Ricoh Aficio 3228C User manual

SCANNER ACCESSIBILITY OPTION

(Machine Code: G570)

INSTALLATION PROCEDURE

For Machine code:

B178/B180/B202 Copiers

NOTE: THE SCANNER ACCESSIBILITY OPTION MUST BE INSTALLED BY

A CUSTOMER SERVICE REPRESENTATIVE WHO HAS

COMPLETED THE TRAINING COURSES ON THE BASE COPIER

AND THE SCANNER ACCESSIBILITY OPTION.

G5708560

INSTALLATION REQUIREMENTS

Machine Level

Front to back: Within 5 mm (0.2")/ 5°

Right to left: Within 5 mm (0.2")/ 5°

Location Requirement

Put the scanner on the right side of the mainframe as shown.

NOTE: 1) Make sure that the scanner is placed 660~724 mm above the floor.

2) Make sure that the scanner cable does not touch the floor.

3) Make sure to tell the user not to let the scanner cable get caught in

things such as a wheelchair. .

Requirement Condition

Attach the platen cover option to the mainframe to cover the exposure glass.

Install the scanner on a solid base. Do not install the scanner in areas where the

unit can fall down when the ADF cover is opened.

Make sure you install the unit in areas that let the user get easy access to operate

the unit. Ask the customer what their requirements are before you install the unit.

G570I311.WMF

ACCESSARY CHECK

Check the accessories and their quantities against the following list.

Description Q’ty

1. Exposure Glass Cleaner Holder ............................................ 1

2. Exposure Glass Cleaner........................................................ 1

3. M3 x 6 screw.......................................................................... 12

4. M3 x 8 screw.......................................................................... 1

5. Ground screw ........................................................................ 1

6. Core....................................................................................... 2

7. Left support............................................................................ 1

8. Right stay............................................................................... 1

9. Bracket................................................................................... 1

G570I300.WMF

1 2 3 456

INSTALLATION PROCEDURE

NOTE: This installation procedure uses the following symbols.

!: Screws ": Connectors #: Clamps

!CAUTION

Unplug the copier power cord before you do the following procedure.

1. Remove the all tapes.

2. Remove rear cover [A] (!x 5).

3. Remove the ground cable [B]

(!x 2).

4. Remove the duct [C]

(!x 2, "x 1).

G570I301.WMF

G570I302.WMF

[A]

[B]

[C]

5. Remove the DF connector cable [A] (!x 2, "x1).

NOTE: Keep these screws. You will use these screws later.

6. Remove the connector bracket [B].

7. Disconnect the connector [C] of the IPU harness and release the clamp [D].

8. Remove the core [E] from the I/F cable.

NOTE: Keep this core. You will use this core later.

9. Disconnect the I/F cable [F] from the IPU (!x 2). Then put it inside the

machine.

10. Disconnect the harness [G] from the scanner unit to the SIO ("x 3, #x 1).

Then put this harness inside the scanner frame.

11. Connect the connector of the DF connector cable [H] to the SIO board.

12. Bind the IPU harness [I] and DF connector cable [H] with the clamp [J]. Keep

these in the machine.

13. Attach the connector bracket [K] to the SIO board to keep this bracket.

G570I303.WMF

G570I304.WMF

[A]

[B]

[C]

[D]

[E]

[F]

[G]

[H]

[I]

[J]

[K]

14. Disconnect the PSU cable connector [A].

15. Detach the SIO board with bracket [B] (!x 4). Then slide it to the right slightly.

16. Attach the bracket [C] (!x 5).

17. Attach the SIO board with the bracket again (!x 4).

18. Attach the right support [D] (!x 2).

19. Attach the left support [E] (!x 2).

G570I305.WMF

G570I306.WMF

[A]

[B]

[C]

[D]

[E]

20. Put the I/F cable [A] through the opening on the frame. Then attach the core [B]

to the I/F cable.

21. Connect the I/F cable connector [C]. Then attach the cable holder [D] (!x 1)

and the ground [E] (!x 1) to the frame.

22. Put the IPU cable [F] through the opening on the frame. Then attach the two

cores [G] to the IPU cable.

23. Connect the IPU cable connector [H] and attach the ground [I] (!x 1).

G570I307.WMF

G570I308.WMF

[A]

[B]

[C][E]

[D]

[F]

[G]

[H]

[I]

24. Connect the PSU cable connector [A] and attach the ground [B]

(ground screw x 1).

25. Attach the scanner bracket [C] to the supports (!x 3) and the ground [D] (!x

1).

26. Install the duct (!x 2, "x 1) and ground cable (!x 2).

27. Cut the panel [E] surrounded with

the cutout line.

NOTE: File the edge of the cutout

line.

28. Make the hole [F] for a screw on the

rear cover with a screwdriver.

29. Attach the rear cover

(M3x8 screw x 6).

G570I309.WMF

G570I310.WMF

[A]

[B]

[C]

[D]

[E]

[F]

Other manuals for Aficio 3228C

This manual suits for next models

Table of contents

Popular Printer Accessories manuals by other brands

Star Micronics

Star Micronics TSP800 Series install guide

REA

REA JET HR pro 2K user manual

HP Laserjet,Color Laserjet 4si user guide

oliser

oliser MS 45 instructions

Roland

Roland DU2-64 Supplementary manual

Xerox

Xerox EFI EXP6000 Specification sheet

Canon

Canon Finisher-T1 Service manual

Sharp

Sharp FO-1MK Service manual

Labelmate

Labelmate PM-300 user manual

Epson

Epson T6248 Product information sheet

Epson

Epson OT-BZ20 user manual

Canon

Canon TonerRobot EP-27 instruction manual

GBC

GBC 16 Series user guide

Canon

Canon INNER 2-WAY TRAY-E1 INSTALLATION PROCEDURE

Develop

Develop SD-509 installation manual

Kyocera

Kyocera KM-6230 Instruction handbook

Triumph Adler

Triumph Adler DF-710 Instruction handbook

Citizen

Citizen CBM-202PC Series user manual