

While copying, do not turn off the main switch.

While copying, do not open orclose theoriginal table, the upper

unit, or any of the covers.

While copying, do not unplug the power cord.

Keep corrosive liquids, such as acid, off the machine.

Do not allow paper clips, staples, or othersmall metallic objects

to fall inside the machine.

General Safety Information

Always turn the copier off when you’ve finished copying for the

day, but leave it plugged in.

When the copier will not be used for a long period, disconnect

the power cord.

Ifthecopiermustbetransportedbyvehicle,pleasecontactyour

service representative.

This copier can only be installed by a qualified service repre-

sentrative.

When the copier is plugged in and the main switch is in the

Stand-by position, the anti-condensation heaters are on. In

case of an emergency, unplug the copier’s power cord.

COPYING

Making One Copy

To make a copy, you should first open the lower table of the copier (the

copy table); then pull out the original guides at the exit; place the copy

paper on the copy table; and last of all set the original on the top table of

the copier (the original table). When you’ve set the original, the copier

will take it in. Follow the steps below.

CAUTION: If during copying your original gets stuck in the copier,

press the Emergency Stop key .

1. Open the copy paper table.

2. Open the original guides but do

not force them.

3. If you want, set the image density

(page 7) and the leading edge

margin (page 8) or change the

copymediasetting(page13).

4. Set the copy and original guides

(option) on the copy table to

match the size of your copy pa-

per and your original.

* Original guides are shown closed

to keep illustrations clear.

5. WaituntiltheSetPaper indicator

lights up on the operation panel.

6. Place the sheet of copy paper on

the copy table. Slide the paper

straight into the copier until it stops.

The copier will soon pull it in. Once

the paper is set, the beeper will

sound.

7. Wait until the Set Original indi-

cator lights up on the operation

panel.

8. Center your original face up on

the original table. Slide the origi-

nal straight into the copier until

the copier pulls it in.

COPYING Making One Copy

9. The original comes out from the

opening just under the original

table

.Thecopyisdeliveredfrom

theslotontopofthecopier



About the original guides...

The original guides you pulled out at the exit keep the original from going

into the copy paper entrance. Always use the original guides with originals

thinner than 0.1 mm, with very long originals, or with very curly originals.

When sliding the original into the copier...

When inserting the original in the copier, slide it in carefully, but quickly.

Otherwise, the original might skew as it goes through the machine.



Making One Copy COPYING

Copying With The Roll Feeder

To make a copy using the roll feeder option, you do not need to set pa-

per on the copy table; the paper will be fed to the copier from the roll

feeder. You should first input the paper length and other settings, then

press the RF Select key , and lastly place the original on the top ta-

ble (the original table). Follow the procedure below.

1. Setthe originalguides(option)to

match the size of your original.

2. Follow the key strokes below.

If you want to change the size, press

the +and -keys until the size you want

appears in the display.

Press the Preset Cut key to choose a

paper length. The length appears in the

display, in millimeters.

If you want, set the image density

(page 7) and the leading edge mar-

gin (page 8) or change the copy me-

dia setting(page 13).

Press the Function Select key until

thearrowpointsatPaperLength.

COPYING Copying With The Roll Feeder

3. When the RF Select indicator

lightsuponthepanel,presstheRF

Select key. The roll feeder starts.

Once the copier has set the copy

paper,thebeeperwillsound.

4. Wait until the Set Original indi-

cator lights up on the operation

panel.

5. Place your original face up on

the original table. Slide the origi-

nal straight into the copier until

the copier pulls it in.

6. The original comes out from the

opening just under the original

table

.Thecopyisdeliveredfrom

theslotontopofthecopier



¬

Copying With The Roll Feeder COPYING

Other manuals for FW770

Table of contents

Other Ricoh Printer manuals

Ricoh

Ricoh Lanier LDD 030 User manual

Ricoh

Ricoh Pro 907 Operating instructions

Ricoh

Ricoh DDP 70e Operating instructions

Ricoh

Ricoh Aficio SP C311N User manual

Ricoh

Ricoh SP 200 User manual

Ricoh

Ricoh PRO C7200 Installation guide

Ricoh

Ricoh MP CW2200SP User manual

Ricoh

Ricoh Ri 100 Original instructions

Ricoh

Ricoh Aficio CL3000 Manual

Ricoh

Ricoh 9050b User manual

Ricoh

Ricoh Pro C900s Original instructions

Ricoh

Ricoh CL7000 - Aficio D Color Laser Printer User manual

Ricoh

Ricoh Aficio 2035e User manual

Ricoh

Ricoh Printer User manual

Ricoh

Ricoh Pro C9200 User manual

Ricoh

Ricoh Aficio SP 3400SF Quick start guide

Ricoh

Ricoh Aficio SP C431DN-HS User manual

Ricoh

Ricoh Pro 8300 Series Installation guide

Ricoh

Ricoh BP20 - Aficio B/W Laser Printer User manual

Ricoh

Ricoh LS3000 User manual

Ricoh

Ricoh SP C360DNW User manual

Ricoh

Ricoh Pro L4130 Installation instructions

Ricoh

Ricoh 220-240 V User manual

Ricoh

Ricoh Z-P2 Quick start guide

Popular Printer manuals by other brands

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series quick start guide

Evolis

Evolis Elypso user guide

Kyocera

Kyocera FS-9530DN specification

Canon

Canon LASER SHOT LBP-1210 Specifications

Samsung

Samsung BIXOLON SRP-350plusF user manual

Canon

Canon PIXMA PRO-1 Series Getting started

Canon

Canon PIXMA G3560 Online manual

Dell

Dell Color Laser Printer 2130cn user guide

Tektronix

Tektronix Phaser 840 user guide

Epson

Epson ET-7750 Programming guide

Canon

Canon CLBR 460ps Service manual

Eltron

Eltron P210 Guide manual

Epson

Epson SC-F7100 series user guide

Epson

Epson Stylus C40UX Service manual

Canon

Canon imagePASS-A2 Service guide

Canon

Canon S820D user guide

IRA3D

IRA3D POETRY4 Original instructions