Ricoh TK2000 User manual
Paper Feed Unit TK2000
(Code: M406)
For Machine Code: M109
INSTALLATION GUIDE
1
CAUTION:
The printer weighs approximately 41
kg (90.4 lb.). When moving the printer,
use the inset grips on both sides, and
lift slowly in pairs. The printer will
break or cause injury if dropped.
Lifting the paper feed unit carelessly
or dropping may cause injury.
It is dangerous to handle the plug with
wet hands. Doing this may result in re-
ceiving an electric shock.
Before moving the printer, unplug the
power cord from the wall outlet. If the
cord is unplugged abruptly, it could
become damaged. Damaged plugs or
cords can cause an electrical or fire
hazard.
•
•
•
•
When attaching multiple options,
attach the paper feed unit first.
To attach two or three paper feed
units at the same time, first stack
them one upon the other, and then
attach them as a single unit.
Do not place the printer directly on
the floor.
•
•
•
Check the contents of the package.
CSJ231
Turn the printer off and unplug
the power cord.
Remove the packaging from the
paper feed unit.
Lift the printer using the inset
grips on both sides of the printer.
CSJ220
When moving the printer, do not
hold on the following parts as doing
so could cause a malfunction:
The handle onto the standard
paper feed tray.
The underside of the bypass tray.
•
•
2
There are three upright pins on
the optional paper feed unit.
Align them with the holes on the
underside of the printer, and then
carefully lower the printer.
CSJ219
Plug in the power cord, and then
turn on the printer.
Print the configuration page to
confirm that the unit was at-
tached correctly.
© 2012-2014
Printed in China
EN GB EN US EN AU M406-8600A
To confirm whether the optional
paper feed unit was correctly at-
tached, print the configuration page,
and check “Attached Equipment” on
the configuration page. If the unit
was attached correctly, “Tray 2”,
“Tray 3”, and “Tray 4” will appear.
For more information about printing
the configuration page, see “Test
Printing”, Operating Instructions.
If the optional paper feed unit was
not installed properly, repeat the
procedure from the beginning. If it
cannot be installed correctly even
after reattempting installation,
contact your sales or service repre-
sentative.
To use the paper feed unit, configure
the printer options in “Accessories”
in the printer driver. For details
about opening “Accessories”, see
“Configuring Option Settings for
the Printer”, Driver Installation
Guide.
•
•
•
•
Other Ricoh Printer Accessories manuals
Ricoh
Ricoh Container Stacker Manual
Ricoh
Ricoh LASER FACSIMILE User manual
Ricoh
Ricoh 3800C Series User manual
Ricoh
Ricoh LCIT RT5100 Quick start guide
Ricoh
Ricoh SH3070 Quick start guide
Ricoh
Ricoh Infotec 4151 User manual
Ricoh
Ricoh BY5020 Quick start guide
Ricoh
Ricoh BN1040 Quick start guide
Ricoh
Ricoh Aficio 3030 User manual
Ricoh
Ricoh PB3280 Quick start guide
Ricoh
Ricoh G222 Operating manual
Ricoh
Ricoh DU5040 Quick start guide
Ricoh
Ricoh Priport DX 4640PD User manual
Ricoh
Ricoh Priport HQ7000 User manual
Ricoh
Ricoh D392 Installation guide
Ricoh
Ricoh 7000 User manual
Ricoh
Ricoh Da-P1 Quick start guide
Ricoh
Ricoh A-P3 User manual
Ricoh
Ricoh CH-C1 Service manual
Ricoh
Ricoh 120LDS User manual
